/opt/resmon/bin/resdata -R 185729082 -r /storage/events/disks/default/0_3_1_0.0.0 -n 185729280 -a

CURRENT MONITOR DATA:

Event Time..........: Wed Jul  1 22:36:54 2009
Severity............: MAJORWARNING
Monitor.............: disk_em
Event #.............: 100091
System..............: hp86

Summary:
     Disk at hardware path 0/3/1/0.0.0 : Software configuration error


Description of Error:

     The device is in a condition where it requires action on the part of the
     device driver or a human operator.

Probable Cause / Recommended Action:

     The device has been reset by a Bus Device Reset message, a hard reset
     condition, or a power-on reset.

     If this is the case, no action is necessary.

     Alternatively, a removable medium has been loaded or replaced.

     If this is the case, no action is necessary.

     Alternatively, the mode parameters, microcode, or inquiry data for the
     device have been changed.

     If this is the case, no action is necessary.

     Alternatively, the installed version of the device driver does not match
     that of the installed version of HP-UX. Install the correct version of the
     driver.

Additional Event Data:
     System IP Address...: 153.6.61.86
     Event Id............: 0x4a4c1d4600000000
     Monitor Version.....: B.01.01
     Event Class.........: I/O
     Client Configuration File...........:
     /var/stm/config/tools/monitor/default_disk_em.clcfg
     Client Configuration File Version...: A.01.00
          Qualification criteria met.
               Number of events..: 1
     Associated OS error log entry id(s):
          0x4a4c1d4500000000
     Additional System Data:
          System Model Number.............: 9000/800/rp3440
          OS Version......................: B.11.11
          STM Version.....................: A.45.00
          EMS Version.....................: A.04.00
     Latest information on this event:
          http://docs.hp.com/hpux/content/hardware/ems/scsi.htm#100091

v-v-v-v-v-v-v-v-v-v-v-v-v    D  E  T  A  I  L  S    v-v-v-v-v-v-v-v-v-v-v-v-v



Component Data:
     Physical Device Path...: 0/3/1/0.0.0
     Device Class...........: Disk
     Inquiry Vendor ID......: HP 73.4G
     Inquiry Product ID.....: ST373307LC
     Firmware Version.......: HPC5
     Serial Number..........: 3HZ7P64P000074522MTR

Product/Device Identification Information:

     Logger ID.........: sdisk
     Product Identifier: SCSI Disk
     Product Qualifier.: HP73.4GST373307LC
     SCSI Target ID....: 0x00
     SCSI LUN..........: 0x00

I/O Log Event Data:

     Driver Status Code..................: 0x0000000B
     Length of Logged Hardware Status....: 22 bytes.
     Offset to Logged Manager Information: 24 bytes.
     Length of Logged Manager Information: 34 bytes.

Hardware Status:

     Raw H/W Status:
          0x0000: 00 00 00 02   70 00 06 00   00 00 00 0A   00 00 00 00
          0x0010: 29 02 02 00   00 00

     SCSI Status...: CHECK CONDITION (0x02)
          Indicates that a contingent allegiance condition has occurred.  Any
          error, exception, or abnormal condition that causes sense data to be
          set will produce the CHECK CONDITION status.

SCSI Sense Data:

     Undecoded Sense Data:
          0x0000: 70 00 06 00   00 00 00 0A   00 00 00 00   29 02 02 00
          0x0010: 00 00

     SCSI Sense Data Fields:
          Error Code                      : 0x70
          Segment Number                  : 0x00
          Bit Fields:
               Filemark                   : 0
               End-of-Medium              : 0
               Incorrect Length Indicator : 0
          Sense Key                       : 0x06
          Information Field Valid         : FALSE
          Information Field               : 0x00000000
          Additional Sense Length         : 10
          Command Specific                : 0x00000000
          Additional Sense Code           : 0x29
          Additional Sense Qualifier      : 0x02
          Field Replaceable Unit          : 0x02
          Sense Key Specific Data Valid   : FALSE
          Sense Key Specific Data         : 0x00 0x00 0x00

          Sense Key 0x06, UNIT ATTENTION, indicates that the target has been
          reset by a BUS DEVICE RESET message, a hard reset condition, or by a
          power-on reset. If not a reset, then one of the following may have
          occurred.
             1. A removable medium may have been changed.
             2. The mode parameters in effect for this initiator have been
             changed by another initiator.
             3. The version or level of microcode has been changed.
             4. Tagged commands queued for this initiator were cleared by
             another initiator.
             5. INQUIRY data has been changed.
             6. The mode parameters in effect for this initiator have been
             restored from non-volatile memory.
             7. A change in the condition of a synchronized spindle.
             8. Any other event that requires the attention of the initiator.

SCSI Command Data Block:

     Command Data Block Contents:
          0x0000: 2A 00 02 3D   AB 40 00 00   08 00

     Command Data Block Fields (10-byte fmt):
          Command Operation Code...(0x2A)..: WRITE
          Logical Unit Number..............: 0
          DPO Bit..........................: 0
          FUA Bit..........................: 0
          Relative Address Bit.............: 0
          Logical Block Address............: 37595968 (0x023DAB40)
          Transfer Length..................: 8 (0x0008)

Manager-Specific Data Fields:
     Request ID.............: 0x045D6DF4
     Data Residue...........: 0x00001000
     CDB status.............: 0x00000002
     Sense Status...........: 0x00000000
     Bus ID.................: 0x04
     Target ID..............: 0x00
     LUN ID.................: 0x00
     Sense Data Length......: 0x12
     Q Tag..................: 0x73
     Retry Count............: 0