******************************************************************************************
 WARNING!  The correct parse file could not be found.  The default file is being used.
 This could result in an incorrect parsing of data of this event.
 Please locate the correct parse file for the current firmware version and upload it
 using the Send Parse File button on the Controller Event page.
 The correct parse file is: : HSV200_event_CR0ECA_6110.txt
 It should be installed in the directory: C:\Program Files (x86)\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV\events\
******************************************************************************************


Event header details:
Event sequence number: 711615
Flags: Time_set 
Event rev: 2
Event size: 180
Software version: 6110
Base level: CR0ECA      
Ctlr model: HSV200  
Ctlr handle: 0000-7-8-500508B4-000905AB-00000000-00000000
Report time: 12 May, 2014 17:09:54.958772
Location: 0x002E2C34
Event code: Type: 05 Cac: C3 Num: CD Scid: 09
Event description: 0x09CDC305 Severity: Undetermined -- more information needed to determine severity. A Fibre Channel port has transitioned to the FAILED state.
Information packet rev: 04
Information packet type: 05
Information packet size: 0074
Software component: Storage System Management Interface
Corrective action: Evaluate previously reported Device, Device Enclosure, and Host events to determine root cause and corrective action. If the problem persists, follow Corrective Action [[20]].

Event structure details:
Information packet descriptor:
EIP05 - Storage System Management Interface Entity State Change
The state of a Storage System Management Interface entity has changed.
Structure: Event
  Structure: flags
    time_set: TRUE - Time has been set on this HSV200 controller
    time_synched: FALSE - Time has been synchronized with all HSV200 controllers in the Storage System
    seq_reset: FALSE - Event sequence number reset occurred
    outofsequence: FALSE - Event reported out of sequence due to Final Event Block reconciliation or lost host event
    requeued: FALSE - Event requeued following restart or resynchronization
    labcode: FALSE - Event reported using LAB code
    prictrlr: FALSE - Event reported by primary HSV200 controller (Note: Not valid until Storage System primary HSV200 controller is elected)
    spsctrlr: FALSE - Single power supply HSV200 controller
  End of structure
  revision: 2 [0x02] - Structure revision number
  count: 180 [0x00B4] - Event specific information size in bytes
  sequence_number: 711615 [0x000ADBBF] - Sequence number assigned to the event
  sw_version: 6110 - HSV200 controller software version number string
  baselevel_id: CR0ECA       - HSV200 controller baselevel build string
  ctrlr_model_id: HSV200   - HSV200 controller model string
  reporting_ctrlr: 0000-7-8-500508B4-000905AB-00000000-00000000 - Storage System Management Interface Handle of HSV200 controller that reported the event
  report_time: 12 May, 2014 17:09:54.958772 - Time event was reported
  report_location: 3025972 [0x002E2C34] - Location of event report call
  Structure: header
    Union: u
      Structure: ec
        eiptype: 5 [0x05] - Event Information Packet Type Code
        cac: 195 [0xC3] - Corrective Action Code
        evnum: 205 [0xCD] - Event Number
        scid: 9 [0x09] - HSV200 Controller Software Component Identification
      End of structure
    End of union section
      value: 164479749 [0x09CDC305] - Event Code Value
    End of union
    End of union
    revision: 4 [0x04] - Packet revision number
    type: 5 [0x05] - Packet type
    count: 116 [0x0074] - Number of bytes in packet
  End of structure
  Structure: event_type
    scmi_object_type: 5 [0x0005] - Entity type
    scmi_object_event_type: 7 [0x0007] - Event Information Packet type
  End of structure
  Structure: value
    ul1: 2 [0x00000002] - Additional information longword 1
    ul2: 1 [0x00000001] - Additional information longword 2
  End of structure
  handle: 0000-7-8-500508B4-000905AB-00000000-00000000 - Storage System Management Interface Handle of affected entity
  secondary_id: 2 [0x00000002] - Alternate entity identification
  Structure: attribute
    type: 4 [0x00000004] - Datatype used
    Union: value
      u16: 20557 [0x504D] - As 16 bit words,
    End of union section
      u32: 3231821 [0x0031504D]0 [0x00000000]0 [0x00000000]0 [0x00000000]0 [0x00000000]0 [0x00000000] - As 32 bit words,
    End of union section
      u64: 3231821 [0x000000000031504D] - As 64 bit words,
    End of union section
      Structure: obj
        value: 3231821 [0x0031504D] - 
        handle: 0000-0-0-00000000-00000000-00000000-00000000 - 
      End of structure
    End of union section
      str: MP1                      - As character string
    End of union
    End of union
  End of structure
  add_handle: 0000-0-0-00000000-00000000-00000000-00000000 - Additional entity identification (Storage System Management Interface Handle)
  add_data: 1024 [0x00000400]0 [0x00000000]0 [0x00000000]0 [0x00000000]0 [0x00000000]0 [0x00000000] - Additional Data
End of structure

Salient data:
Event: Severity: Undetermined -- more information needed to determine severity. A Fibre Channel port has transitioned to the FAILED state.
Action: Evaluate previously reported Device, Device Enclosure, and Host events to determine root cause and corrective action. If the problem persists, follow Corrective Action [[20]].