uxprdb04:root# pg crashconf
#!/sbin/sh
# @(#)B.11.31_LR        
# Crash dump configuration
#
#

# CRASHCONF_ENABLED: Configure crash dumps at boot time.
CRASHCONF_ENABLED=1

# For setting the included and excluded page classes and for setting the
# compression mode, use crashconf(1M). See crashconf(1M) for more details.

# CRASHCONF_READ_FSTAB: If set to 1, /etc/fstab will be scanned looking for
#               "dump" devices, which will be configured as crash dump
#               devices.
CRASHCONF_READ_FSTAB=1

# CRASHCONF_REPLACE: If set to 1, and if CRASHCONF_READ_FSTAB is 1, any dump
#               devices in /etc/fstab will override and replace the system's
#               current crash dump configuration (usually, the one compiled
#               into the kernel).  If set to 0, any such setting will be
#               *added* to the current settings rather than replacing them.
CRASHCONF_REPLACE=0

# CRASHCONF_COMPRESSED_DUMP: If set to 1, the dump compression mode will 
#               be turned ON. Any other value will turn the dump compression
#               mode to OFF.
CRASHCONF_COMPRESSED_DUMP=1

# CRASHCONF_CONCURRENT_DUMP: If set to 1, the concurrent dump mode will
#               be turned ON. Any other value will turn the concurrent dump
#               mode to OFF.
CRASHCONF_CONCURRENT_DUMP=1