_______________________________________________________________________________ Congratulations! Your system is now configured for networking, with system name hpux, and IP address 172.16.2.32! You may later want to set up (or finish setting up) additional network parameters for routing (gateways), DNS, and/or NIS. If so, please run the following command (you may want to note this for later reference): /sbin/set_parms addl_netwrk [Enter] To fully utilize the capabilities of your system, you may have to perform some additional system configuration tasks using the HP-UX "sam" (System Administration Manager) command. Consult your local administrator or the "Managing Systems and Workgroups" manual for more information. Press Q/q to quit, Enter to continue: The system will now complete its boot process, and allow you to login as 'root'. _______________________________________________________________________________ Press [Enter] to continue... HP-UX Start-up in progress __________________________ Configure system crash dumps ........................................ OK VxVM INFO V-5-2-3360 VxVM device node check ......................... OK VxVM INFO V-5-2-3362 VxVM general startup ........................... OK VxVM INFO V-5-2-3366 VxVM reconfiguration recovery .................. OK Mount file systems .................................................. OK Swapping in new libpthread .......................................... OK Setting hostname .................................................... OK Start Kernel Logging facility ....................................... OK Set privilege group ................................................. N/A Display date ........................................................ N/A Press Q/q to quit, Enter to continue: Copy processor logs to /var/tombstones .............................. OK Save system crash dump if needed .................................... N/A Start evp ........................................................... OK Enable auxiliary swap space ......................................... OK Start syncer daemon ................................................. OK Start Utmp Daemon : manages User Accounting Database ................ OK Configure Loopback interfaces (lo0) ................................. OK VxVM INFO V-5-2-3370 VxVM volume recovery start ..................... OK Configuring all unconfigured software filesets ...................... OK Configuring PFIL .................................................... OK Starting IPFilter ................................................... OK Configuring Install Time Security ................................... N/A Recover editor crash files .......................................... OK Clean UUCP .......................................................... OK List and/or clear temporary files ................................... OK Clean up old log files .............................................. OK Start system message logging daemon ................................. OK Start pty allocator daemon .......................................... OK Configuring OLA/R interface ......................................... N/A Start network tracing and logging daemon ............................ OK Press Q/q to quit, Enter to continue: Configure HP igelan Gigabit Ethernet interfaces ..................... OK Configure HP iether 100BT/Gigabit Ethernet interfaces ............... OK Configure HP gelan Gigabit Ethernet interfaces ...................... OK Create PCI FDDI device files. ....................................... OK Configure HP 100BASE-T interfaces ................................... OK Configure VLAN interfaces ........................................... OK Configure LAN interfaces ............................................ OK Configure LAN interfaces for IPv6 ................................... OK Starting DHCPv6 Server daemon ....................................... N/A Configuring DHCPv6 Interfaces ....................................... OK Start name server daemon ............................................ N/A Starting HP-UX Secure Shell ......................................... OK Start NFS core subsystem ............................................ OK Start NIS+ server subsystem ......................................... OK Start NIS+ client subsystem ......................................... OK Start NIS server subsystem .......................................... OK Start ldap client daemon ............................................ N/A Start NIS/LDAP server subsystem ..................................... N/A Start NIS client subsystem .......................................... OK Start NFS client subsystem .......................................... OK Press Q/q to quit, Enter to continue: Start the Trusted Mode with NIS+ subsystem .......................... N/A Start multicast routing daemon ...................................... N/A Start Internet services daemon ...................................... OK Start dynamic routing daemon ........................................ N/A Start router discover protocol daemon ............................... N/A Configuring PPP Interface ........................................... OK Configuring PPPoE ................................................... N/A Start RARP protocol daemon .......................................... N/A Start remote system status daemon ................................... N/A Start IPv6 router advertisement daemon .............................. N/A Starting mail daemon ................................................ OK Starting cfengine's cfservd daemon .................................. N/A Starting syslog-ng daemons .......................................... N/A Starting outbound connection daemons for DDFA software .............. N/A Starting sfmdb PostgreSQL daemons ................................... OK Start SNMP Master Network Management daemon ......................... OK Start OSPF MIB Network Management subAgent .......................... N/A Start SNMP HP-UNIX Network Management subAgent ...................... OK Start SNMP IPv6 Network Management subAgent ......................... OK Start SNMP MIB-2 Network Management subAgent ........................ OK Press Q/q to quit, Enter to continue: Start Native Adapter Agent .......................................... OK Start SNMP Trap Dest Network Management subAgent .................... OK Start DCE daemons ................................................... N/A Start SNMP PCI FDDI Network Management subAgent ..................... OK Start RPC daemon if needed .......................................... OK Start CIM cimserver subsystem ....................................... OK Initialize Instant Capacity ......................................... N/A Starting ISEE hpservices mad daemon. ................................ N/A Start Runner ........................................................ N/A Starting X Font Server at TCP port 7000 ............................. N/A Start vt daemon ..................................................... N/A Start time synchronization .......................................... N/A Start accounting .................................................... N/A Install/Load XF86 DLKM Helper Modules ............................... N/A Starting the password/group assist subsystem ........................ OK Starting HP Disk Array Manager daemons. ............................. OK Start print spooler ................................................. N/A Start clock daemon .................................................. OK Run Security Patch Check Utility .................................... N/A Start diagnostic subsystem .......................................... OK Press Q/q to quit, Enter to continue: Start environment monitoring daemon ................................. OK Start auditing subsystem ............................................ N/A Start audio server daemon ........................................... N/A Start Distributed Single Logical Screen daemon ...................... N/A Start USB hub daemon ................................................ OK SAM System administration configuration ............................. OK Initialize Software Distributor agent daemon ........................ OK Starting the System Management HomePage server ...................... OK Starting the gWLM Agent ............................................. N/A Starting CIFS Client ................................................ N/A Configure HP RAID SA interfaces ..................................... N/A Copy processor logs to /var/tombstones .............................. OK Starting Event Monitoring Service ................................... OK Start EMS SNMP subagent ............................................. OK Configure HP Fibre Channel Mass Storage interfaces .................. OK Configuring Ultra320 SCSI Mass Storage interfaces ................... N/A Starting the Winbind Daemon ......................................... N/A Starting the RST EMS listener ....................................... N/A Configure HP Fibre Channel Tachyon TL/TS Mass Storage interfaces .... OK Configuring HP Fibre Channel FCD Mass Storage interfaces ............ OK Press Q/q to quit, Enter to continue: VxVM VVR INFO V-5-2-3502 Starting Communication Daemon .............. N/A VxVM VVR INFO V-5-4-2409 Starting VRAS daemon ....................... N/A VxVM VVR INFO V-5-4-2409 Starting VxRSync daemon .................... N/A Starting VERITAS Enterprise Administrator Service (vxsvc) ........... OK Start NFS server subsystem .......................................... OK Start X print server(s) ............................................. N/A Starting HP-UX Apache-based Web Server .............................. N/A Starting HP-UX Tomcat-based Servlet Engine .......................... N/A Starting HP-UX Webmin-based Admin ................................... N/A Starting the HPUX Webproxy subsystem ................................ N/A Starting HP-UX XML Web Server Tools ................................. OK Start kwdbd ......................................................... N/A Start NDDB Comm Server .............................................. N/A Start CDE login server .............................................. OK Starting PRNGD (Pseudo Random Number Generator Daemon) .............. N/A The system is ready. GenericSysName [HP Release B.11.23] (see /etc/issue) Press Q/q to quit, Enter to continue: Console Login: root Password: Please wait...checking for disk quotas (c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-2000 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-1993 The Open Software Foundation, Inc. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2003 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc. Press Q/q to quit, Enter to continue: RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U.S.A. Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19(c)(1,2). Press Q/q to quit, Enter to continue: Value of TERM has been set to "vt100". WARNING: YOU ARE SUPERUSER !! # ioscan -funC lan Class I H/W Path Driver S/W State H/W Type Description ================================================================== lan 0 0/0/0/0 btlan CLAIMED INTERFACE HP PCI 10/100Base-TX Core # ifconfig lan0 lan0: flags=843 inet 172.16.2.32 netmask ffff0000 broadcast 172.16.255.255 # exit logout root GenericSysName [HP Release B.11.23] (see /etc/issue) GSP Host Name: smslc GSP> co CO Leaving Guardian Service Processor Command Interface and entering Console mode. Type Ctrl-B to reactivate the GSP Command Interface. GenericSysName [HP Release B.11.23] (see /etc/issue) Console Login: root Password: Please wait...checking for disk quotas (c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-2000 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-1993 The Open Software Foundation, Inc. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2003 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause in DFARS 252.227-7013. Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U.S.A. Rights for non-DOD U.S. Government Departments and Agencies are as set forth in FAR 52.227-19(c)(1,2). Value of TERM has been set to "vt100". WARNING: YOU ARE SUPERUSER !! # uname HP-UX # uname -a HP-UX hpux B.11.23 U 9000/800 1562700538 unlimited-user license # ioscan -kfnC lan Class I H/W Path Driver S/W State H/W Type Description ================================================================== lan 0 0/0/0/0 btlan CLAIMED INTERFACE HP PCI 10/100Base-TX Core #