>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Sat Oct  4 13:56:17 2003

server1 sent Event Monitor notification information:

/storage/events/disks/default/8_4.10.0 is >= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Sat Oct  4 13:56:17 2003
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 100237              
System..............: server1.kadena.af.mil

Summary:
     Disk at hardware path 8/4.10.0 : Media failure


Description of Error:

     The device was unsuccessful in reading or writing data for the current I/O
     request due to an error on the medium. The data could not be recovered. 

Probable Cause / Recommended Action:

     Reformatting the medium may fix the problem.

     Alternatively, the medium in the device is flawed. If the medium is
     removable, replace the medium with a fresh one.

     Alternatively, if the medium is not removable, the device has experienced
     a hardware failure. Repair or replace the device, as necessary.

Additional Event Data: 
     System IP Address...: 132.15.139.219
     Event Id............: 0x3f7e52f100000000
     Monitor Version.....: B.01.00
     Event Class.........: I/O
     Client Configuration File...........:
     /var/stm/config/tools/monitor/default_disk_em.clcfg 
     Client Configuration File Version...: A.01.00 
          Qualification criteria met.
               Number of events..: 1 
     Associated OS error log entry id(s): 
          0x3f7e52f100000000
     Additional System Data:
          System Model Number.............: 9000/861 
          OS Version......................: B.11.00 
          STM Version.....................: A.24.00 
          EMS Version.....................: A.03.20 
     Latest information on this event:
          http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100237

v-v-v-v-v-v-v-v-v-v-v-v-v    D  E  T  A  I  L  S    v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data: 
     Physical Device Path...: 8/4.10.0
     Device Class...........: Disk
     Inquiry Vendor ID......: SEAGATE 
     Inquiry Product ID.....: ST34572WC       
     Firmware Version.......: HP03
     Serial Number..........: JK7534390FZBTD

Product/Device Identification Information:

     Logger ID.........: sdisk
     Product Identifier: SCSI Disk
     Product Qualifier.: SEAGATEST34572WC
     SCSI Target ID....: 0x0A
     SCSI LUN..........: 0x00

I/O Log Event Data: 

     Driver Status Code..................: 0x0000007C 
     Length of Logged Hardware Status....: 22 bytes. 
     Offset to Logged Manager Information: 24 bytes. 
     Length of Logged Manager Information: 34 bytes. 

Hardware Status: 

     Raw H/W Status:
          0x0000: 00 00 00 02   F0 00 03 00   01 4C AA 0A   00 00 00 00
          0x0010: 11 00 EA 80   01 0A

     SCSI Status...: CHECK CONDITION (0x02) 
          Indicates that a contingent allegiance condition has occurred.  Any
          error, exception, or abnormal condition that causes sense data to be
          set will produce the CHECK CONDITION status.
     
SCSI Sense Data: 

     Undecoded Sense Data:
          0x0000: F0 00 03 00   01 4C AA 0A   00 00 00 00   11 00 EA 80
          0x0010: 01 0A
     
     SCSI Sense Data Fields:
          Error Code                      : 0x70
          Segment Number                  : 0x00
          Bit Fields:      
               Filemark                   : 0
               End-of-Medium              : 0
               Incorrect Length Indicator : 0
          Sense Key                       : 0x03
          Information Field Valid         : TRUE
          Information Field               : 0x00014CAA
          Additional Sense Length         : 10
          Command Specific                : 0x00000000
          Additional Sense Code           : 0x11
          Additional Sense Qualifier      : 0x00
          Field Replaceable Unit          : 0xEA
          Sense Key Specific Data Valid   : TRUE
          Sense Key Specific Data         : 0x80 0x01 0x0A
                       
          Sense Key 0x03, MEDIUM ERROR, indicates that the command terminated
          with a nonrecovered error condition that was probably caused by a
          flaw in the medium or an error in the recorded data.  This sense key
          may also be returned if the device is unable to distinguish between a
          flaw in the medium and a specific hardware failure (sense key 0x04).
          For the RECOVERED ERROR, HARDWARE ERROR, or MEDIUM ERROR Sense Key,
          the Sense Key Specific data indicates that 266 retries were
          attempted.
                       
          The combination of Additional Sense Code and Sense Qualifier (0x1100)
          indicates: Unrecovered read error.

SCSI Command Data Block:

     Command Data Block Contents:
          0x0000: 28 00 00 01   4C A0 00 00   10 00
     
     Command Data Block Fields (10-byte fmt):
          Command Operation Code...(0x28)..: READ
          Logical Unit Number..............: 0
          DPO Bit..........................: 0
          FUA Bit..........................: 0
          Relative Address Bit.............: 0
          Logical Block Address............: 85152 (0x00014CA0)
          Transfer Length..................: 16 (0x0010)

Manager-Specific Data Fields: 
     Request ID.............: 0x00337601 
     Data Residue...........: 0x00000C00 
     CDB status.............: 0x00000002 
     Sense Status...........: 0x00000000 
     Bus ID.................: 0x00 
     Target ID..............: 0x0A 
     LUN ID.................: 0x00 
     Sense Data Length......: 0x12 
     Q Tag..................: 0x77 
     Retry Count............: 65462


>---------- End Event Monitoring Service Event Notification ----------<