Posted to: Servers - General
10m ago Dear all,We have configured RAID 5 using HPE 6.4TB SAS 24G Mixed Use SSD(P49057-B21/)We have 8 SSD disk and created RAID 5 with the controller MR416i, the speed in RND4K Q1T1 Read is really slow.Can someone please advise what am i doing wrong? HPE M... Posted to: HPE Primera Storage
yesterday Hi,Is there a document that has information on the length of the rack rail kit that comes with the Alletra MP (GL for Block Storage)? I am also looking for information on the length when expantion or contraction. (Parts number: P47762-001)Best regard... Posted to: HPE Nimble Storage Solution Specialists
yesterday We buy Shelf for our Alletra Array 6090, but when we read the Caution about to activate , we dont know it all the service have to shutting down before? Posted to: BladeSystem - General
3 weeks ago smart Array P220i in Embedded slot cache status problem detected: the cache on this controller has a problem. To prevent data loss, configuration changes to this controller are not allowed.PLease replace the cache to be able to continue to configure... Posted to: ProLiant Servers (ML,DL,SL)
yesterday HiI have a DL380 Gen10 ServerEarlier i bought a u.2 backplane (826689-B21) + U.2 NVME enablement kit (873732-B21) and installed 8x3.84 TB U.2 Drivesand restarting the server: they are working well but i can't configure them to work as RAID (The drive... Posted to: Operating System - Microsoft
yesterday During my adventures trying to solve this problem from this forum post, I made a Windows XP Itanium edition CD and tried to boot that (even though I found no material that would indicate that this was a supported OS). Upon executing the EFI file, it ... Posted to: Operating System - Microsoft
Saturday Hello,I've been trying to install Windows Server 2008 R2 on my itanium blade for a couple of days now. Regardless if I attempt to use the smartsetup cd, or if I straight up go to the UEFI shell, switch to the windows cd, go to efi/boot/ an run the ef... Posted to: ProLiant Servers (ML,DL,SL)
Tuesday The client recently had the Smart Array P440ar controller replaced about 2 months ago. The client is complaining of slowness issues. The one yellow flag I'm seeing so far is that there are not status messages in the Smart Storage Administrator. I... Posted to: ProLiant Servers (ML,DL,SL)
yesterday long story short my server booted and ilo had "unknown" beside ipv4 address. i reset it, resetarted it and re set it up and same thing. no activity lights either. i have it on the shared port setting and the other nics work fine. nothings changed so ... Posted to: HPE SimpliVity
01-11-2022 We have an existing and long established SimpliVity Federation that is managed by a single vCenter Server. We are wanting to change that up and wanted to verify if the following things are supported and to determine if one or both can be done with th...
