Posted to: Servers - General
05-22-2023 We have two HPE R/T G5 UPS supplies in a single rack each powered individually on commandos.Recently however, one of the UPS units has started displaying random behaviour where it goes through phases of switching from Utility power to battery, then a... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago Hi all,to restart a server once it freezes, I use a watchdog. I'm not very happy with the HPE iLO2+ HW Watchdog as it often fails to reboot the server and stays frozen with some cryptic iLO message "The server could not be powered on or a server crit... Posted to: ProLiant Servers (ML,DL,SL)
an hour ago Hello everyone,The customer has installed the following card in a Proliant DL385 Gen10"Type: HPE Ethernet 10Gb 2-port 562FLR-SFP+ AdptPart Number: 790317-001".And would now like to install the following transceiver "813874-B21". Is it compatible?Best... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago Hi,I have a HPE PROLIANT DL20 GEN9 E3-1240V5 8GB-U H240 4SFF 290W PS PERFORMANCE SERVER. I have to internal cards installed :- a RAID PCIe card- a SCSI-320 Pci-e card to connect a LTO driveI have no other slot available.Is there a way to add two SFP+... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago Hi,We have a HP DL325 Gen 10 (v1).The disks in the front are 8 x 480GB SSDs which I can see in Smart Storage Controller.We also have a 2SFF connected as seen here HPE ProLiant DL325 Gen10 Server User Guide (Page 119 at the top "Cable routing: 2SFF NV...
Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago I have over 30 DL380/360 Gen 10 servers scattered over the USA and Canada serving as VMWare VSAN hosts. All have 2 socketsI need to disable a CPU in each via Oneview or BIOS because of VMWare licensing changes. I am not talking about disabling core... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago Hello,I am required to support some very old hardware that has not had its firmware upgraded in a long time. Because the iLo firmware so so old I needed to use firefox portable in order to connect to the iLO, HTML5 browsers would give cipher/TLS/secu... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago HI, I bought a ml350 gen11 4lff 4410y in an online store in Switzerland. On the storage controller cabling (https://support.hpe.com/hpesc/public/docDisplay?docId=sd00002366en_us&page=GUID-C8A54573-2980-4788-BF62-8B86FE562413.html), the cable is blue ... Posted to: Server Management - Systems Insight Manager
3 weeks ago I keep getting the following in HP SIM for my DL380 Gen9 servers although FW and BIOS are up to date. Please share any information you may have on this error. See error below.alert : (SNMP) Fan Removed (6039) Posted to: Server Clustering
3 weeks ago I understand that HPE does not support configuring a UPS in a virtualized and HA environment to automatically shutdown each OS in the event of a power failure, regardless of 3Tier/HCI configuration.I would like to use a UPS R1500 G5 to set up a shutd...
