Welcome to dr_dt. I will examine your system to determine if HP CDE can function properly. If I find problems or concerns, or just want to supply some information, I will issue INFO/WARNING/ERROR statements. I will not make any changes myself, but might suggest that you change something. If you are not sure if a particular change should be made, check with your system administrator. Here's to your health! INFO: A uname produces the following information: HP-UX imisbr4 B.11.31 U 9000/800 2438311590 unlimited-user license INFO: Checking some networking on your system... INFO: Your system currently has the following lan hardware installed, as reported by the '/etc/lanscan' command: Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI Path Address In# State NamePPA ID Type Support Mjr# 0/1/2/0 0x001CC4399F73 0 UP lan0 snap0 1 ETHER Yes 119 LinkAgg0 0x000000000000 900 DOWN lan900 snap900 3 ETHER Yes 119 LinkAgg1 0x000000000000 901 DOWN lan901 snap901 4 ETHER Yes 119 LinkAgg2 0x000000000000 902 DOWN lan902 snap902 5 ETHER Yes 119 LinkAgg3 0x000000000000 903 DOWN lan903 snap903 6 ETHER Yes 119 LinkAgg4 0x000000000000 904 DOWN lan904 snap904 7 ETHER Yes 119 INFO: The following is the current configuration information for each of your lan cards, as reported by the '/etc/ifconfig' command: lan0: flags=1843 inet 157.150.152.4 netmask fffff800 broadcast 157.150.159.255 INFO: /etc/resolv.conf contains the following information. Use '/etc/ping' to verify that each of the configured name servers can be accessed: domain escwa.un.org nameserver 157.150.152.1 WARNING: The permissions on /etc/hosts do not match the correct permissions for the file. If you are running NameServer (/etc/named) the /etc/hosts file is just used as a backup, but if the NameServer fails, incorrect permissions on /etc/hosts can be a problem. The file should be owner = bin, group = bin, and have permissions of " -r--r--r--". INFO: Checking inetd configuration... INFO: Checking / validity WARNING: The / directory is not properly configured. The current configuration is: permissions = drwxr-xr-x owner = root group = root For HP CDE to function correctly, it should be a directory with the following configuration: permissions = dr-xr-xr-x owner = root group = sys Although the permissions of your home directory may be different from the above, please check that you are able to write to your own directory. INFO: Checking //.dtprofile for terminal I/O statements... INFO: Checking //.dt existence... INFO: Validating setting of $DISPLAY environment variable... INFO: HP CDE sets the DISPLAY environment variable to :0 (imisbr4:0 in your case). Yours is currently set to "10.30.2.8:0.0", which is a potential problem, unless you are on an X terminal, querying another server, or remotely logged into this system. Users typically set the DISPLAY variable in .dtprofile, .profile, .login, .kshrc or .cshrc (depending on the shell). Unless you really need to, make sure you are not setting it. INFO: Checking CDE/Vue startup for possible conflicts... INFO: Checking existence/permissions of certain system directories... WARNING: The /tmp directory is not properly configured. The current configuration is: permissions = drwxrwxrwt owner = root group = root For HP CDE to function correctly, it should be a directory with the following configuration: permissions = drwxrwxrwx owner = bin group = bin WARNING: The /usr/spool/sockets directory is not properly configured. The current configuration is: permissions = drwxrwxrwt owner = bin group = bin For HP CDE to function correctly, it should be a directory with the following configuration: permissions = drwxrwxrwx owner = bin group = bin INFO: Checking