memory test 71A4 memory test 71A5 memory test 71A6 memory test 71A3 memory test 71A4 memory test 71A4 memory test 71A5 memory test 71A5 memory test 71A6 memory test 71A6 memory config 7210 I/O INIT 8701 I/O test 8118 I/O test 8118 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 memory config 7240 memory INIT 7702 memory config 72A0 memory test 71A1 memory test 71A2 memory test 71A4 memory test 71A5 memory test 71A6 memory test 71A3 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory config 7240 I/O config 8204 I/O config 8204 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O config 8204 processor test 1120 processor test 1133 processor test 1135 processor test 1152 processor test 1139 processor test 113A processor test 113B processor test 113C processor test 113D processor test 113E processor INIT 1701 processor test 1120 processor test 1120 processor test 1133 processor test 1135 processor test 1152 processor test 1139 processor test 113A processor test 113B processor test 113C processor test 113D processor test 113E processor INIT 1701 processor test 1120 processor slave rendezvous 1C40 processor test 1142 processor test 113B platform test 612A I/O config 8238 ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.43 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 750 MHz Active Functional 750 KB 1.5 MB 2 750 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 133 Available Memory : 4194304 KB Good Memory Required : 31560 KB Primary boot path: 0/0/1/1.0 Alternate boot path: 0/0/2/0.0 Console path: 0/0/4/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from first available device. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.43 Apr 12, 2000 ISL booting hpux -lq (;0)/stand/vmunix Boot : disk(0/0/1/1.0.0.0.0.0.0;0)/stand/vmunix 10256384 + 1847296 + 1712304 start 0x205868 alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x7fa00000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: autofs_link(): File system was registered at index 3. NOTICE: cachefs_link(): File system was registered at index 5. NOTICE: nfs3_link(): File system was registered at index 6. System Console is on the Built-In Serial Interface Logical volume 64, 0x3 configured as ROOT Logical volume 64, 0x2 configured as SWAP Logical volume 64, 0x2 configured as DUMP Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216 Starting the STREAMS daemons-phase 1 Checking root file system. Root check done. ************* SYSTEM ALERT ************** SYSTEM NAME: webconsole DATE: 02/01/2007 TIME: 20:44:02 ALERT LEVEL: 12 = Software failure REASON FOR ALERT SOURCE: 1 = processor SOURCE DETAIL: 1 = processor general SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. 0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code 0x58E008C01100B800 00006B01 01142C02 - type 11 = Timestamp 02/01/2007 20:44:02 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:X ***************************************** CAUTION: System Alerts have been disabled. This will re-enable with a re-boot or power-on of the system. To re-enable system alerts now, you may use the AC (Alert Display Configuration) command. ************* SYSTEM ALERT ************** Alert messages are now disabled. Enter Commands Interface AC command to enable them again ***************************************** *** Proceeding with selective dump. *** The dump may be aborted at any time by pressing ESC. *** Dumping: 0% complete (0 of 323 MB) (device 64:0x2) *** Dumping: 2% complete (8 of 323 MB) (device 64:0x2) *** Dumping: 4% complete (16 of 323 MB) (device 64:0x2) *** Dumping: 7% complete (24 of 323 MB) (device 64:0x2) *** Dumping: 9% complete (32 of 323 MB) (device 64:0x2) *** Dumping: 12% complete (40 of 323 MB) (device 64:0x2) *** Dumping: 14% complete (48 of 323 MB) (device 64:0x2) ESC was detected. Press Y within 10 seconds to abort the dump, or press any other key to continue. *** Continuing dump. *** Dumping: 17% complete (56 of 323 MB) (device 64:0x2) ESC was detected. Press Y within 10 seconds to abort the dump, or press any other key to continue. *** Continuing dump. *** Dumping: 19% complete (64 of 323 MB) (device 64:0x2) *** Dumping: 22% complete (72 of 323 MB) (device 64:0x2) ESC was detected. Press Y within 10 seconds to abort the dump, or press any other key to continue. *** Continuing dump. *** Dumping: 24% complete (80 of 323 MB) (device 64:0x2) ESC was detected. Press Y within 10 seconds to abort the dump, or press any other key to continue. *** Dump aborted by pressing ESC. System rebooting. