HP ProLiant ML370 G3 - Jumpers and Switches

 

SW1 - System Maintenance Switch Settings

The system maintenance switch (SW1) is a six-position switch that is used for system configuration. The default setting for all six positions is off. For the proper system maintenance switch settings, refer to the labels attached to the inside of the server access panel or see the following table.

 

Position

Description

On/Off Function

1

iLO Security enable indicator

Off = iLO security enabled.

On = iLO security disabled

2

Configuration lock.

Off = System configuration can be changed.

On = System configuration is locked and cannot be modified.

3

Rack mount indicator

Off = System is in a tower configuration.

On = System is in a rack-mounted configuration.

4

Enable diskette boot

Off = Booting from diskette is controlled by RBSU.

On = Booting from diskette is enabled and RBSU setting is overridden.

5

Password disable

Off = Power-on password works normally.

On = Power-on password is disabled.

6

Invalidate configuration

Off = No function is available.

On = ROM treats system configuration as invalid.

 

SW2 - System Identification Switch Settings

The system identification switch (SW2) is a three-position switch that identifies the operational configuration of the server. This switch is set to the correct configuration for the server by default. The following table shows the switch settings and positions.

Switch Position

Function

Default Settings

1

ID0

Off

2

ID1

Off

3

ID2

Off