*** RHEL4 update 2 console log ***

Booting 'Red Hat Enterprise Linux AS (2.6.9-22.ELhugemem)'root (hd0,0) Filesystem type is ext2fs, partition type 0x83kernel /boot/vmlinuz-2.6.9-22.ELhugemem ro root=LABEL=/ console=ttyS0,9600 console=tty0   [Linux-bzImage, setup=0x1400, size=0x156a18]initrd /boot/initrd-2.6.9-22.ELhugemem.img   [Linux-initrd @ 0x37f43000, 0xacf12 bytes]Linux version 2.6.9-22.ELhugemem (bhcompile@porky.build.redhat.com) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:43:10 EDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfeda540 (usable)
 BIOS-e820: 00000000dfeda540 - 00000000dfeeb144 (ACPI data)
 BIOS-e820: 00000000dfeeb144 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000061ffff000 (usable)
21151MB HIGHMEM available.
3936MB LOWMEM available.
found SMP MP-table at 000f4fa0
NX (Execute Disable) protection: active
DMI 2.3 present.
Using APIC driver default
ACPI: PM-Timer IO Port: 0x908
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
Processor #14 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
Processor #8 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
Processor #15 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
Processor #9 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Enabling APIC mode:  Flat.  Using 0 I/O APICs
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1 already used, trying 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 2 already used, trying 3
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec80800] gsi_base[48])
IOAPIC[2]: apic_id 3 already used, trying 4
IOAPIC[2]: apic_id 4, version 32, address 0xfec80800, GSI 48-71
ACPI: IOAPIC (id[0x06] address[0xfec83000] gsi_base[72])
IOAPIC[3]: apic_id 6 already used, trying 5
IOAPIC[3]: apic_id 5, version 32, address 0xfec83000, GSI 72-95
ACPI: IOAPIC (id[0x07] address[0xfec83800] gsi_base[96])
IOAPIC[4]: apic_id 7 already used, trying 10
IOAPIC[4]: apic_id 10, version 32, address 0xfec83800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS0,9600 console=tty0
mapped 4G/4G trampoline to fffec000.
Initializing CPU#0
CPU 0 irqstacks, hard=023df000 soft=023bf000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3335.225 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Memory: 24953628k/25690108k available (1832k kernel code, 210008k reserved, 752k data, 176k init, 21495804k highmem)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
per-CPU timeslice cutoff: 2925.86 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=023e0000 soft=023c0000
Initializing CPU#1
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU1: Initial APIC ID: 1, Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=023e1000 soft=023c1000
Initializing CPU#2
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU2: Initial APIC ID: 6, Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=023e2000 soft=023c2000
Initializing CPU#3
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU3: Initial APIC ID: 7, Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 4/8 eip 3000
CPU 4 irqstacks, hard=023e3000 soft=023c3000
Initializing CPU#4
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU4: Initial APIC ID: 8, Physical Processor ID: 4
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
CPU4: Thermal monitoring enabled
CPU4: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 5/9 eip 3000
CPU 5 irqstacks, hard=023e4000 soft=023c4000
Initializing CPU#5
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU5: Initial APIC ID: 9, Physical Processor ID: 4
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
CPU5: Thermal monitoring enabled
CPU5: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 6/14 eip 3000
CPU 6 irqstacks, hard=023e5000 soft=023c5000
Initializing CPU#6
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU6: Initial APIC ID: 14, Physical Processor ID: 7
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
CPU6: Thermal monitoring enabled
CPU6: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 7/15 eip 3000
CPU 7 irqstacks, hard=023e6000 soft=023c6000
Initializing CPU#7
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU7: Initial APIC ID: 15, Physical Processor ID: 7
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
CPU7: Thermal monitoring enabled
CPU7: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Total of 8 processors activated (53116.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 691k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0096, last bus=32
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:03:01.1[B] -> GSI 25 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 48 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:17:04.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:0c:01.0[A] -> GSI 74 (level, low) -> IRQ 225
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 233
