vfp VFP This command activates the immediate display of the Virtual Front Panel. LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) PDH test 3156 Proceed with Live Mode of VFP? (Y/[N]) y y GSP Host Name: uninitialized GSP> ********** VIRTUAL FRONT PANEL ********** VFP command executing... Q/q: to quit Virtual Front Panel Display ->Choice: ***************************************** platform power on/off 6300 platform power on/off 6300 platform config 6224 processor test 1141 PDH config 3277 PDH config 3278 *************** LIVE VFP **************** System Boot detected ***************************************** processor test 1142 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 processor test 1100 PDH config 322F PDH test 3149 PDH test 3160 platform test 616A processor test 1146 processor INIT 1701 processor test 1110 processor test 1111 processor test 1112 processor test 1113 processor test 1114 processor test 1115 processor test 1116 processor test 1117 processor test 1118 processor test 1119 processor test 111A processor test 111C processor test 111D processor cache test 2111 processor cache test 2112 processor cache test 2113 processor cache test 2121 processor cache test 2122 processor cache test 2122 processor test 1151 processor INIT 1701 processor test 1110 processor test 1142 processor test 1142 PDH test 3158 ***** EARLY BOOT VFP : SYSTEM ALERT ***** SYSTEM NAME: uninitialized DATE: 02/15/2007 TIME: 14:37:41 ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation REASON FOR ALERT SOURCE: 3 = PDH SOURCE DETAIL: 2 = ROM SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH FLASH OFF ON ON LED State: Running non-OS code. Non-critical error detected. Check Chassis and Console Logs for error messages. 0x000000F032001560 00000000 00000002 - type 0 = Data Field Unused 0x580008F032001560 00006B01 0F0E2529 - type 11 = Timestamp 02/15/2007 14:37:41 A/a: ack read of this entry - Q/q: quit Virtual Front Panel Display Anything else redisplay the log entry ->Choice:Timeout! ***************************************** a ***************************************** Invalid choice. Q/q: quit EARLY BOOT VFP ***************************************** a ***************************************** Invalid choice. Q/q: quit EARLY BOOT VFP ***************************************** A ***************************************** Invalid choice. Q/q: quit EARLY BOOT VFP ***************************************** A ***************************************** Invalid choice. Q/q: quit EARLY BOOT VFP ***************************************** q ***************************************** Reactivating console. Type Ctrl-B to access Guardian Service Processor Commands Leaving Console Mode - you may lose write access. When Console Mode returns, type ^Ecf to get console write access. Service Processor login: Service Processor password: Hewlett-Packard Guardian Service Processor (c) Copyright Hewlett-Packard Company 1999-2002. All Rights Reserved. System Name: uninitialized ************************************************************************* GSP ACCESS IS NOT SECURE No GSP users are currently configured and remote access is enabled. Set up a user with a password (see SO command) OR Disable all types of remote access (see EL and ER commands) ************************************************************************* GSP Host Name: uninitialized GSP>