- Community Home
- >
- HPE Community, Taiwan
- >
- 儲存設備
- >
- 磁碟陣列
- >
- RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
類別
Company
Local Language
論壇
討論平台
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
論壇
部落格
- 訂閱此主題的RSS 提要
- 將此主題標記為未讀
- 將主題標記為已讀
- 將主題在本帳號置頂
- 標示為書籤
- 訂閱此主題
- 列印此頁
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-15-2006 03:54 PM
在 04-15-2006 03:54 PM
RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
HBA:A6795A(2Gbps Tachyon XL2 PCI Fibre Channel HBA)
OS:HP-UX 11.23
Array:HP MSA1000,單一Controller,2/3 Hub模組
請問各位,上述軟硬體直接連接,中間沒有san switch,MSA1000切一個LUN給HOST,在OS端使用ioscan確認光纖卡/dev/td0運作正常,就是看不到新增LUN.syslogd顯示(0/2/1/0: WARNING: It appears that there are (or were) more than one device with the same address (nport ID) setting of 0x0. One of them will be ignored.
請問有人知道是怎麼回事嗎? 謝謝
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-16-2006 03:24 AM
在 04-16-2006 03:24 AM
RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
In HPUX,
#/opt/fcms/bin/fcmsutil /dev/td0
In MSA1000 CLI,
"SHOW TECH_SUPPORT"
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-16-2006 07:16 AM
在 04-16-2006 07:16 AM
RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
HP MSA1000 firmware : 448.
In MSA1000 CLI=> show connections
可以看到 A6795A 的 WWPN,初步判定光纖連接無問題.
我研究了一下Brocade的光纖文件,發現環境中使用Hub的話,就要使用 Loop方式, N_port id 好像必須 0-125,Loop內的每個id都不能一樣,在比對我上述syslogd的內容說有device id 重複, 我在想是否是這個關鍵導致 LUN被系統忽略了.我有請教過HP 的MSA1000公程師,基本上都推薦整個環境最好是有SAN SWITCH,不過早期根本沒有SAN SWITCH這個東西,我在想應該還有其它方式,不一定需要SWITCH才行.
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-16-2006 07:43 AM
在 04-16-2006 07:43 AM
RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
PRIVATE_LOOP.(FCAL, no switch)
The host bus adapter is attached to a
loop/loopback hood.
PUBLIC_LOOP. Supported by TACHYON TL, TACHYON XL2,
DUAL PORT and FC/GigE Combo cards. The host adapter is
attached to a loop connected to a Fibre Channel switch.
可以看一下你的設定嗎
/opt/fcms/bin/fcmsutil device_file get remote {all|remote-N-Port-ID}
Note: The remote-N-port-ID can be substituted with -l loop_id (in Private Loop), or -w wwn for all options that take remote-N-port-ID as an argument. The devstat all option displays the loop_id (in Private Loop) and the nport_id (in Fabric) along with the statistics for all N_Ports the initiator was able to communicate with.
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-20-2006 09:05 AM
在 04-20-2006 09:05 AM
RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
# fcmsutil /dev/td0
Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x020700
N_Port Node World Wide Name = 0x50060b00005ff4eb
N_Port Port World Wide Name = 0x50060b00005ff4ea
Driver state = ONLINE
Hardware Path is = 0/2/1/0
Number of Assisted IOs = 591
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 2048
Driver Version = @(#) libtd.a HP Fibre Channel Tachyon XL2 Driver B.11.23.02 (AR0304) /ux/kern/kisu/TL/src/common/wsio/td_glue.c: Jan 9 2004, 11:39:48
# fcmsutil /dev/td0 get remote all
Target N_Port_id is = 0x020600
Target state = DVS_UNOPENED
Symbolic Name =
Port Type = N_PORT
Target Port World Wide Name = 0x500805f3001b04f1
Target Node World Wide Name = 0x500805f3001b04f0
Common Service parameters (all values shown in hex):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Version_Hi: 20 ; Version_Low: 9
BB_Credit: 0 ; Ciro: 1
Alt_BBcred: 1 ; Rxsz: 800
Conseq: ff ; RO_Bitmap: fe
Resolution: 0 ; EDTOV(ms): 0
Vendor version (in hex) 51435143 31303020 400 0
-------------------------------------------------------------
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 04-25-2006 08:55 AM
在 04-25-2006 08:55 AM
RX1600 & HP UX 11.23 看不到 MSA1000 的 LUN
- 將文章標記為未讀
- 標示為書籤
- 訂閱此主題
- 靜音
- 訂閱此主題的RSS 提要
- 高亮顯示此文章
- 列印此文章
- 提報不當內容
在 08-14-2007 04:59 PM
在 08-14-2007 04:59 PM