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. platform config 626F processor slave rendezvous 1C17 processor test 1142 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 PDH config 322F PDH test 3149 PDH test 3160 platform test 616A processor test 1146 processor INIT 1701 processor INIT 1701 processor test 1110 processor test 1110 processor test 1111 processor test 1111 processor test 1112 processor test 1112 processor test 1113 processor test 1113 processor test 1114 processor test 1114 processor test 1115 processor test 1115 processor test 1116 processor test 1116 processor test 1117 processor test 1117 processor test 1118 processor test 1118 processor test 1119 processor test 1119 processor test 111A processor test 111A processor test 111C processor test 111C processor test 111D processor test 111D processor cache test 2111 processor cache test 2111 processor cache test 2112 processor cache test 2112 processor cache test 2113 processor cache test 2113 processor cache test 2121 processor cache test 2121 processor cache test 2122 processor cache test 2122 processor cache test 2122 processor cache test 2122 processor test 1151 processor test 1151 processor INIT 1701 processor INIT 1701 processor test 1110 processor test 1110 processor slave rendezvous 1C17 processor test 1142 processor slave rendezvous 1C10 processor test 1142 PDH test 3158 PDH test 3157 PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E memory config 7210 memory INIT 7702 memory INIT 771D memory config 7230 platform power on/off 6300 HP Guardian Service Processor Firmware Revision B.02.20 Apr 14 2003,11:03:46 (c) Copyright Hewlett-Packard Company 1999-2002. All Rights Reserved. Type Ctrl-B to activate the GSP Command Interface. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. platform config 626F processor slave rendezvous 1C17 processor test 1142 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 PDH config 322F PDH test 3149 PDH test 3160 platform test 616A processor test 1146 processor INIT 1701 processor INIT 1701 processor test 1110 processor test 1110 processor test 1111 processor test 1111 processor test 1112 processor test 1112 processor test 1113 processor test 1113 processor test 1114 processor test 1114 processor test 1115 processor test 1115 processor test 1116 processor test 1116 processor test 1117 processor test 1117 processor test 1118 processor test 1118 processor test 1119 processor test 1119 processor test 111A processor test 111A processor test 111C processor test 111C processor test 111D processor test 111D processor cache test 2111 processor cache test 2111 processor cache test 2112 processor cache test 2112 processor cache test 2113 processor cache test 2113 processor cache test 2121 processor cache test 2121 processor cache test 2122 processor cache test 2122 processor cache test 2122 processor cache test 2122 processor test 1151 processor test 1151 processor INIT 1701 processor INIT 1701 processor test 1110 processor test 1110 processor slave rendezvous 1C17 processor test 1142 processor slave rendezvous 1C10 processor test 1142 PDH test 3158 PDH test 3157 PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E memory config 7210 memory INIT 7702 memory INIT 771D memory config 7230 memory config 7231 memory config 7231 memory test 7150 memory config 7213 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7215 memory config 7216 memory config 72A0 memory test 71A1 memory test 71A2 memory test 71A4 memory test 71A5 memory test 71A6 memory test 71A3 memory test 71A4 memory test 71A4 memory test 71A5 memory test 71A5 memory test 71A6 memory test 71A6 memory config 7210 I/O INIT 8701 I/O test 8118 I/O test 8118 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 memory config 7240 memory INIT 7702 memory config 72A0 memory test 71A1 memory test 71A2 memory test 71A4 memory test 71A5 memory test 71A6 memory test 71A3 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory config 7240 I/O config 8204 I/O config 8204 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O config 8204 processor test 1120 processor test 1133 processor test 1135 processor test 1152 processor test 1139 processor test 113A processor test 113B processor test 113C processor test 113D processor test 113E processor INIT 1701 processor test 1120 processor test 1120 processor test 