HPE Community
ProLiant Servers - Netservers
1758556 Members
1600 Online
108872 Solutions
New Discussion

Who Me Too'd this topic

Guybrush68
Visitor

‎12-17-2020 10:21 AM

‎12-17-2020 10:21 AM

SmartArray E208i-p SR Gen10 on HP MicroServer Gen10 Plus not booting :-(

Hello everybody,

tried to install a brand new E208i-p SR contoller in my Microserver Gen10 Plus server and now the server won't boot anymore. It's stuck in POST boot mode and crashes befor I'm able to boot System Setup Utilities or any other OS/device.

I was able to flash the controller in a non-HPE system under Windows 10 Pro to the most current FW (3.21) but nothing changed. Any idea what else I could try?

  • System ROM U48 v2.20 (10/27/2020)
  • Controller FW v3.21 (12/16/2020)

Error message in IML:

Uncorrectable PCI Express Error Detected. Slot 1 (Segment 0x0, Bus 0x0, Device 0x1, Function 0x0). Uncorrectable Error Status: 0x4000 Recommended Action Update the firmware of the failing device. If the issue persists, replace the device.

 

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.