show connections                show acl        show connections                show tech_support CLI> show version Firmware version: 4.32 build 300 Hardware Revision: 7 Internal EMU Rev: 1.86 (GB2041804D) External Box EMU 2 Rev: CP20 (8A44LMPXK5AN) External Box EMU 3 Rev: CP20 (8A44LMPXL5BY) CLI> show profile Profile name = Default (Default) Mode 0 = Peripheral Device LUN Addressing Mode 1 = Legacy Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout selected initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Do not send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Ignore Force Unit Access on Write Profile name = Windows Mode 0 = Peripheral Device LUN Addressing Mode 1 = Legacy Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout selected initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Do not send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Ignore Force Unit Access on Write Profile name = Windows_SP2_and_below Mode 0 = Peripheral Device LUN Addressing Mode 1 = Legacy Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout selected initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Do not send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write Profile name = OpenVMS Mode 0 = Peripheral Device LUN Addressing Mode 1 = Asymmetric Failover Mode 2 = Logical volumes connect as unavailable on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = VMS shadow style bad block handling Mode 5 = Logout all initiators on TPRLO Mode 6 = Fault management events reported through Unit Attention Mode 7 = Do not send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write Profile name = Tru64 Mode 0 = Peripheral Device LUN Addressing Mode 1 = Asymmetric Failover Mode 2 = Logical volumes connect as unavailable on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout all initiators on TPRLO Mode 6 = Fault management events reported through Unit Attention Mode 7 = Do not send FCP response info with SCSI status Mode 8 = Send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write Profile name = Linux Mode 0 = Peripheral Device LUN Addressing Mode 1 = Asymmetric Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout all initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write Profile name = Solaris Mode 0 = Peripheral Device LUN Addressing Mode 1 = Asymmetric Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout all initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write Profile name = Netware Mode 0 = Peripheral Device LUN Addressing Mode 1 = Asymmetric Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout all initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write Profile name = HP Mode 0 = Volume Set Addressing Mode 1 = Asymmetric Failover Mode 2 = Logical volumes connect as available on Backup Controller Mode 3 = Product ID of 'MSA1000 VOLUME' Mode 4 = Normal bad block handling Mode 5 = Logout all initiators on TPRLO Mode 6 = Fault management events not reported through Unit Attention Mode 7 = Send FCP response info with SCSI status Mode 8 = Do not send Unit Attention on failover Mode 9 = SCSI inquiry revision field contains the actual version Mode 10 = SCSI inquiry vendor field contains Compaq Mode 11 = reserved Mode 12 = Enforce Force Unit Access on Write CLI> show globals Global Parameters: System Name: MSA318 Rebuild Priority: low Expand Priority: low Total Cache: 256MB 50% Read Cache: 128MB 50% Write Cache: 128MB Temperature: EMU: 29 Celsius, 84 Fahrenheit PS1: 37 Celsius, 98 Fahrenheit PS2: 40 Celsius, 104 Fahrenheit CLI> show acl ACL is enabled: Connection WWPN Units Server_SQL2-A 10000000-C93A4D6E 0, 1, 7, 8, 9, 10, 14, 15, 18, 20 Server_SQL1-B 10000000-C93A6C00 0, 1, 7, 8, 9, 10, 14, 15, 18, 20 Server_SQL1-A 