1133 processor test 1135 processor test 1152 processor test 1139 processor test 113A processor test 113B processor test 113C processor test 113D processor test 113E processor INIT 1701 processor test 1120 processor slave rendezvous 1C40 processor test 1142 processor test 113B platform test 612A I/O config 8238 ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.43 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 750 MHz Active Functional 750 KB 1.5 MB 2 750 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 133 Available Memory : 4194304 KB Good Memory Required : 31560 KB Primary boot path: 0/0/1/1.0 Alternate boot path: 0/0/2/0.0 Console path: 0/0/4/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from first available device. To discontinue, press any key within 10 seconds. Boot terminated. ---- Main Menu --------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration menu Displays or sets boot values INformation menu Displays hardware information SERvice menu Displays service commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ---- Main Menu: Enter command or menu > bsea Searching for potential boot device(s) This may take several minutes. To discontinue search, press any key (termination may not be immediate). IODC Path# Device Path (dec) Device Path (mnem) Device Type Rev ----- ----------------- ------------------ ----------- ---- P0 0/0/1/0.3 extscsi.3 Sequential access media 1 P1 0/0/1/0.1 extscsi.1 Random access media 1 P2 0/0/2/0.2 intscsia.2 Random access media 1 P3 0/0/2/0.0 intscsia.0 Random access media 1 Main Menu: Enter command or menu > bo p2 Interact with IPL (Y, N, or Cancel)?> n Booting... Boot IO Dependent Code (IODC) revision 1 IPL error: bad LIF magic. ************* SYSTEM ALERT ************** SYSTEM NAME: webconsole DATE: 02/02/2007 TIME: 07:19:46 ALERT LEVEL: 6 = Boot possible, pending failure - action required REASON FOR ALERT SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. 0x00000060860010B0 00000000 00000000 - type 0 = Data Field Unused 0x58000860860010B0 00006B01 0207132E - type 11 = Timestamp 02/02/2007 07:19:46 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! ***************************************** ************* SYSTEM ALERT ************** SYSTEM NAME: webconsole DATE: 02/02/2007 TIME: 07:19:46 ALERT LEVEL: 6 = Boot possible, pending failure - action required REASON FOR ALERT SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. 0x00000060860014F0 00000000 00000000 - type 0 = Data Field Unused 0x58000860860014F0 00006B01 0207132E - type 11 = Timestamp 02/02/2007 07:19:46 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! ***************************************** ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. platform config 626F processor slave rendezvous 1C17 processor test 1142 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 PDH config 322F PDH test 3149 PDH test 3160 platform test 616A processor test 1146 processor INIT 1701 processor INIT 1701 processor test 1110 processor test 1110 processor test 1111 processor test 1111 processor test 1112 processor test 1112 processor test 1113 processor test 1113 processor test 1114 processor test 1114 processor test 1115 processor test 1115 processor test 1116 processor test 1116 processor test 1117 processor test 1117 processor test 1118 processor test 1118 processor test 1119 processor test 1119 processor test 111A processor test 111A processor test 111C processor test 111C processor test 111D processor test 111D processor cache test 2111 processor cache test 2111 processor cache test 2112 processor cache test 2112 processor cache test 2113 processor cache test 2113 processor cache test 2121 processor cache test 2121 processor cache test 2122 processor cache test 2122 processor cache test 2122 processor cache test 2122 processor test 1151 processor test 1151 processor INIT 1701 processor INIT 1701 processor test 1110 processor test 1110 processor slave rendezvous 1C17 processor test 1142 processor slave rendezvous 1C10 processor test 1142 PDH test 3158 PDH test 3157 PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E PDH test 316E memory config 7210 memory INIT 7702 memory INIT 771D memory config 7230 memory config 7231 memory config 7231 memory test 7150 memory config 7213 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7213 memory config 7214 memory config 7214 memory config 7213 memory config 7215 memory config 7216 