existence/permissions of certain CDE directories... WARNING: The /usr/dt/backdrops directory is not properly configured. The current configuration is: permissions = lr--r--r-- owner = bin group = bin link = /usr/dt/share/backdrops For HP CDE to function correctly, it should be a symbolic link to a directory, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /usr/dt/share/backdrops INFO: Checking existence/permissions of CDE executable files... WARNING: The /usr/dt/bin/dtprintinfo file is not properly configured. The current configuration is: permissions = -r-xr-xr-x owner = root group = bin For HP CDE to function correctly, it should be a file with the following configuration: permissions = -r-sr-xr-x owner = root group = bin WARNING: The /usr/dt/bin/dtsession file is not properly configured. The current configuration is: permissions = -r-xr-xr-x owner = root group = bin For HP CDE to function correctly, it should be a file with the following configuration: permissions = -r-sr-xr-x owner = root group = bin WARNING: The /usr/dt/bin/dtterm file is not properly configured. The current configuration is: permissions = -r-xr-xr-x owner = root group = bin For HP CDE to function correctly, it should be a file with the following configuration: permissions = -r-sr-xr-x owner = root group = bin WARNING: The /usr/dt/bin/dtaction file is not properly configured. The current configuration is: permissions = -r-xr-xr-x owner = root group = sys For HP CDE to function correctly, it should be a file with the following configuration: permissions = -r-sr-sr-x owner = root group = sys WARNING: The /usr/dt/bin/ttrmdir file is not properly configured. The current configuration is: permissions = lr--r--r-- owner = bin group = bin link = /usr/dt/bin/ttrm For HP CDE to function correctly, it should be a symbolic link to a file, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /usr/dt/bin/ttrm WARNING: The /usr/dt/bin/ttsnoop file is not properly configured. The current configuration is: permissions = lr--r--r-- owner = bin group = bin link = /usr/contrib/bin/ttsnoop For HP CDE to function correctly, it should be a symbolic link to a file, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /usr/contrib/bin/ttsnoop WARNING: The /usr/dt/bin/tttrace file is not properly configured. The current configuration is: permissions = lr--r--r-- owner = bin group = bin link = /usr/contrib/bin/tttrace For HP CDE to function correctly, it should be a symbolic link to a file, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /usr/contrib/bin/tttrace INFO: Checking existence/permissions of CDE script files... WARNING: The /sbin/rc2.d/K100dtlogin.rc file is not properly configured. The current configuration is: permissions = lr-xr--r-- owner = bin group = bin link = /sbin/init.d/dtlogin.rc For HP CDE to function correctly, it should be a symbolic link to a file, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /sbin/init.d/dtlogin.rc WARNING: The /sbin/rc3.d/S990dtlogin.rc file is not properly configured. The current configuration is: permissions = lr-xr--r-- owner = bin group = bin link = /sbin/init.d/dtlogin.rc For HP CDE to function correctly, it should be a symbolic link to a file, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /sbin/init.d/dtlogin.rc INFO: Checking existence/permissions of CDE configuration files... WARNING: The /usr/dt/app-defaults/C/Ttsnoop file is not properly configured. The current configuration is: permissions = lr--r--r-- owner = bin group = bin link = /usr/contrib/lib/X11/app-defaults/Ttsnoop For HP CDE to function correctly, it should be a symbolic link to a file, with the following configuration: permissions = lrwxr-xr-x owner = root