10000000-C93A6E39 0, 1, 7, 8, 9, 10, 14, 15, 18, 20 Server_SQL2-B 10000000-C93A7001 0, 1, 7, 8, 9, 10, 14, 15, 18, 20 Server_FP1-B 10000000-C93A6BDC 2, 3, 11, 16, 19 Server_FP1-A 10000000-C93A6D30 2, 3, 11, 16, 19 Server_FP2-A 10000000-C93A4C4C 2, 3, 11, 16, 19 Server_FP2-B 10000000-C93A4FB2 2, 3, 11, 16, 19 Server_EROS-A 10000000-C93A4D04 4 Server_EROS-B 10000000-C93A6CBA 4 Server_APP1-A 10000000-C93A4D9F 5, 17 Server_APP1-B 10000000-C93A4E71 5, 17 Server_APP2-A 10000000-C93A4D3F 6 Server_APP2-B 10000000-C93A697D 6 Server_WEB01-227 10000000-C93A6DA8 12, 13 Server_ORACLE-318 210000E0-8B9DFB14 22 Server_WEB03-318 210000E0-8B1C8998 12, 13 Inaccessible Units: 21, 23 CLI> show connections Connection Name: Host WWNN = 20000000-C93F71F8 Host WWPN = 10000000-C93F71F8 Profile Name = Default Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_EROS-A Host WWNN = 20000000-C93A4D04 Host WWPN = 10000000-C93A4D04 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online s Connection Name: Server_SQL2-A Host WWNN = 20000000-C93A4D6E Host WWPN = 10000000-C93A4D6E Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Disk L ist: (box,bay) (bus,ID) Size Units Disk101 (1,01) (0,00) 146.8GB 0, 1, 12, 13, 14, 18 Disk102 (1,02) (0,01) 146.8GB 0, 1, 12, 13, 14, 18 Disk103 (1,03) (0,02) 146.8GB 9, 10, 15, 20 Disk104 (1,04) (0,03) 146.8GB 9, 10, 15, 20 Disk105 (1,05) (0,04) 146.8GB 2, 11 Disk106 (1,06) (0,05) 146.8GB 2, 11 Disk107 (1,07) (0,08) 146.8GB 3 Disk108 (1,08) (1,00) 146.8GB 3 Disk109 (1,09) (1,01) 146.8GB 4 Disk110 (1,10) (1,02) 146.8GB 4 Disk111 (1,11) (1,03) 146.8GB 5 Disk112 (1,12) (1,04) 146.8GB 5 Disk113 (1,13) (1,05) 146.8GB 6 Disk114 (1,14) (1,08) 146.8GB 6 Disk201 (2,01) (2,00) 146.8GB 7 Disk202 (2,02) (2,01) 146.8GB 7 Disk203 (2,03) (2,02) 146.8GB 8 Disk204 (2,04) (2,03) 146.8GB 8 Disk205 (2,05) (2,04) 146.8GB 16 Disk206 (2,06) (2,05) 146.8GB 16 Disk207 (2,07) (2,08) 146.8GB 17 Disk208 (2,08) (2,09) 146.8GB 17 Disk209 (2,09) (2,10) 146.8GB 19 Disk210 (2,10) (2,11) 146.8GB 19 Disk211 (2,11) (2,12) 146.8GB 21 Disk212 (2,12) (2,13) 146.8GB 21 Disk213 (2,13) (2,14) 146.8GB 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20 (spare) Disk214 (2,14) (2,15) 146.8GB 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20 (spare) Disk301 (3,01) (3,00) 146.8GB 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 (spare) Disk302 (3,02) (3,01) 146.8GB 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 (spare) Disk310 (3,10) (3,11) 300.0GB 23 Disk312 (3,12) (3,13) 300.0GB 22 Disk313 (3,13) (3,14) 300.0GB 22 Disk314 (3,14) (3,15) 300.0GB 22 (spare) Unit 0: In PDLA mode, Unit 0 is Lun 1; In VSA mode, Unit 0 is Lun 0. Unit Identifier : Device Identifier : 600805F3-000E1220-A3F65AF2-3403000B Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 0: Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0) Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1) Spare Disk(s) used by lun 0: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 199MB Unit 1: In PDLA mode, Unit 1 is Lun 2; In VSA mode, Unit 1 is Lun 1. Unit Identifier : Device Identifier : 600805F3-000E1220-A1364B00-24CD000C Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 1: Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0) Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1) Spare Disk(s) used by lun 1: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 25,647MB Unit 2: In PDLA mode, Unit 2 is Lun 3; In VSA mode, Unit 2 is Lun 2. Unit Identifier : Device Identifier : 600805F3-000E1220-A2C6A23D-AFE7000F Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 2: Disk105: Box 1, Bay 05, (SCSI bus 0, SCSI id 4) Disk106: Box 1, Bay 06, (SCSI bus 0, SCSI id 5) Spare Disk(s) used by lun 2: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 