ioscan -fn Class I H/W Path Driver S/W State H/W Type Description ============================================================================= root 0 root CLAIMED BUS_NEXUS ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (880) ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) usb 0 0/0/1/0 hcd CLAIMED INTERFACE NEC USB Interface usbhub 0 0/0/1/0.1 hub CLAIMED DEVICE USB Root Hub usb 1 0/0/1/1 hcd CLAIMED INTERFACE NEC USB Interface usbhub 1 0/0/1/1.1 hub CLAIMED DEVICE USB Root Hub /dev/hub usb 2 0/0/1/2 ehci CLAIMED INTERFACE NEC USB Interface sideba 0 0/0/2/0 side_ba CLAIMED INTERFACE CMD IDE controller ext_bus 0 0/0/2/0.0 side CLAIMED INTERFACE IDE Primary Channel target 0 0/0/2/0.0.0 tgt CLAIMED DEVICE disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-C /dev/dsk/c0t0d0 /dev/rdsk/c0t0d0 target 1 0/0/2/0.0.7 tgt CLAIMED DEVICE ctl 0 0/0/2/0.0.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c0t7d0 ext_bus 1 0/0/2/0.1 side CLAIMED INTERFACE IDE Secondary Channel target 2 0/0/2/0.1.7 tgt CLAIMED DEVICE ctl 1 0/0/2/0.1.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c1t7d0 ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) ext_bus 2 0/1/1/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD target 3 0/1/1/0.0 tgt CLAIMED DEVICE disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 36.4GST336754LC /dev/dsk/c2t0d0 /dev/rdsk/c2t0d0 target 4 0/1/1/0.1 tgt CLAIMED DEVICE disk 2 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 36.4GST336754LC /dev/dsk/c2t1d0 /dev/rdsk/c2t1d0 target 5 0/1/1/0.7 tgt CLAIMED DEVICE ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c2t7d0 ext_bus 3 0/1/1/1 c8xx CLAIMED INTERFACE SCSI C1010 Ultra160 Wide LVD target 6 0/1/1/1.7 tgt CLAIMED DEVICE ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c3t7d0 lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP PCI 1000Base-T Core ba 2 0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) ba 3 0/3 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) ba 4 0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) ba 5 0/4/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge ext_bus 4 0/4/1/0/4/0 ciss CLAIMED INTERFACE PCI-X SmartArray 6404 RAID Controller /dev/ciss4 target 7 0/4/1/0/4/0.0 tgt CLAIMED DEVICE disk 3 0/4/1/0/4/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME /dev/dsk/c4t0d0 /dev/rdsk/c4t0d0 target 8 0/4/1/0/4/0.7 tgt CLAIMED DEVICE ctl 4 0/4/1/0/4/0.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c4t7d0 ext_bus 5 0/4/1/0/5/0 ciss CLAIMED INTERFACE PCI-X SmartArray 6404 RAID Controller /dev/ciss5 target 9 0/4/1/0/5/0.0 tgt CLAIMED DEVICE disk 4 0/4/1/0/5/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME /dev/dsk/c5t0d0 /dev/rdsk/c5t0d0 target 10 0/4/1/0/5/0.7 tgt CLAIMED DEVICE ctl 5 0/4/1/0/5/0.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c5t7d0 ba 6 0/6 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) ba 7 0/7 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783) tty 0 0/7/1/0 asio0 CLAIMED INTERFACE PCI SimpleComm (103c1290) /dev/diag/mux0 /dev/mux0 /dev/tty0p0 tty 1 0/7/1/1 asio0 CLAIMED INTERFACE PCI Serial (103c1048) /dev/GSPdiag1 /dev/diag/mux1 /dev/mux1 /dev/tty1p0 /dev/tty1p2 /dev/tty1p4 unknown -1 0/7/2/0 UNCLAIMED UNKNOWN PCI Display (10025159) memory 0 8 memory CLAIMED MEMORY Memory ipmi 0 16 ipmi CLAIMED INTERFACE IPMI Controller /dev/ipmi processor 0 128 processor CLAIMED PROCESSOR Processor processor 1 129 processor CLAIMED PROCESSOR Processor # sautil /dev/ciss4 ****************************************************************************** **** **** **** S A U T I L S u p p o r t U t i l i t y **** **** **** **** for the HP SmartArray RAID Controller Family **** **** **** **** version A.02.06 **** **** **** **** (C) Copyright 2003, 2004 Hewlett-Packard Development Company, L.P. **** ****************************************************************************** ---- DRIVER INFORMATION ------------------------------------------------------ Driver State........................ READY ---- CONTROLLER INFORMATION -------------------------------------------------- Controller Product Number........... A9891A Controller Product Name............. HP PCI-X SmartArray 6404 (Ch A1, A2) Hardware Path....................... 0/4/1/0/4/0 Serial Number....................... P57820P9SRU0LD Device File......................... /dev/ciss4 Hardware Revision................... 