File: c:\temp\binary.errlog
Event: Tru64 UNIX CAM Event occurred at Sun, 11 Jan 2004 19:55:18 +0000

COMMON EVENT HEADER (CEH) V2.0 OS_Type  1 -- Tru64 UNIX 
Hardware_Arch 4 -- Alpha 
CEH_Vendor_ID 3,564 -- Compaq Computer Corp 
Hdwr_Sys_Type 0 -- Unrecognized System Type 
Logging_CPU 0 -- CPU Logging this Event 
CPUs_In_Active_Set 1  
Entry_Type 199 -- Tru64 UNIX CAM Event  
DSR_Msg_Num 1,839 -- COMPAQ AlphaServer DS10 466Mhz 
Chip_Type 8 -- EV6 - 21264 
CEH_Device 0  
CEH_Device_ID_0 x0000 0003  
CEH_Device_ID_1 x0000 0001  
CEH_Device_ID_2 x0000 0000  
Unique_ID_Count 3,713  
Unique_ID_Prefix 40,272  




TLV Section of CEH TLV_DSR_String COMPAQ AlphaServer DS10 466 MHz 
TLV_OS_Version Digital UNIX V4.0F (Rev. 1229) 
TLV_Sys_Serial_Num AY00610626 
TLV_Time_as_Local Sun, 11 Jan 2004 19:55:18 +0000 
TLV_Computer_Name od01u 






UNIX CAM & I2O Event Header CAM_hdr_type 199  
CAM_hdr_class x01 Tape 
CAM_hdr_subsystem x0000 0001  
CAM_hdr_entries 9  


--- CAM Subpacket Support, Decomposer Supporting Class Start CAM SCSI Subpackets START OF SUBPACKETS IN THIS ENTRY 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 258 Module Name String 


Module Name String Sub-Packet Module_Name_Str ctape_move_tape 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 260 Hardware Error String 


Hardware Error String Sub-Packet Hardware_Error_Str Hard Error Detected 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 257 Device Name String 


Device Name String Sub-Packet Device_Name DEC TZ89 (C) DEC2150 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 256 Generic String 


Generic String Sub-Packet Generic_String Active CCB at time of error 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 256 Generic String 


Generic String Sub-Packet Generic_String CCB request completed with an error 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 1  


CAM SCSI I/O Request CCB Structure Sub-Packet cam_ccb_len 192  
camfunc_code x01  
cam_status xC4  
cam_path x03 Logical SCSI Bus # 
cam_target x01 Logical Host Target # 
cam_lun x00 Logical Unit Number (LUN) 
cam_flags x0000 00C0  
cam_dxfer_len 0  
cam_sense_len 72  
cam_cdb_len 6  
cam_sglist_cnt 0  
cam_scsi_status x02 Check Condition 
cam_timeout 3,600  
cam_msg_len 0  
cam_vu_flags x0000  
cam_tag_action x00  
cam_sim_priv0 xFFFF FC00 3D10 1358  
cam_sim_priv1 x0000 0000 DEC0 0DEC  
cam_sim_priv2 x0000 0000 0000 0000  
cam_sim_priv3 x0000 0000 0000 0000  
cam_sim_priv4 x0000 0000 0000 0000  
cam_sim_priv5 x0000 0000 0000 0000  
cam_sim_priv6 x0000 0000 0000 0000  


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 256 Generic String 


Generic String Sub-Packet Generic_String Error, exception, or abnormal condition 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 256 Generic String 


Generic String Sub-Packet Generic_String NOT READY - Logical unit is NOT ready 


UNIX CAM, SWXCR & I2O Sub-Packet Header CAM_ent_type 768 CAM Sense Data 


SCSI Sense Data Sense_byte_0 xF0  
   Error Code[6:0] x70  
   Valid[7] x1  
   
Sense_Key x02  
   Sense_Key[3:0] x2 Not Ready 
   
Info_bytes x0000 0000 Usually LBA 
Additional_Sense_Len 22  
Cmd_spec_info0 x0000 0000  
ASCQ_ASC x0204 Logical Unit Not Ready, Initializing Cmd. Required 
   ASC[7:0] x4  
   ASCQ[15:8] x2  
   
FRU_code x00  
Sense_Key_Specfic_Byte0 x00  
Sense_Key_Specfic_Bytes 0  
Additional_Sense_Bytes Dump starting at offset: x402[x0] x0026790000990682 
[x8] x0000000000000000 
[x10] x0000000000000000 
[x18] x0000000000000000 
[x20] x0000000000000000 
[x28] x0000000000000000 
[x30] x0000