199MB Unit 3: In PDLA mode, Unit 3 is Lun 4; In VSA mode, Unit 3 is Lun 3. Unit Identifier : Device Identifier : 600805F3-000E1220-A4BD28BC-174E0005 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 3: Disk107: Box 1, Bay 07, (SCSI bus 0, SCSI id 8) Disk108: Box 1, Bay 08, (SCSI bus 1, SCSI id 0) Spare Disk(s) used by lun 3: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 4: In PDLA mode, Unit 4 is Lun 5; In VSA mode, Unit 4 is Lun 4. Unit Identifier : Device Identifier : 600805F3-000E1220-AD6D58CE-2A3C0006 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 4: Disk109: Box 1, Bay 09, (SCSI bus 1, SCSI id 1) Disk110: Box 1, Bay 10, (SCSI bus 1, SCSI id 2) Spare Disk(s) used by lun 4: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 5: In PDLA mode, Unit 5 is Lun 6; In VSA mode, Unit 5 is Lun 5. Unit Identifier : Device Identifier : 600805F3-000E1220-A65D48E1-CEDD0007 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 5: Disk111: Box 1, Bay 11, (SCSI bus 1, SCSI id 3) Disk112: Box 1, Bay 12, (SCSI bus 1, SCSI id 4) Spare Disk(s) used by lun 5: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 6: In PDLA mode, Unit 6 is Lun 7; In VSA mode, Unit 6 is Lun 6. Unit Identifier : Device Identifier : 600805F3-000E1220-AF0D78F4-F59E0008 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 6: Disk113: Box 1, Bay 13, (SCSI bus 1, SCSI id 5) Disk114: Box 1, Bay 14, (SCSI bus 1, SCSI id 8) Spare Disk(s) used by lun 6: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 7: In PDLA mode, Unit 7 is Lun 8; In VSA mode, Unit 7 is Lun 7. Unit Identifier : Device Identifier : 600805F3-000E1220-A9FD6901-BAB30009 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 7: Disk201: Box 2, Bay 01, (SCSI bus 2, SCSI id 0) Disk202: Box 2, Bay 02, (SCSI bus 2, SCSI id 1) Spare Disk(s) used by lun 7: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 8: In PDLA mode, Unit 8 is Lun 9; In VSA mode, Unit 8 is Lun 8. Unit Identifier : Device Identifier : 600805F3-000E1220-A2AD9918-B96F000A Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 8: Disk203: Box 2, Bay 03, (SCSI bus 2, SCSI id 2) Disk204: Box 2, Bay 04, (SCSI bus 2, SCSI id 3) Spare Disk(s) used by lun 8: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 9: In PDLA mode, Unit 9 is Lun 10; In VSA mode, Unit 9 is Lun 9. Unit Identifier : Device Identifier : 600805F3-000E1220-A076CB13-FBD4000D Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 9: Disk103: Box 1, Bay 03, (SCSI bus 0, SCSI id 2) Disk104: Box 1, Bay 04, (SCSI bus 0, SCSI id 3) Spare Disk(s) used by lun 9: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 25,647MB Unit 10: In PDLA mode, Unit 10 is Lun 11; In VSA mode, Unit 10 is Lun 10. Unit Identifier : Device Identifier : 600805F3-000E1220-AFB6FB23-EB08000E Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 10: Disk103: Box 1, Bay 03, (SCSI bus 0, SCSI id 2) Disk104: Box 1, Bay 04, (SCSI bus 0, SCSI id 3) Spare Disk(s) used by lun 10: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 25,647MB Unit 11: In PDLA mode, Unit 11 is Lun 12; In VSA mode, Unit 11 is Lun 11. Unit Identifier : Device Identifier : 600805F3-000E1220-A766324B-6CCB0010 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 11: Disk105: Box 1, Bay 05, (SCSI bus 0, SCSI id 4) Disk106: Box 1, Bay 06, (SCSI bus 0, SCSI id 5) Spare Disk(s) used by lun 11: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 139,811MB Unit 12: In PDLA mode, Unit 12 is Lun 13; In VSA mode, Unit 12 is Lun 12. Unit Identifier : Device Identifier : 600805F3-000E1220-A9AD7B56-B0B10013 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 12: Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0) Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1) Spare