group = sys link = /usr/contrib/lib/X11/app-defaults/Ttsnoop INFO: Listing some CDE configuration resources.... INFO: Listing uncommented lines in /usr/dt/config/Xconfig Dtlogin.errorLogFile: /var/dt/Xerrors Dtlogin.pidFile: /var/dt/Xpid Dtlogin.accessFile: Xaccess Dtlogin.servers: Xservers Dtlogin*resources: %L/Xresources Dtlogin*startup: Xstartup Dtlogin*reset: Xreset Dtlogin*setup: Xsetup Dtlogin*failsafeClient: Xfailsafe Dtlogin*langSetup: /usr/dt/config/Xlangsetup INFO: Listing uncommented lines in /usr/dt/config/Xservers * Local local@console /usr/bin/X11/X :0 INFO: Listing uncommented lines in /usr/dt/config/Xaccess * # grant service to all remote displays * CHOOSER BROADCAST # any indirect host can get a chooser INFO: Checking existence/permissions of CDE locale-specific configuration and app-defaults files... WARNING: The /usr/dt/app-defaults/en_US.iso88591/UNIXbindings file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtksh file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dthello file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtsession file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtwm file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtfile file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtstyle file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtpad file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtscreen file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dticon file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtcalc file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtterm file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dt file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtcreate file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtcm file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtprintinfo file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dtmail file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dthelpview file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/app-defaults/en_US.iso88591/Dthelpprint file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/config/en_US.iso88591/Xresources file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/config/en_US.iso88591/sys.dtwmrc file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/config/en_US.iso88591/sys.resources file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/config/en_US.iso88591/sys.session file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/config/en_US.iso88591/sys.font file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. WARNING: The /usr/dt/config/en_US.iso88591/dtfile.config file does not exist. This file is used when running in the 'en_US.iso88591' locale, which you are currently configured for. Without this file, CDE will use the default 'C' version of this file. There may have been a problem at installation. You can either reinstall HP CDE or get a copy of the file from another compatible system. INFO: Checking existence/permissions of Motif binding files... INFO: Running swverify to verify your software installation and list what patches are installed your system. Note that this may take a considerable amount of time, depending on your processor. Please be patient. Also note that swverify leaves complete logs of its work in the files: /usr/adm/sw/swverify.log /usr/adm/sw/swagent.log You may wish to review these if there are any WARNINGS or ERRORS found during the software verification. INFO: Verifying CDE-English... INFO: Generating list of patches installed on the system... PHCO_36003 1.0 logins(1M) cumulative patch PHCO_36032 1.0 killall(1M) cumulative patch PHCO_36038 1.0 esmd(1M) cumulative patch