Posted to: ProLiant Servers (ML,DL,SL)
yesterday Hello.I am using the HPE DL380 Gen10 product. (Product warranty expired)I was informed that a particular customer had a failure and was using an SSD that corresponds to HP SSD FIRMWARE ISSUE.SSD in use: HPE 960GB SAS SFFRI SC DS SSD (875682-001)I was... Posted to: Software - General
5 hours ago Hi all,So my network looks like this : Core switch>>> Access Switch >> Unmanaged switch or Arupa WirelessDHCP is configured on the core switch. There was ip subnet change done. I can still see a few devices trying to connect using the old IP range.I...
Posted to: Insight Remote Support
47m ago Creative Industries stands as a beacon of innovation among Noodles Making Machine Manufacturers. Our dedication to excellence resonates through our state-of-the-art manufacturing facility, where precision meets creativity. With a steadfast commitment... Posted to: Insight Remote Support
Monday 안녕하세요 문의가 있어서 글을 올렸는데요 Last Failure Reason 항못에서 Hot Removed (0x14) 떠 있을경우 디스크에 문제가 있다고 판단 될수 있나요??? os 로그에서 에러가 발생하였는데 디스크에서나 ilo 에서는 확인이 안되서요 Google Translated: Last Failure Reason Hot Removed (0x14) in adu report Is this a bad sector issue??hello... Posted to: Servers - General
2 hours ago (Hdd 146GB x 2)하드가 인식 안되는거 같은데 Array 400 인 경우 펌웨어 업데이트 말고는 바이오스 업데이트로는 안되나요? 바이오스 업데이트를 해야되면 지원 받길 원합니다. Google Translated: (Hdd 146GB x 2) I don’t think the hard drive is recognized, but it is Array 400. Can't I just update the BIOS other than the ... Posted to: ProLiant Servers (ML,DL,SL)
yesterday Hallo, ich habe hier einen DL380 GEN 11 mit HPE NS204i-u Gen11 Boot Controller und bekomme Windows nicht installiert. Über Intelligent Provisioning bekomme ich den Fehler: Windows cannot find the Microsoft Software License Term. Make sure the instal...
Posted to: Feedback
2 hours ago
Posted to: ProLiant Servers (ML,DL,SL)
22 hours ago I have a few ilo5 units that are no longer reporting hardware issues through SNMP to my monitoring system. All the units stopped reporting within a few days of each other. I suspect this issue might be related to a recent firmware update.When running... Posted to: ProLiant Servers (ML,DL,SL)
11 hours ago Hi HPE Peeps,We have an ML350 Gen11 with the 4416+ and customer asked if we could upgrade from the 4416+ to a 5520+. I remember in Gen9 you could flash the system to upgrade from the old E5-2600 V3 to V4 and in Gen10 there was no issue updating an e... Posted to: ProLiant Servers (ML,DL,SL)
19 hours ago is xeon e5 2667 v4 compatible with hp dl 160 gen 9?can`t find it in the compatibility listpower is fully reduntant, 2x900w.