memory config 72A0 memory test 71A1 memory test 71A2 memory test 71A4 memory test 71A5 memory test 71A6 memory test 71A3 memory test 71A4 memory test 71A4 memory test 71A5 memory test 71A5 memory test 71A6 memory test 71A6 memory config 7210 I/O INIT 8701 I/O test 8118 I/O test 8118 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 I/O INIT 8701 memory config 7240 memory INIT 7702 memory config 72A0 memory test 71A1 memory test 71A2 memory test 71A4 memory test 71A5 memory test 71A6 memory test 71A3 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A4 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A5 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory test 71A6 memory config 7240 I/O config 8204 I/O config 8204 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O test 8119 I/O config 8204 processor test 1120 processor test 1133 processor test 1135 processor test 1152 processor test 1139 processor test 113A processor test 113B processor test 113C processor test 113D processor test 113E processor INIT 1701 processor test 1120 processor test 1120 processor test 1133 processor test 1135 processor test 1152 processor test 1139 processor test 113A processor test 113B processor test 113C processor test 113D processor test 113E processor INIT 1701 processor test 1120 processor slave rendezvous 1C40 processor test 1142 processor test 113B platform test 612A I/O config 8238 ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.43 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 750 MHz Active Functional 750 KB 1.5 MB 2 750 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 133 Available Memory : 4194304 KB Good Memory Required : 31560 KB Primary boot path: 0/0/1/1.0 Alternate boot path: 0/0/2/0.0 Console path: 0/0/4/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from first available device. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.43 Apr 12, 2000 ISL booting hpux -lq (;0)/stand/vmunix Boot : disk(0/0/1/1.0.0.0.0.0.0;0)/stand/vmunix 10256384 + 1847296 + 1712304 start 0x205868 alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x7fa00000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: autofs_link(): File system was registered at index 3. NOTICE: cachefs_link(): File system was registered at index 5. NOTICE: nfs3_link(): File system was registered at index 6. System Console is on the Built-In Serial Interface Logical volume 64, 0x3 configured as ROOT Logical volume 64, 0x2 configured as SWAP Logical volume 64, 0x2 configured as DUMP Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216 Starting the STREAMS daemons-phase 1 Checking root file system. Root check done. ************* SYSTEM ALERT ************** SYSTEM NAME: webconsole DATE: 02/02/2007 TIME: 07:26:49 ALERT LEVEL: 12 = Software failure REASON FOR ALERT SOURCE: 1 = processor SOURCE DETAIL: 1 = processor general SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH FLASH ON ON LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. 0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code 0x58E008C01100B800 00006B01 02071A31 - type 11 = Timestamp 02/02/2007 07:26:49 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! ***************************************** ************* SYSTEM ALERT ************** SYSTEM NAME: webconsole DATE: 02/02/2007 TIME: 07:26:49 ALERT LEVEL: 12 = Software failure REASON FOR ALERT SOURCE: 1 = processor SOURCE DETAIL: 1 = processor general SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER OFF OFF OFF OFF FLASH System Power is Off. 0xA0E000C01100B000 00000000 000005E9 - type 20 = major change in system state 0x58E008C01100B000 00006B01 02071A31 - type 11 = Timestamp 02/02/2007 07:26:49 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! ***************************************** ************* SYSTEM ALERT ************** SYSTEM NAME: webconsole DATE: 02/02/2007 TIME: 07:26:59 ALERT LEVEL: 3 = System blocked waiting for operator input REASON FOR ALERT SOURCE: 1 = processor SOURCE DETAIL: 1 = processor general SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER OFF OFF OFF OFF FLASH System Power is Off. 0xF8E000301100E000 00000000 0000E000 - type 31 = legacy PA HEX chassis-code 0x58E008301100E000 00006B01 02071A3B - type 11 = Timestamp 02/02/2007 07:26:59 A: ack read of this entry - X: Disable all future alert messages Anything else skip redisplay the log entry ->Choice:Timeout! *****************************************