iLO Amplifier not sending E-Mail Alerts

[DoJu]

Hi All,

We are running iLO Amplifier Pack Version 2.12 and have enabled / configured Alert Settings / Email Settings

However iLO Amplifier not sending E-Mail Alerts

Despite entering the SMTP Server, port, authentication

Not even sending a Test Alert is received.

Where are the logs for troubleshooting purposes????

Thank you!

[Suman_1978]

Hi,

I hope the following documents helps:

iLO Amplifier Pack - Configuring the iLO Amplifier Pack Appliance
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00030240en_us

iLO Amplifier Pack - Frequently Asked Questions (FAQs)
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00029513en_us

HPE InfoSight for Servers Getting Started Guide
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00063441en_us

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[karl00]

Hi DoJu,

Were you successful in getting the emails out? I am having the same issue and went through the documentation listed but Im not able to see any email alerts at all. 

Karl

[anonymus13]

I have a similar problem, my system does send emails, but not hardware alerts.

[Sunitha_Mod]

Hello @anonymus13, 

Thank you for posting! We have responded to your primary post here. Please check and reply to the primary thread if you need further assistance. 

@karl00  Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button, so the experts can check and help you. 

[SCORELab]

Hi

Sorry for digging up this old thread but I have to jump on the bandwaggon,

Oud iAP does not send Emails either.

I tracked it down (via tcpdump) that iLO Amplifier does NOT use a fqdn for EHLO during SMTP, which our SMTP server reject.s Dear @HPE, how can I convince the iAP to actually use an FQDN for EHLO?

Best regards.