[root@localhost ~]# dmesg Linux version 2.6.9-55.ELsmp (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 17:03:35 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff60000 (usable) BIOS-e820: 00000000bff60000 - 00000000bff6e000 (ACPI data) BIOS-e820: 00000000bff6e000 - 00000000bff6f000 (ACPI NVS) BIOS-e820: 00000000bff6f000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 2175MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f8640 NX (Execute Disable) protection: active On node 0 totalpages: 786272 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 556896 pages, LIFO batch:16 DMI present. Using APIC driver default ACPI: RSDP (v002 PTLTD ) @ 0x000f8590 ACPI: XSDT (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000) @ 0xbff6438b ACPI: FADT (v003 NVIDIA MCP65-E 0x06040000 PTL_ 0x000f4240) @ 0xbff6d8a6 ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0xbff6d99a ACPI: WDAT (v001 PTLTD WDATTBL 0x06040000 LTP 0x00000001) @ 0xbff6da3a ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0xbff6db3e ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0xbff6dd86 ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0xbff6ddc2 ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0xbff6ddfaACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xbff6de62 ACPI: SLIC (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000001) @ 0xbff6de8a ACPI: DSDT (v001 NVIDIA MCP65 0x06040000 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:8 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) Built 1 zonelists Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c03f1000 soft=c03d1000 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 spurious 8259A interrupt: IRQ7. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3113276k/3145088k available (1882k kernel code, 30928k reserved, 761k data, 188k init, 2227584k highmem) Using HPET for base-timer Using HPET for gettimeofday Detected 2210.730 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 4423.83 BogoMIPS (lpj=2211916) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 per-CPU timeslice cutoff: 1461.77 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c03f2000 soft=c03d2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.17 BogoMIPS (lpj=2210089) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 Total of 2 processors activated (8844.01 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: CPU#0 had -1459002 usecs TSC skew, fixed it up. CPU#1 had 0 usecs TSC skew, fixed it up. Brought up 2 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 694k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xfde1b, last bus=9 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:08.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 16) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15 ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10 ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11 ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15 ACPI: PCI Interrupt Link [LSMB] (IRQs *10) ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11 ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:01.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:01.3[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 169 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 20 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:07.0[B] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 23 (level, low) -> IRQ 201 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt 0000:07:05.2[B] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt 0000:07:05.3[B] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt 0000:07:05.4[B] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 209 ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 217 ACPI-1134: *** Error: Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node f7e05260), AE_AML_BUFFER_LIMIT ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node f7e05260), AE_AML_BUFFER_LIMIT Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1216637467.901:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 3629C5F482105A7 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (69 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: TSSTcorp CDDVDW TS-L632N, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 6.3 Sensor: 1 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 9, 3145728 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: MAC0 P2P0 KBC0 MSE0 XVR3 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 188k freed SCSI subsystem initialized libata version 2.00 loaded. ahci 0000:00:0a.0: version 2.0 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 23 (level, low) -> IRQ 201 MSI INIT SUCCESS PCI: Setting latency timer of device 0000:00:0a.0 to 64 ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0a.0: flags: 64bit ncq pm led clo pmp pio ata1: SATA max UDMA/133 cmd 0xF880C100 ctl 0x0 bmdma 0x0 irq 201 ata2: SATA max UDMA/133 cmd 0xF880C180 ctl 0x0 bmdma 0x0 irq 201 ata3: SATA max UDMA/133 cmd 0xF880C200 ctl 0x0 bmdma 0x0 irq 201 ata4: SATA max UDMA/133 cmd 0xF880C280 ctl 0x0 bmdma 0x0 irq 201 scsi0 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8, max UDMA/100, 312581808 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-8, max UDMA/100, 312581808 sectors: LBA48 ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/100 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: SAMSUNG HM160HI Rev: HH10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: SAMSUNG HM160HI Rev: HH10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 355 types, 26 bools security: 55 classes, 22610 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sdb2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-55.ELsmp Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $ MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2) pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 17 (level, low) -> IRQ 177 ehci_hcd 0000:00:02.1: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 177, pci mem