ACPI: PCI interrupt 0000:01:02.2[B] -> GSI 22 (level, low) -> IRQ 50
PCI: Device 00:00 not found by BIOS
PCI: Failed to allocate mem resource #0:2000@0 for 0000:04:01.0
PCI: Failed to allocate I/O resource #2:100@0 for 0000:04:01.0
PCI: Failed to allocate mem resource #3:40000@0 for 0000:04:01.0
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1144766567.557:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 975E6FA84E049D8A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU6] (supports C1)
ACPI: Processor [CPU7] (supports C1)
ACPI: Processor [CPU8] (supports C1)
ACPI: Processor [CPU9] (supports C1)
ACPI: Processor [CPUE] (supports C1)
ACPI: Processor [CPUF] (supports C1)
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
˙ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
hdb: DV-28E-N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 131072 buckets, 2048Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU1 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU2 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU3 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU4 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU5 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU6 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU7 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
ACPI: (supports S0 S4 S5)
ACPI wakeup devices: 

Freeing unused kernel memory: 176k freed
SCSI subsystem initialized
HP CISS Driver (v 2.6.8)
cciss: controller appears to be disabled
cciss: probe of 0000:04:01.0 failed with error -1
ACPI: PCI interrupt 0000:17:04.0[A] -> GSI 18 (level, low) -> IRQ 185
cciss: using DAC cycles
      blocks= 573472305 block_size= 512
      heads= 255, sectors= 63, cylinders= 35697

 cciss/c0d0: p1 p2
qla2xxx: Unknown parameter `ql2xfailover'
QLogic Fibre Channel HBA Driver
ACPI: PCI interrupt 0000:0c:01.0[A] -> GSI 74 (level, low) -> IRQ 225
qla2300 0000:0c:01.0: Found an ISP2312, irq 225, iobase 0xf883c000
qla2300 0000:0c:01.0: Configuring PCI space...
qla2300 0000:0c:01.0: Configure NVRAM parameters...
qla2300 0000:0c:01.0: Verifying loaded RISC code...
qla2300 0000:0c:01.0: LIP reset occured (f7f7).
qla2300 0000:0c:01.0: Waiting for LIP to complete...
qla2300 0000:0c:01.0: LOOP UP detected (2 Gbps).
qla2300 0000:0c:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi0 : qla2xxx
qla2300 0000:0c:01.0: 
 QLogic Fibre Channel HBA Driver: 8.01.00b5-rh2
  QLogic QLA2340 - 
  ISP2312: PCI-X (133 MHz) @ 0000:0c:01.0 hdma+, host#=0, fw=3.03.15 IPX
scsi: unknown device type 12
  Vendor: COMPAQ    Model: MSA1000           Rev: 4.32
  Type:   RAID                               ANSI SCSI revision: 04
qla2300 0000:0c:01.0: scsi(0:0:0:0): Enabled tagged queuing, queue depth 16.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks

*** RHEL4 update 3 console log ***

ProLiant System BIOS - P38 (02/09/2006)Copyright 1982, 2006 Hewlett-Packard Development Company, L.P. 24576 MB AvailableProcessor 1 initialized at 3.33 GHz/667 MHz(1MB L2,8MB L3)Processor 2 initialized at 3.33 GHz/667 MHz(1MB L2,8MB L3)Processor 3 initialized at 3.33 GHz/667 MHz(1MB L2,8MB L3)Processor 4 initialized at 3.33 GHz/667 MHz(1MB L2,8MB L3)Redundant ROM Detected - This system contains a valid backup system ROM.Advanced Memory Protection Mode: RAID Memory with Advanced ECC24.0 GB System memory and 8.0 GB memory reserved for RAID.Integrated Lights-Out Advanced press [F8] to configure                           1.64 Nov 11 2004 192.168.89.40QLogic CorporationQLA2312 PCI Fibre Channel ROM BIOS Version 1.34      Subsystem Vendor ID 0E11Copyright (C) QLogic Corporation 1993-2003. All rights reserved.www.qlogic.comPress <CTRL-Q> for Fast!UTILBIOS for Adapter 0 is disabledROM BIOS NOT INSTALLEDSlot 7                                                            HP Smart Array 6400 Controller                        Initializing...  \|/-\|/-\|/-\|                               (320MB, v2.58)   1 Logical DrivePress <F8> to run the Option ROM Configuration for Arrays Utility           Press <ESC> to skip configuration and continue                              

Booting 'Red Hat Enterprise Linux AS (2.6.9-34.ELhugemem)'root (hd0,0) Filesystem type is ext2fs, partition type 0x83kernel /boot/vmlinuz-2.6.9-34.ELhugemem ro root=LABEL=/ console=ttyS0,9600 console=tty0   [Linux-bzImage, setup=0x1400, size=0x158b0a]initrd /boot/initrd-2.6.9-34.ELhugemem.img   [Linux-initrd @ 0x37f41000, 0xae3c8 bytes]Linux version 2.6.9-34.ELhugemem (bhcompile@hs20-bc1-7.build.redhat.com) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Fri Feb 24 17:04:34 EST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfeda540 (usable)
 BIOS-e820: 00000000dfeda540 - 00000000dfeeb144 (ACPI data)
 BIOS-e820: 00000000dfeeb144 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000061ffff000 (usable)
21151MB HIGHMEM available.
