Posted to: ProLiant Servers (ML,DL,SL)
yesterday HiI have a DL380 Gen10 ServerEarlier i bought a u.2 backplane (826689-B21) + U.2 NVME enablement kit (873732-B21) and installed 8x3.84 TB U.2 Drivesand restarting the server: they are working well but i can't configure them to work as RAID (The drive... Posted to: HPE OneView
11-27-2023 As regular SPPs are only released by HPE few times a year, I usually take the provided SPP + Supplements ISO in OneView/vLCM. On the SPP download side there are now:Existing Base SPPs:Gen10 SPP 2023.09.00.00 with file P64606_001_gen10spp-2023.09.00.0... Posted to: ProLiant Servers (ML,DL,SL)
Tuesday The client recently had the Smart Array P440ar controller replaced about 2 months ago. The client is complaining of slowness issues. The one yellow flag I'm seeing so far is that there are not status messages in the Smart Storage Administrator. I... Posted to: ProLiant Servers - Netservers
yesterday Hi HPE!I am in trouble and need support from you. It looks like I am out of ideas, as are other third-party internet board members.This is the original thread on Reddit. And this is the second thread on the STH board. Long story short, I got two of t... Posted to: HPE SimpliVity
4 hours ago Hello,i've a problem wth FLR for the VM (Windows 2022 file serveur)VM has 3 virtual disks:1 system 80GB no dynamic2 File share 100GB no dynamic3 File share 850GB no dynamicThe 3d disk was clonned from previsius VM File server (Win2012).And now when i... Posted to: ProLiant Servers (ML,DL,SL)
yesterday Question about DL380Gen11 12EDSFF chassis and EDSSF NVMe drives. There is 12 slots, which controller are the drives connected to? QuickSpec state that DL380 Gen11 12EDSFF NC CTO P52536-B21 have Embedded SW RAID with 14 SATA ports (12-ports accessible... Posted to: HPE Storage Networking - Switches
05-07-2023 Greetings Dear Friends,I can not download the firmaware of the HPE SN2010M storage switch, I have two switches, it was purchased by my company, unfortunatelydid not come with the same version of firmaware, without upgrading they can not form the clus... Posted to: HPE OneView
10-31-2023 Hello folks! I am having an issue with two different brand-new installations independent of each other. After I successfully added my server to HPE OneView and applied the latest firmware I received the following error on all the servers: Unable to f... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hello, my Server doesn`t work again. During working the server did shut down. CPU P2 was extremly hot. More than P1.After waiting approx 30Min nothing happened. Behind P2 the LED CR8 is flashing 12x short/1x long.Status LED at the front is flashing c... Posted to: ProLiant Servers (ML,DL,SL)
Tuesday Hi,I have an issue where my ILO keeps losing connection randomely, After troubleshooting with HPE the problem came from my enterprise security scanner.HPE told me the limitation is around 200, more and glitches and disconnection will occur, when that...