'B' Boot Block Revision................. 3.86 Firmware Revision (running)......... 2.34 Firmware Revision (in ROM).......... 2.34 Firmware Revision (inactive)........ 2.34 # of Logical Drives................. 1 # of Physical Disks Configured...... 10 # of Physical Disks Detected........ 7 Logical Drive Rebuild Priority...... 118 (high) Array Capacity Expansion Priority... 0 (low) Auto-Fail Missing Disks at Boot..... enabled SCSI Transfer Detection Mode........ Auto Detect ---- ARRAY ACCELERATOR (CACHE) INFORMATION ----------------------------------- Array Accelerator Board Present?.... yes Cache Configuration Status.......... write cache temporarily disabled (code=1) Cache Ratio......................... 50% Read / 50% Write Total Cache Size (MB)............... 128 Read Cache........................ 064 Write Cache....................... 064 Transfer Buffer................... 000 Battery Pack Count.................. 2 Battery Status (pack #1)............ FAILED Battery Status (pack #2)............ FAILED ---- LOGICAL DRIVE SUMMARY --------------------------------------------------- # RAID Size Status 0 1+0 173639 MB USING INTERIM RECOVERY MODE ---- SCSI DEVICE SUMMARY ----------------------------------------------------- Location Ch ID Type Capacity Status N/A 1 0 N/A N/A FAILED N/A 1 1 N/A N/A FAILED N/A 1 2 N/A N/A FAILED external 2 0 DISK 36.4 GB OK external 2 1 DISK 36.4 GB OK external 2 2 DISK 36.4 GB OK external 2 3 DISK 36.4 GB OK external 2 4 DISK 36.4 GB OK external 2 5 DISK 36.4 GB OK external 2 8 DISK 36.4 GB OK external 2 15 PROCESSOR ---- SCSI BUS SUMMARY -------------------------------------------------------- External Internal Ch LVD_Mode Connector Connector 1 YES - - 2 YES YES - ---- LOGICAL DRIVE 0 --------------------------------------------------------- Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring) Logical Drive Size.................. 173639 MB Logical Drive Status................ USING INTERIM RECOVERY MODE # of Participating Physical Disks... 10 Participating Physical Disk(s)...... Ch:ID 1: 0 <-- NOT RESPONDING 1: 1 <-- NOT RESPONDING 1: 2 <-- NOT RESPONDING 2: 0 2: 1 2: 2 2: 3 2: 4 2: 5 2: 8 Participating Spare Disk(s)......... Ch:ID none Stripe Size......................... 16 KB Logical Drive Cache Status.......... write cache temporarily disabled (code=1) Configuration Signature............. 0x0 Media Exchange Detected?............ no ---- SCSI DEVICE 2:0 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 0 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03687B54 Device Serial Number............................. E20ELR2K Device Firmware Version.......................... HPB2 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:1 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 1 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03687B54 Device Serial Number............................. E20CZB3K Device Firmware Version.......................... HPB2 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:2 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 2 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03689BC3 Device Serial Number............................. DSL1P7902L830738 Device Firmware Version.......................... HPB1 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. REMOVED IN HOT PLUG Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:3 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 3 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03687B54 Device Serial Number............................. E20D1CRK Device Firmware Version.......................... HPB2 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:4 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 4 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03687B54 Device Serial Number............................. E20BWRXK Device Firmware Version.......................... HPB2 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:5 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 5 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03687B54 Device Serial Number............................. E20C8CEK Device Firmware Version.......................... HPB2 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:8 [DISK] -------------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 8 Device Type...................................... DISK Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. COMPAQ Device Product ID................................ BF03687B54 Device Serial Number............................. E20CYLRK Device Firmware Version.......................... HPB2 SCSI Transfer Rate (actual)...................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. REMOVED IN HOT PLUG Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... yes Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 2:15 [PROCESSOR] -------------------------------------------- Connector Location............................... external Channel Number................................... 2 SCSI ID.......................................... 15 Device Type...................................... PROCESSOR Device Vendor ID................................. COMPAQ Device Product ID................................ PROLIANT 4L7E*DB SCSI Transfer Rate (maximum)..................... Ultra-320 ---- DIAGRAM OF EXTERNAL CONNECTORS ON BRACKET ------------------------------- ========---======== | | | U320 <--- LOOK FOR THIS LOGO | / \ | | <- | | \ / | | | | * * | | * * * * | (Ch A1)---> * * * * <--- (Ch A2) | * * * * | | * * | | | | * * | | * * * * | | * * * * | | * * * * | | * * | | | | | ~ ~ ~ ~ ~ ****************************************************************************** **** End of SAUTIL Output **** ****************************************************************************** # saconfig /dev/ciss4 ******************** SmartArray RAID Controller /dev/ciss4 ******************** Auto-Fail Missing Disks at Boot = enabled Cache Configuration Status = write cache temporarily disabled (code=1) Cache Ratio = 50% Read / 50% Write ---------- PHYSICAL DRIVES ---------- Location Ch ID Size Status External 2 0 36.4 GB OK External 2 1 36.4 GB OK External 2 2 36.4 GB OK External 2 3 36.4 GB OK External 2 4 36.4 GB OK External 2 5 36.4 GB OK External 2 8 36.4 GB OK ---------- LOGICAL DRIVE 0 ---------- RAID Level = 1+0 Size = 173639 MB Stripe Size = 16 KB Status = USING INTERIM RECOVERY MODE Participating Physical Drive(s): Ch ID 1 0 1 1 1 2 2 0 2 1 2 2 2 3 2 4 2 5 2 8 Participating Spare Drive(s): None # sautil /dev/ciss5 ****************************************************************************** **** **** **** S A U T I L S u p p o r t U t i l i t y **** **** **** **** for the HP SmartArray RAID Controller Family **** **** **** **** version A.02.06 **** **** **** **** (C) Copyright 2003, 2004 Hewlett-Packard Development Company, L.P. **** ****************************************************************************** ---- DRIVER INFORMATION ------------------------------------------------------ Driver State........................ READY ---- CONTROLLER INFORMATION -------------------------------------------------- Controller Product Number........... A9891A Controller Product Name............. HP PCI-X SmartArray 6404 (Ch B1, B2) Hardware Path....................... 0/4/1/0/5/0 Serial Number....................... P577C0M9SRT05Q Device File......................... /dev/ciss5 Hardware Revision................... 'B' Boot Block Revision................. 3.86 Firmware Revision (running)......... 2.34 Firmware Revision (in ROM).......... 2.34 Firmware Revision (inactive)........ 2.34 # of Logical Drives................. 1 # of Physical Disks Configured...... 10 # of Physical Disks Detected........ 0 Logical Drive Rebuild Priority...... 118 (high) Array Capacity Expansion Priority... 0 (low) Auto-Fail Missing Disks at Boot..... enabled SCSI Transfer Detection Mode........ Auto Detect ---- ARRAY ACCELERATOR (CACHE) INFORMATION ----------------------------------- Array Accelerator Board Present?.... yes Cache Configuration Status.......... write cache temporarily disabled (code=1) Cache Ratio......................... 50% Read / 50% Write Total Cache Size (MB)............... 128 Read Cache........................ 064 Write Cache....................... 064 Transfer Buffer................... 000 Battery Pack Count.................. 2 Battery Status (pack #1)............ FAILED Battery Status (pack #2)............ FAILED ---- LOGICAL DRIVE SUMMARY --------------------------------------------------- # RAID Size Status 0 1+0 173639 MB FAILED ---- SCSI DEVICE SUMMARY ----------------------------------------------------- Location Ch ID Type Capacity Status internal 1 0 N/A 36.4 GB OK internal 1 1 N/A 36.4 GB OK internal 1 2 N/A 36.4 GB OK internal 1 3 N/A 36.4 GB UNASSIGNED internal 1 4 N/A 36.4 GB UNASSIGNED N/A 1 7 N/A N/A N/A N/A 2 0 N/A N/A FAILED N/A 2 1 N/A N/A FAILED N/A 2 2 N/A N/A FAILED N/A 2 3 N/A N/A FAILED N/A 2 4 N/A N/A FAILED N/A 2 5 N/A N/A FAILED N/A 2 8 N/A N/A FAILED ---- SCSI BUS SUMMARY -------------------------------------------------------- External Internal Ch LVD_Mode Connector Connector 1 YES - - 2 YES - - ---- LOGICAL DRIVE 0 --------------------------------------------------------- Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring) Logical Drive Size.................. 173639 MB Logical Drive Status................ FAILED # of Participating Physical Disks... 10 Participating Physical Disk(s)...... Ch:ID 1: 0 1: 1 1: 2 2: 0 <-- NOT RESPONDING 2: 1 <-- NOT RESPONDING 2: 2 <-- NOT RESPONDING 2: 3 <-- NOT RESPONDING 2: 4 <-- NOT RESPONDING 2: 5 <-- NOT RESPONDING 2: 8 <-- NOT RESPONDING Participating Spare Disk(s)......... Ch:ID none Stripe Size......................... 16 KB Logical Drive Cache Status.......... write cache temporarily disabled (code=1) Configuration Signature............. 0x0 Media Exchange Detected?............ no ---- SCSI DEVICE 1:0 [UNKNOWN] ----------------------------------------------- Connector Location............................... internal Channel Number................................... 1 SCSI ID.......................................... 0 Device Type...................................... N/A Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. N/A Device Product ID................................ N/A Device Serial Number............................. E20BWWNK Device Firmware Version.......................... HPB2 SCSI Transfer Rate............................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. BUS RESET RECOVERY ABORTED S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes sautil (/dev/ciss5): Error - FW command bad status (IDENTIFY_PHYSICAL_ Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 1:1 [UNKNOWN] ----------------------------------------------- Connector Location............................... internal Channel Number................................... 1 SCSI ID.......................................... 1 Device Type...................................... N/A Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. N/A Device Product ID................................ N/A Device Serial Number............................. E20CMXWK Device Firmware Version.......................... HPB2 SCSI Transfer Rate............................... Ultra-320 DRIVE) sautil (/dev/ciss5): Command completed, but error has occurred, cmd_status=1 sautil (/dev/ciss5): Error - FW command bad status (INQUIRY) Standard inputalid data, cmd_status=4 sautil (/dev/ciss5): Current driver state is READY Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. BUS RESET RECOVERY ABORTED Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 1:2 [UNKNOWN] ----------------------------------------------- Connector Location............................... internal Channel Number................................... 1 SCSI ID.......................................... 2 Device Type...................................... N/A Disk Capacity.................................... 36.4 GB Device Status.................................... OK Device Vendor ID................................. N/A Device Product ID................................ N/A Device Serial Number............................. K2077RTK Device Firmware Version.......................... HPB9 SCSI Transfer Rate............................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. BUS RESET RECOVERY ABORTED Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 1:3 [UNKNOWN] ----------------------------------------------- Connector Location............................... internal Channel Number................................... 1 SCSI ID.......................................... 3 Device Type...................................... N/A Disk Capacity.................................... 