PHCO_36075 1.0 documentation change needed for stat(5) PHCO_36126 1.0 Event Management (EVM) template file cumulative patch PHCO_36254 1.0 uptime(1) cumulative patch PHCO_36309 1.0 diskinfo(1M) patch PHCO_36392 1.0 Japanese documentation change needed for stat(5) PHCO_36447 1.0 aries(5) man page patch PHCO_36479 1.0 rbac cumulative patch PHCO_36480 1.0 userdb cumulative patch PHCO_36481 1.0 passwd(1) cumulative patch PHCO_36505 1.0 localedef(1M) cumulative patch PHCO_36525 1.0 auto_parms/set_parms/dhcpdb2conf cumulative patch PHCO_36539 1.0 cron(1M) cumulative patch PHCO_36555 1.0 idisk(1M) cumulative patch PHCO_36569 1.0 Firmware/software compatibility check PHCO_36743 1.0 libpam_hpsec cumulative patch PHCO_36760 1.0 libpam_unix cumulative patch PHCO_36769 1.0 linker/compiler English manpages PHCO_36798 1.0 pax(1) patch PHCO_36840 1.0 swapctl.2 manpage PHCO_36889 1.0 /sbin/passwd cumulative patch PHCO_36944 1.0 fold(1) cumulative patch PHCO_36945 1.0 more(1) cumulative patch PHCO_37128 1.0 libc manpage cumulative patch PHCO_37221 1.0 setboot(1M) cumulative patch PHCO_37250 1.0 English math manpages patch PHCO_37252 1.0 csh(1) cumulative patch PHCO_37267 1.0 fwtmp(1m) cumulative patch PHCO_37286 1.0 sh-posix(1) cumulative patch PHCO_37328 1.0 mkboot(1M) patch for LVM and HPVM PHCO_37394 1.0 VxFS mkfs(1M) cumulative patch PHCO_37478 1.0 intctl(1M) and intrbald(1M) patch PHCO_37482 1.0 ioinitrc cumulative patch PHCO_37484 1.0 mksf(1M) cumulative patch PHCO_37485 1.0 sfd patch PHCO_37550 1.0 audcmnds cumulative patch PHCO_37555 1.0 olrad(1M) cumulative patch PHCO_37556 1.0 rtsched cumulative patch PHCO_37562 1.0 Mass Storage CRA patch PHCO_37696 1.0 pwck(1M) cumulative patch PHCO_37697 1.0 tsconvert cumulative patch PHCO_37699 1.0 security manpages cumulative patch PHCO_37722 1.0 tztab(4) cumulative patch PHCO_37781 1.0 libsec cumulative patch PHCO_37862 1.0 European TrueType Fonts Patch PHCO_37913 1.0 HFS mkfs(1M) cumulative patch PHCO_37914 1.0 edquota(1M) cumulative patch PHCO_37915 1.0 quota(1) cumulative patch PHCO_37921 1.0 iconv cumulative patch PHCO_37922 1.0 Arabic, Hebrew and Thai PostScript printing patch PHCO_37986 1.0 frecover(1M) Cumulative patch PHCO_38026 1.0 libsys cumulative patch PHCO_38044 1.0 libc cumulative header file patch PHCO_38048 1.0 libc cumulative patch PHCO_38049 1.0 getconf cumulative patch PHCO_38050 1.0 pthread library cumulative patch PHCO_38058 1.0 mpsched(1) cumulative patch PHCO_38061 1.0 ioscan(1M) cumulative patch PHCO_38062 1.0 ioinit(1M) cumulative patch PHCO_38064 1.0 scsimgr cumulative patch PHCO_38066 1.0 libIO(3X) cumulative patch PHCO_38160 1.0 id(1) cumulative patch PHCO_38161 1.0 groups(1) cumulative patch PHCO_38162 1.0 ksh(1) cumulative patch PHCO_38164 1.0 getaccess(1) cumulative patch PHCO_38189 1.0 livedump man page patch PHCO_38190 1.0 crashconf(1M) cumulative patch PHCO_38237 1.0 su cumulative patch PHCO_38242 1.0 ps(1) cumulative patch PHCO_38248 1.0 chgrp cumulative patch PHCO_38249 1.0 chown cumulative patch PHCO_38250 1.0 ugm cumulative patch PHCO_38255 1.0 mkfs_hfs(1M) man page patch PHCO_38256 1.0 edquota(1M) man page patch PHCO_38257 1.0 quota(1) man page patch PHCO_38269 1.0 acctcom(1m) cumulative patch PHKL_36019 1.0 hcd USB kernel driver cumulative patch PHKL_36049 1.0 Dynamic NPartitions, PAT PSM cumulative PHKL_36072 1.0 ehci USB kernel driver cumulative patch PHKL_36142 1.0 Cell Online Addition and Deletion (OL*) patch PHKL_36255 1.0 Filesystem pstat module patch PHKL_36261 1.0 Integrity Virtual Machine Capabilities Interface PHKL_36284 1.0 Integrity Processor Migration Performance PHKL_36322 1.0 SCSI cumulative I/O patch PHKL_36372 1.0 PCI OLA/R/D subsystem patch PHKL_36443 