These is a possible SNMP configuration: 


type:  

# hpsnmpconfig 


 Do you wish to continue?

YES

 Press any key to continue

 Do you want to load the hp modules even though they may "taint" your kernell Y/N ?   

Y 

 This is optional, unrelated to the problem.  They will not be able to use the iLO driver as that will taint their kernel.  Tainting the kernel may cause issues with S/W support.  

 Do you require SNMP agents Y/N ? 

YES 

 Do you require Storage Agent support Y/N ? 

YES 

 Do you require performance agent support Y/N ? 

YES  

 Do you wish to use an existing snmp.conf

NO 

 Locanhost SNMP Read/Write community strings are already known. Do you wish to change it (Y/N) ?  

YES  


Enter the localhost SNMP read/write community string 

 PRIVATE   

 Re-enter the same input to confirm

 PRIVATE  

 Localhost SNMP Read Only community strings are already known. Do you wish to change it (Y/N) ?  

 YES

 Enter the localhost SNMP Read Only community string 

 PUBLIC 

Re-enter the same input to confirm

 PUBLIC    

 SNMP Read/Write community strings are already set to rwcommunity n n. Do you wish to change them (Y/N) ?  


YES


Enter Read/Write Autorized Management Station IP or DNS name 

127.0.0.1  or localhost  

Enter SNMP Read/Write community string for Management Station 

 xxx 


Re-enter the same input to confirm 

 xxx   

Enter Read Only Autorized Management Station IP or DNS name 

127.0.0.1 or localhost  

Enter SNMP Read Only community string for Management Station

 xxx 


Re-enter the same input to confirm


 xxx   


Enter default SNMP trap community string 

 xxx 


Enter SNMP trap destination IP or DNS name

127.0.0.1 - they can add a SIM server(s) if they want as well  

 Enter trap community string for trap destination 127.0.0.1


PUBLIC


Enter the syscontact and the syslocation


Do you wish to to disable hpshm support

 NO

#service hp-snmp-agents restart (version 8.1 and later)