36.4 GB Device Status.................................... UNASSIGNED Device Vendor ID................................. N/A Device Product ID................................ N/A Device Serial Number............................. 3HX0J5MM000073393RGD Device Firmware Version.......................... HPB8 SCSI Transfer Rate............................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ no Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... no Configured in a logical drive.................. no Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 1:4 [UNKNOWN] ----------------------------------------------- Connector Location............................... internal Channel Number................................... 1 SCSI ID.......................................... 4 Device Type...................................... N/A Disk Capacity.................................... 36.4 GB Device Status.................................... UNASSIGNED Device Vendor ID................................. N/A Device Product ID................................ N/A Device Serial Number............................. 3HX0CMZZ00007334V97B Device Firmware Version.......................... HPB3 SCSI Transfer Rate............................... Ultra-320 Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ no Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no Wide SCSI transfer enabled..................... yes Synchronous (Fast/Ultra) transfer enabled...... yes Narrow disk tray detected...................... no Wide transfer failed, reverted to narrow....... no Ultra SCSI transfer enabled.................... yes Ultra-2 SCSI transfer enabled.................. yes S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external channel................... no Configured in a logical drive.................. no Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Running in DT clocking mode.................... yes Supports DT clocking mode only................. no Supports DT and ST clocking modes.............. yes Running in U320 mode........................... yes Packetized SCSI supported...................... yes Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes QAS capable (U320 only)........................ yes Currently running QAS (U320 only).............. yes ---- SCSI DEVICE 1:7 [UNKNOWN] ----------------------------------------------- Connector Location............................... N/A Channel Number................................... 1 SCSI ID.......................................... 7 Device Type...................................... N/A Disk Capacity.................................... N/A Device Status.................................... N/A Device Vendor ID................................. N/A Device Product ID................................ N/A Device Serial Number............................. N/A Device Firmware Version.......................... N/A SCSI Transfer Rate............................... N/A Reserved Area (cfg/status info).................. N/A Block Size (bytes/sector)........................ N/A M&P Data Stamped?................................ N/A Last Failure Reason.............................. N/A Physical Disk Flags.............................. N/A ---- DIAGRAM OF EXTERNAL CONNECTORS ON BRACKET ------------------------------- ---- DIAGRAM OF EXTERNAL CONNECTORS ON BRACKET ------------------------------- ========---======== | | | U320 <--- LOOK FOR THIS LOGO | / \ | | <- | | \ / | | | | * * | | * * * * | | * * * * | | * * * * | | * * | | | | * * | | * * * * | (Ch B1)---> * * * * <--- (Ch B2) | * * * * | | * * | | | | | ~ ~ ~ ~ ~ ****************************************************************************** **** End of SAUTIL Output **** ****************************************************************************** # saconfig /dev/ciss5 ******************** SmartArray RAID Controller /dev/ciss5 ******************** Auto-Fail Missing Disks at Boot = enabled Cache Configuration Status = write cache temporarily disabled (code=1) Cache Ratio = 50% Read / 50% Write ---------- PHYSICAL DRIVES ---------- No physical drive detected ---------- LOGICAL DRIVE 0 ---------- RAID Level = 1+0 Size = 173639 MB Stripe Size = 16 KB Status = FAILED Participating Physical Drive(s): Ch ID 1 0 1 1 1 2 2 0 2 1 2 2 2 3 2 4 2 5 2 8 Participating Spare Drive(s): None