Disk(s) used by lun 12: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 199MB Unit 13: In PDLA mode, Unit 13 is Lun 14; In VSA mode, Unit 13 is Lun 13. Unit Identifier : Device Identifier : 600805F3-000E1220-ADCD6B6C-46580014 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 13: Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0) Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1) Spare Disk(s) used by lun 13: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 2,000MB Unit 14: In PDLA mode, Unit 14 is Lun 15; In VSA mode, Unit 14 is Lun 14. Unit Identifier : Device Identifier : 600805F3-000E1220-A4C6F9F7-36E60015 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 14: Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0) Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1) Spare Disk(s) used by lun 14: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 49,999MB Unit 15: In PDLA mode, Unit 15 is Lun 16; In VSA mode, Unit 15 is Lun 15. Unit Identifier : Device Identifier : 600805F3-000E1220-A1614BE8-1D650016 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 15: Disk103: Box 1, Bay 03, (SCSI bus 0, SCSI id 2) Disk104: Box 1, Bay 04, (SCSI bus 0, SCSI id 3) Spare Disk(s) used by lun 15: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 49,999MB Unit 16: In PDLA mode, Unit 16 is Lun 17; In VSA mode, Unit 16 is Lun 16. Unit Identifier : Device Identifier : 600805F3-000E1220-A998822F-85B40017 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 16: Disk205: Box 2, Bay 05, (SCSI bus 2, SCSI id 4) Disk206: Box 2, Bay 06, (SCSI bus 2, SCSI id 5) Spare Disk(s) used by lun 16: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 17: In PDLA mode, Unit 17 is Lun 18; In VSA mode, Unit 17 is Lun 17. Unit Identifier : Device Identifier : 600805F3-000E1220-AE6FC0D4-82710018 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 17: Disk207: Box 2, Bay 07, (SCSI bus 2, SCSI id 8) Disk208: Box 2, Bay 08, (SCSI bus 2, SCSI id 9) Spare Disk(s) used by lun 17: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 18: In PDLA mode, Unit 18 is Lun 19; In VSA mode, Unit 18 is Lun 18. Unit Identifier : Device Identifier : 600805F3-000E1220-A31E6DDC-49C80017 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 18: Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0) Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1) Spare Disk(s) used by lun 18: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 61,965MB Unit 19: In PDLA mode, Unit 19 is Lun 20; In VSA mode, Unit 19 is Lun 19. Unit Identifier : Device Identifier : 600805F3-000E1220-A16CBD55-360F0019 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 19: Disk209: Box 2, Bay 09, (SCSI bus 2, SCSI id 10) Disk210: Box 2, Bay 10, (SCSI bus 2, SCSI id 11) Spare Disk(s) used by lun 19: Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 20: In PDLA mode, Unit 20 is Lun 21; In VSA mode, Unit 20 is Lun 20. Unit Identifier : Device Identifier : 600805F3-000E1220-AF6CEC3C-2A6C001A Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 20: Disk103: Box 1, Bay 03, (SCSI bus 0, SCSI id 2) Disk104: Box 1, Bay 04, (SCSI bus 0, SCSI id 3) Spare Disk(s) used by lun 20: Disk213: Box 2, Bay 13, (SCSI bus 2, SCSI id 14) Disk214: Box 2, Bay 14, (SCSI bus 2, SCSI id 15) Disk301: Box 3, Bay 01, (SCSI bus 3, SCSI id 0) Disk302: Box 3, Bay 02, (SCSI bus 3, SCSI id 1) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 38,716MB Unit 21: In PDLA mode, Unit 21 is Lun 22; In VSA mode, Unit 21 is Lun 21. Unit Identifier : Device Identifier : 600805F3-000E1220-AEAE3BB6-86510018 Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: waiting for first write 2 Data Disk(s) used by lun 21: Disk211: Box 2, Bay 11, (SCSI bus 2, SCSI id 12) Disk212: Box 2, Bay 12, (SCSI bus 2, SCSI id 13) Spare Disk(s) used by lun 21: No spare drive is designated. Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 140,010MB Unit 22: In PDLA mode, Unit 22 is Lun 23; In VSA mode, Unit 22 is Lun 22. Unit Identifier : Device Identifier : 600805F3-000E1220-A0449863-0688001B Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK Mirror Init Status: Complete 2 Data Disk(s) used by lun 22: Disk312: Box 3, Bay 12, (SCSI bus 3, SCSI id 13) Disk313: Box 3, Bay 13, (SCSI bus 3, SCSI id 14) Spare Disk(s) used by lun 22: Disk314: Box 3, Bay 14, (SCSI bus 3, SCSI id 15) Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1) stripe_size=128kB Logical Volume Capacity : 286,101MB Unit 23: In PDLA mode, Unit 23 is Lun 24; In VSA mode, Unit 23 is Lun 23. Unit Identifier : Device Identifier : 600805F3-000E1220-A9A9882F-8072001C Cache Status : Enabled Max Boot Partition: Disabled Volume Status : VOLUME OK 1 Data Disk(s) used by lun 23: Disk310: Box 3, Bay 10, (SCSI bus 3, SCSI id 11) Spare Disk(s) used by lun 23: No spare drive is designated. Logical Volume Raid Level: NO FAULT TOLERANCE (Raid 0) stripe_size=128kB Logical Volume Capacity : 286,101MB Controller 1 Port 1 Status = Online Connection Name: Server_FP2-A Host WWNN = 20000000-C93A4C4C Host WWPN = 10000000-C93A4C4C Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online s Connection Name: Server_APP2-A Host WWNN = 20000000-C93A4D3F Host WWPN = 10000000-C93A4D3F Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online sCohntroller: MSA1000(c) Compaq P56350FX3Q00YR Software 4.32 Build 300 Hardware 7 Controller Identifier: NODE_ID = 500805F3-000E1220 SCSI_VERSION = SCSI-3 Supported Redundancy Mode: Active/Standby Current Redundancy Mode: Active/Standby Current Role: Standby Device Port SCSI address 7 Terminal speed for the CLI is set to 19200. Host Port_1: REPORTED PORT_ID 500805F3-000E1229 PORT_1_TOPOLOGY = F_Port Cache: 128 megabyte read cache 128 megabyte write cache Version 2 Cache is GOOD, and Cache is enabled. Unflushed data in cache Battery: Module #1 is fully charged and turned on. Controller 1 Port 1 Status = Online Connection Name: Server_FP1-B Host WWNN = 20000000-C93A6BDC Host WWPN = 10000000-C93A6BDC Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller: MSA1000(c) Compaq P56350FX3Q00WB Software 4.32 Build 300 Hardware 7 Controller Identifier: NODE_ID = 500805F3-000E1220 SCSI_VERSION = SCSI-3 Supported Redundancy Mode: Active/Standby Current Redundancy Mode: Active/Standby Current Role: Active Device Port SCSI address 6 Terminal speed for the CLI is set to 19200. Host Port_1: REPORTED PORT_ID 500805F3-000E1221 PORT_1_TOPOLOGY = F_Port Cache: 128 megabyte read cache 128 megabyte write cache Version 2 Cache is GOOD, and Cache is enabled. No unflushed data in cache Battery: Module #1 is fully charged and turned off. Controller 1 Port 1 Status = Online Connection Name: Server_SQL1-B Host WWNN = 20000000-C93A6C00 Host WWPN = 10000000-C93A6C00 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP1-B Host WWNN = 20000000-C93A4E71 Host WWPN = 10000000-C93A4E71 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_SQL1-A Host WWNN = 20000000-C93A6E39 Host WWPN = 10000000-C93A6E39 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_FP1-A Host WWNN = 20000000-C93A6D30 Host WWPN = 10000000-C93A6D30 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_FP2-B Host WWNN = 20000000-C93A4FB2 Host WWPN = 10000000-C93A4FB2 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_SQL2-B Host WWNN = 20000000-C93A7001 Host WWPN = 10000000-C93A7001 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_EROS-B Host WWNN = 20000000-C93A6CBA Host WWPN = 