1.0 PCI Error Recovery,Dynamic NPartitions PHKL_36450 1.0 Gvid graphics driver I/O Port patch PHKL_36458 1.0 kevm preemption fix PHKL_36534 1.0 Man page for mca_recovery_on tunable PHKL_36620 1.0 Stack trace support for DLKM modules PHKL_36768 1.0 Cumulative IPMI defect patch PHKL_36778 1.0 TBI interrupt migration performance fix PHKL_36779 1.0 MSI/MSI-X interrupt migration performance fix PHKL_36790 1.0 Fibre Channel Mass Storage Patch PHKL_36797 1.0 VxFS4.1 kernel module patch PHKL_37247 1.0 IDE/ATAPI cumulative patch PHKL_37296 1.0 vfs module patch PHKL_37325 1.0 Non-blocking FW calls PHKL_37329 1.0 PCI to PCI bridge support for PCIe hotplug, PCIe ER PHKL_37457 1.0 thread level signal enhancements patch PHKL_37462 1.0 diagnostic memory driver cumulative patch PHKL_37464 1.0 pm_usync cumulative patch PHKL_37465 1.0 thread level enhancements patch PHKL_37468 1.0 KI and ktracer cumulative patch PHKL_37473 1.0 timer cumulative patch PHKL_37511 1.0 English fcntl(2) manpage patch PHKL_37554 1.0 OLA/R/D subsystem patch PHKL_37849 1.0 DynsysVsem man page patch PHKL_37874 1.0 Cumulative diag2 driver defect fixes PHKL_37987 1.0 fs_spec module patch PHKL_37988 1.0 fs_filedscrp kernel module patch PHKL_37989 1.0 fcntl header file patch PHKL_38023 1.0 audit cumulative patch PHKL_38024 1.0 process management cumulative patch PHKL_38025 1.0 system call infrastructure cumulative patch PHKL_38035 1.0 svc cumulative patch PHKL_38038 1.0 vm cumulative patch PHKL_38039 1.0 GIO cumulative patch PHKL_38040 1.0 Kernel debugger cumulative patch PHKL_38042 1.0 unistd_h cumulative patch PHKL_38052 1.0 WSIO subsystem cumulative patch PHKL_38053 1.0 esdisk cumulative patch PHKL_38054 1.0 esctl cumulative patch PHKL_38055 1.0 scheduler cumulative patch PHKL_38057 1.0 dev_config cumulative patch PHKL_38077 1.0 pstat cumulative patch PHKL_38079 1.0 PRM/FSS cumulative patch with LVM enhancement PHKL_38080 1.0 vPars PSM component for vPars A.05.04 release PHKL_38082 1.0 diskaudit cumulative patch PHKL_38085 1.0 fabric cumulative patch PHKL_38089 1.0 intr_disp cumulative patch PHKL_38090 1.0 pci cumulative patch PHKL_38091 1.0 cdfs cumulative patch PHKL_38093 1.0 wsio.h header file patch PHKL_38094 1.0 shutdown cumulative patch PHKL_38095 1.0 ngroups_max(5) cumulative patch PHKL_38103 1.0 boot loader cumulative patch PHKL_38109 1.0 cumulative gvid patch PHKL_38114 1.0 ttrace(2) cumulative patch PHKL_38191 1.0 sysconf(2) cumulative patch PHKL_38192 1.0 vfs_scalls cumulative patch PHKL_38193 1.0 credentials cumulative patch PHKL_38194 1.0 callouts cumulative patch PHKL_38195 1.0 scheduler power management cumulative patch PHKL_38207 1.0 dump_tune manpages patch PHKL_38251 1.0 io cumulative patch PHKL_38289 1.0 kconfig cumulative patch PHKL_38305 1.0 asyncdsk cumulative patch PHKL_38398 1.0 sba cumulative patch PHKL_38414 1.0 dump cumulative patch PHNE_35894 1.0 Networking commands cumulative patch PHNE_36281 1.0 cumulative ARPA Transport patch PHNE_36373 1.0 100BT unified driver cumulative patch PHNE_36462 1.0 Cumulative Console and BSD Pty Patch PHNE_37257 1.0 STREAMS Cumulative Patch PHNE_37799 1.0 LAN cumulative patch PHNE_38153 1.0 inetd(1M) cumulative patch PHSS_36361 1.0 KRB5-Client Version 1.3.5.03 Cumulative patch PHSS_36604 1.0 X11 Font Library Patch PHSS_37004 1.0 HP DCE 2.0 client cumulative patch PHSS_37226 1.0 X Font Server Patch PHSS_37501 1.0 aC++ Runtime (IA: A.06.16, PA: A.03.76) PHSS_37519 1.0 WDB and PXDB Patch PHSS_37871 1.0 3.2.1 cumulative patch PHSS_37955 1.0 linker + fdp cumulative patch PHSS_38840 1.0 Xserver cumulative patch INFO: Checking permissions of the /dev/null device... Dr_dt finished with: 0 ERROR messages 40 WARNING messages