3936MB LOWMEM available.
found SMP MP-table at 000f4fa0
NX (Execute Disable) protection: active
DMI 2.3 present.
Using APIC driver default
ACPI: PM-Timer IO Port: 0x908
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
Processor #14 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
Processor #8 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
Processor #15 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
Processor #9 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Enabling APIC mode:  Flat.  Using 0 I/O APICs
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec80800] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec80800, GSI 48-71
ACPI: IOAPIC (id[0x06] address[0xfec83000] gsi_base[72])
IOAPIC[3]: apic_id 6, version 32, address 0xfec83000, GSI 72-95
ACPI: IOAPIC (id[0x07] address[0xfec83800] gsi_base[96])
IOAPIC[4]: apic_id 7, version 32, address 0xfec83800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS0,9600 console=tty0
mapped 4G/4G trampoline to fffec000.
Initializing CPU#0
CPU 0 irqstacks, hard=023e2000 soft=023c2000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3335.769 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Memory: 24953612k/25690108k available (1840k kernel code, 210032k reserved, 752k data, 180k init, 21495804k highmem)
Calibrating delay using timer specific routine.. 6675.62 BogoMIPS (lpj=3337814)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
per-CPU timeslice cutoff: 2925.86 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=023e3000 soft=023c3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6666.20 BogoMIPS (lpj=3333104)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU1: Initial APIC ID: 1, Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=023e4000 soft=023c4000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6666.17 BogoMIPS (lpj=3333087)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU2: Initial APIC ID: 6, Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=023e5000 soft=023c5000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6666.40 BogoMIPS (lpj=3333204)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU3: Initial APIC ID: 7, Physical Processor ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 4/8 eip 3000
CPU 4 irqstacks, hard=023e6000 soft=023c6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 6666.47 BogoMIPS (lpj=3333239)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU4: Initial APIC ID: 8, Physical Processor ID: 4
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
CPU4: Thermal monitoring enabled
CPU4: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 5/9 eip 3000
CPU 5 irqstacks, hard=023e7000 soft=023c7000
Initializing CPU#5
Calibrating delay using timer specific routine.. 6666.41 BogoMIPS (lpj=3333208)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU5: Initial APIC ID: 9, Physical Processor ID: 4
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
CPU5: Thermal monitoring enabled
CPU5: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 6/14 eip 3000
CPU 6 irqstacks, hard=023e8000 soft=023c8000
Initializing CPU#6
Calibrating delay using timer specific routine.. 6666.49 BogoMIPS (lpj=3333246)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU6: Initial APIC ID: 14, Physical Processor ID: 7
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
CPU6: Thermal monitoring enabled