10000000-C93A6CBA Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP1-A Host WWNN = 20000000-C93A4D9F Host WWPN = 10000000-C93A4D9F Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_WEB01-227 Host WWNN = 20000000-C93A6DA8 Host WWPN = 10000000-C93A6DA8 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP2-B Host WWNN = 20000000-C93A697D Host WWPN = 10000000-C93A697D Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_WEB03-318 Host WWNN = 200000E0-8B1C8998 Host WWPN = 210000E0-8B1C8998 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_ORACLE-318 Host WWNN = 200000E0-8B9DFB14 Host WWPN = 210000E0-8B9DFB14 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_WEB02-318 Host WWNN = 200000E0-8B1CA998 Host WWPN = 210000E0-8B1CA998 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online CLI> shw c   ow connections Connection Name: Host WWNN = 20000000-C93F71F8 Host WWPN = 10000000-C93F71F8 Profile Name = Default Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_EROS-A Host WWNN = 20000000-C93A4D04 Host WWPN = 10000000-C93A4D04 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_SQL2-A Host WWNN = 20000000-C93A4D6E Host WWPN = 10000000-C93A4D6E Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_FP2-A Host WWNN = 20000000-C93A4C4C Host WWPN = 10000000-C93A4C4C Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP2-A Host WWNN = 20000000-C93A4D3F Host WWPN = 10000000-C93A4D3F Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_FP1-B Host WWNN = 20000000-C93A6BDC Host WWPN = 10000000-C93A6BDC Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_SQL1-B Host WWNN = 20000000-C93A6C00 Host WWPN = 10000000-C93A6C00 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP1-B Host WWNN = 20000000-C93A4E71 Host WWPN = 10000000-C93A4E71 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_SQL1-A Host WWNN = 20000000-C93A6E39 Host WWPN = 10000000-C93A6E39 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_FP1-A Host WWNN = 20000000-C93A6D30 Host WWPN = 10000000-C93A6D30 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_FP2-B Host WWNN = 20000000-C93A4FB2 Host WWPN = 10000000-C93A4FB2 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_SQL2-B Host WWNN = 20000000-C93A7001 Host WWPN = 10000000-C93A7001 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_EROS-B Host WWNN = 20000000-C93A6CBA Host WWPN = 10000000-C93A6CBA Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP1-A Host WWNN = 20000000-C93A4D9F Host WWPN = 10000000-C93A4D9F Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_WEB01-227 Host WWNN = 20000000-C93A6DA8 Host WWPN = 10000000-C93A6DA8 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_APP2-B Host WWNN = 20000000-C93A697D Host WWPN = 10000000-C93A697D Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_WEB03-318 Host WWNN = 200000E0-8B1C8998 Host WWPN = 210000E0-8B1C8998 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_ORACLE-318 Host WWNN = 200000E0-8B9DFB14 Host WWPN = 210000E0-8B9DFB14 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online Connection Name: Server_WEB02-318 Host WWNN = 200000E0-8B1CA998 Host WWPN = 210000E0-8B1CA998 Profile Name = Windows_SP2_and_below Unit Offset = 0 Controller 2 Port 1 Status = Online Controller 1 Port 1 Status = Online show connections                show acl        show globals            show profile            show version            show tech_support                 show connections                show acl        show globals            show profile            show connections                show acl        show globals            show profile            show version            show tech_support                 show connections                show acl        show globals            show profile            show connections