System Console is on the Built-In Serial Interface igelan2: INITIALIZING HP PCI-X 1000Mbps Dual-port Built-in at hardware path 0/2/2/0 igelan0: INITIALIZING HP PCI-X 1000Mbps Dual-port Built-in at hardware path 0/1/1/0 igelan1: INITIALIZING HP PCI-X 1000Mbps Dual-port Built-in at hardware path 0/1/1/1 igelan3: INITIALIZING HP PCI-X 1000Mbps Dual-port Built-in at hardware path 0/2/2/1 Logical volume 64, 0x3 configured as ROOT Logical volume 64, 0x2 configured as SWAP Logical volume 64, 0x2 configured as DUMP Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216 Starting the STREAMS daemons-phase 1 Checking root file system. file system is clean - log replay is not required Root check done. Create STCP device files Starting the STREAMS daemons-phase 2 $Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $ Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 4163304 Kbytes, lockable: 2877044 Kbytes, available: 3348200 Kbytes /sbin/ioinitrc: /dev/vg00/lvol1:file system is clean - log replay is not required /sbin/krs_sysinit: mount: ignoring incomplete/incorrect entry for System in /etc/fstab mount: ignoring incomplete/incorrect entry for See in /etc/fstab * The module 'gvid_info' has been loaded. * The module 'rng' has been loaded. * The module 'dmpaa' has been loaded. * The module 'dmpaaa' has been loaded. * The module 'dmpap' has been loaded. * The module 'dmpapg' has been loaded. * The module 'dmpapf' has been loaded. * The module 'dmpjbod' has been loaded. * The module 'dmphpalua' has been loaded. * The module 'dmphdsalua' has been loaded. * The module 'ipf' has been loaded. mount: ignoring incomplete/incorrect entry for System in /etc/fstab mount: ignoring incomplete/incorrect entry for See in /etc/fstab $X@: ioinit: Rebooting the system because /etc/ioconfig and /stand/ioconfig files are inconsistent Shutdown at 10:01 (in 0 minutes) System shutdown time has arrived mount: ignoring incomplete/incorrect entry for System in /etc/fstab mount: ignoring incomplete/incorrect entry for See in /etc/fstab * The kernel registry database has been saved to disk. mount: ignoring incomplete/incorrect entry for System in /etc/fstab mount: ignoring incomplete/incorrect entry for See in /etc/fstab sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done