CPU6: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Booting processor 7/15 eip 3000
CPU 7 irqstacks, hard=023e9000 soft=023c9000
Initializing CPU#7
Calibrating delay using timer specific routine.. 6666.38 BogoMIPS (lpj=3333194)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU7: Initial APIC ID: 15, Physical Processor ID: 7
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
CPU7: Thermal monitoring enabled
CPU7: Intel(R) Xeon(TM) MP CPU 3.33GHz stepping 01
Total of 8 processors activated (53340.19 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 696k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0096, last bus=32
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:03:01.1[B] -> GSI 25 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 48 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:17:04.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:0c:01.0[A] -> GSI 74 (level, low) -> IRQ 225
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 233
ACPI: PCI interrupt 0000:01:02.2[B] -> GSI 22 (level, low) -> IRQ 50
PCI: Device 00:00 not found by BIOS
PCI: Failed to allocate mem resource #0:2000@0 for 0000:04:01.0
PCI: Failed to allocate I/O resource #2:100@0 for 0000:04:01.0
PCI: Failed to allocate mem resource #3:40000@0 for 0000:04:01.0
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1144765630.130:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 63EFDF11AD6BAA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU6] (supports C1)
ACPI: Processor [CPU7] (supports C1)
ACPI: Processor [CPU8] (supports C1)
ACPI: Processor [CPU9] (supports C1)
ACPI: Processor [CPUE] (supports C1)
ACPI: Processor [CPUF] (supports C1)
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
˙ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
hdb: DV-28E-N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 131072 buckets, 2048Kbytes
TCP: Hash tables configured (established 262144 bind 43690)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU1 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU2 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU3 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU4 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU5 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU6 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
cpufreq: CPU7 - ACPI performance management activated.
cpufreq: *P0: 3335 MHz, 115000 mW, 100 uS
cpufreq:  P1: 3001 MHz, 101516 mW, 100 uS
cpufreq:  P2: 2668 MHz, 89116 mW, 100 uS
cpufreq:  P3: 2334 MHz, 79334 mW, 100 uS
ACPI: (supports S0 S4 S5)
ACPI wakeup devices: 

Freeing unused kernel memory: 180k freed
SCSI subsystem initialized
HP CISS Driver (v 2.6.10)
cciss: controller appears to be disabled
Unable to handle kernel NULL pointer dereference at virtual address 00000370
 printing eip:
f8875f12
*pde = 00004001
Oops: 0002 [#1]
SMP 
Modules linked in: cciss sd_mod scsi_mod
CPU:    2
EIP:    0060:[<f8875f12>]    Not tainted VLI
EFLAGS: 00010286   (2.6.9-34.ELhugemem) 
EIP is at cciss_init_one+0x506/0x51b [cciss]
eax: 00000000   ebx: e1cb8400   ecx: e1ed9a80   edx: 03000000
esi: f887d7c0   edi: ffffffed   ebp: 00000000   esp: e1532f20
ds: 007b   es: 007b   ss: 0068
Process insmod (pid: 310, threadinfo=e1532000 task=e157d8b0)
Stack: 0216d46c e1532f50 e1cb8400 e1cb8400 f887d7c0 ffffffed 00000000 021c5859 