f8838000 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 169 ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 169, pci mem f883a000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ohci_hcd 0000:00:02.0: wakeup ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] usb 1-4: new high speed USB device using address 3 usb 2-3: new full speed USB device using address 2 Bluetooth: Core ver 2.6 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.7 usbcore: registered new driver hci_usb usb 2-6: new full speed USB device using address 3 EXT3 FS on sdb2, internal journal input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6 device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-6 device-mapper: dm-multipath version 1.0.5 loaded usb 2-9: new full speed USB device using address 4 cdrom: open failed. cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb3, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb9, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb9, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb6, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb10, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb10, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb7, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb8, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb8, type ext3), uses xattr SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c0346240(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 Adding 5116660k swap on /dev/sdb5. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts cdrom: open failed. cdrom: open failed. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 340 bytes per conntrack SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts i2c /dev entries driver lp: driver loaded but no devices found [root@localhost ~]# [root@localhost ~]# lspci -v 00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping 00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0 I/O ports at 1d00 [size=256] 00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: 66Mhz, fast devsel, IRQ 10 I/O ports at 3080 [size=64] I/O ports at 3040 [size=64] I/O ports at 3000 [size=64] Capabilities: [44] Power Management version 2 00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11 Memory at f2200000 (32-bit, non-prefetchable) [size=512K] 00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 169 Memory at f2486000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 177 Memory at f2488000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 185 Memory at f2487000 (32-bit, non-prefetchable) [size=4K] I/O ports at 30e0 [size=8] Capabilities: [44] Power Management version 2 00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 193 Memory at f2480000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [6c] HyperTransport: MSI Mapping 00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Flags: bus master, 66Mhz, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 Memory behind bridge: f2100000-f21fffff Capabilities: [b8] #0d [0000] Capabilities: [8c] HyperTransport: MSI Mapping 00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0 I/O ports at 30c0 [size=16] Capabilities: [44] Power Management version 2 00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 201 I/O ports at 30f8 [size=8] I/O ports at 30ec [size=4] I/O ports at 30f0 [size=8] I/O ports at 30e8 [size=4] I/O ports at 30d0 [size=16] Memory at f2484000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 00:0b.0 PCI bridge: nVidia Corporation: Unknown device 045b (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f2000000-f20fffff Prefetchable memory behind bridge: 00000000f2500000-00000000f2500000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: cc000000-ceffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2600000-00000000f2700000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] #0f [0010] 03:00.0 Network controller: Broadcom Corporation: Unknown device 4328 (rev 03) Subsystem: Hewlett-Packard Company: Unknown device 1366 Flags: bus master, fast devsel, latency 0, IRQ 209 Memory at f2000000 (64-bit, non-prefetchable) [size=16K] Memory at f2500000 (64-bit, prefetchable) [size=1M] Capabilities: [40] Power Management version 2 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 1a-00-f2-ff-ff-73-61-70 Capabilities: [16c] Power Budgeting 05:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0427 (rev a1) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, fast devsel, latency 0, IRQ 217 Memory at ce000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at cc000000 (64-bit, non-prefetchable) [size=32M] I/O ports at 4000 [size=128] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting Capabilities: [600] Unknown (11) 07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, medium devsel, latency 64, IRQ 5 Memory at f2100000 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 07:05.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, medium devsel, latency 64, IRQ 7 Memory at f2100800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 07:05.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 12) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, medium devsel, latency 64, IRQ 7 Memory at f2100c00 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, medium devsel, latency 64, IRQ 7 Memory at f2101000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) Subsystem: Hewlett-Packard Company: Unknown device 30cf Flags: bus master, medium devsel, latency 64, IRQ 7 Memory at f2101400 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 [root@localhost ~] [root@localhost ~]# cat /etc/modprobe.conf alias scsi_hostadapter ahci alias usb-controller ehci-hcd alias usb-controller1 ohci-hcd alias eth0 3c501 [root@localhost ~]# [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Please read /usr/share/doc/initscripts-*/sysconfig.txt # for the documentation of these parameters. ONBOOT=yes USERCTL=no IPV6INIT=no PEERDNS=yes TYPE=Ethernet DEVICE=eth0 BOOTPROTO=dhcp [root@localhost ~]#