       e1cb8400 f887d7c0 ffffffed 021c5887 f887d7c0 e1cb8400 021c58b3 f887d7e4 
       e1cb8444 0221a274 e1cb844c 0232c2e0 f887d7e4 0221a33d 0232c32c 0232c2e0 
Call Trace:
 [<0216d46c>] dput+0x34/0x1a7
 [<021c5859>] pci_device_probe_static+0x2a/0x3d
 [<021c5887>] __pci_device_probe+0x1b/0x2c
 [<021c58b3>] pci_device_probe+0x1b/0x2d
 [<0221a274>] bus_match+0x27/0x45
 [<0221a33d>] driver_attach+0x37/0x66
 [<0221a6fb>] bus_add_driver+0x78/0x99
 [<021c5a5a>] pci_register_driver+0x6e/0x8a
 [<f882e015>] cciss_init+0x15/0x20 [cciss]
 [<02136e00>] sys_init_module+0xf8/0x21a
Code: <3>Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
in_atomic():0[expected: 0], irqs_disabled():1
 [<0211ffc0>] __might_sleep+0x7d/0x89
 [<02154934>] rw_vm+0xe4/0x29c
 [<f8875ee7>] cciss_init_one+0x4db/0x51b [cciss]
 [<f8875ee7>] cciss_init_one+0x4db/0x51b [cciss]
 [<02154dab>] get_user_size+0x30/0x57
 [<f8875ee7>] cciss_init_one+0x4db/0x51b [cciss]
 [<021061ab>] show_registers+0x115/0x16c
 [<02106342>] die+0xdb/0x16b
 [<021227cc>] vprintk+0x136/0x14a
 [<0211acf9>] do_page_fault+0x0/0x5f7
 [<0211b11a>] do_page_fault+0x421/0x5f7
 [<f8875f12>] cciss_init_one+0x506/0x51b [cciss]
 [<02117444>] smp_apic_timer_interrupt+0x9a/0x9c
 [<022168f9>] serial_in+0x45/0x4a
 [<021bf82d>] __delay+0x9/0xa
 [<02218841>] serial8250_console_write+0x16c/0x1b2
 [<022186d5>] serial8250_console_write+0x0/0x1b2
 [<021bf94a>] memmove+0xe/0x24
 [<0211acf9>] do_page_fault+0x0/0x5f7
 [<f8875f12>] cciss_init_one+0x506/0x51b [cciss]
 [<0216d46c>] dput+0x34/0x1a7
 [<021c5859>] pci_device_probe_static+0x2a/0x3d
 [<021c5887>] __pci_device_probe+0x1b/0x2c
 [<021c58b3>] pci_device_probe+0x1b/0x2d
 [<0221a274>] bus_match+0x27/0x45
 [<0221a33d>] driver_attach+0x37/0x66
 [<0221a6fb>] bus_add_driver+0x78/0x99
 [<021c5a5a>] pci_register_driver+0x6e/0x8a
 [<f882e015>] cciss_init+0x15/0x20 [cciss]
 [<02136e00>] sys_init_module+0xf8/0x21a
Debug: sleeping function called from invalid context at kernel/sched.c:3660
in_atomic():0[expected: 0], irqs_disabled():1
 [<0211ffc0>] __might_sleep+0x7d/0x89
 [<022c8af5>] __cond_resched+0x14/0x39
 [<02154939>] rw_vm+0xe9/0x29c
 [<f8875ee7>] cciss_init_one+0x4db/0x51b [cciss]
 [<f8875ee7>] cciss_init_one+0x4db/0x51b [cciss]
 [<02154dab>] get_user_size+0x30/0x57
 [<f8875ee7>] cciss_init_one+0x4db/0x51b [cciss]
 [<021061ab>] show_registers+0x115/0x16c
 [<02106342>] die+0xdb/0x16b
 [<021227cc>] vprintk+0x136/0x14a
 [<0211acf9>] do_page_fault+0x0/0x5f7
 [<0211b11a>] do_page_fault+0x421/0x5f7
 [<f8875f12>] cciss_init_one+0x506/0x51b [cciss]
 [<02117444>] smp_apic_timer_interrupt+0x9a/0x9c
 [<022168f9>] serial_in+0x45/0x4a
 [<021bf82d>] __delay+0x9/0xa
 [<02218841>] serial8250_console_write+0x16c/0x1b2
 [<022186d5>] serial8250_console_write+0x0/0x1b2
 [<021bf94a>] memmove+0xe/0x24
 [<0211acf9>] do_page_fault+0x0/0x5f7
 [<f8875f12>] cciss_init_one+0x506/0x51b [cciss]
 [<0216d46c>] dput+0x34/0x1a7
 [<021c5859>] pci_device_probe_static+0x2a/0x3d
 [<021c5887>] __pci_device_probe+0x1b/0x2c
 [<021c58b3>] pci_device_probe+0x1b/0x2d
 [<0221a274>] bus_match+0x27/0x45
 [<0221a33d>] driver_attach+0x37/0x66
 [<0221a6fb>] bus_add_driver+0x78/0x99
 [<021c5a5a>] pci_register_driver+0x6e/0x8a
 [<f882e015>] cciss_init+0x15/0x20 [cciss]
 [<02136e00>] sys_init_module+0xf8/0x21a
 Bad EIP value.
 <0>Fatal exception: panic in 5 seconds
Kernel panic - not syncing: Fatal exception