root@everest /fstore1/EGS-PANO # mptutil /dev/mpt2 ****************************************************************************** **** **** **** M P T U T I L S u p p o r t T o o l **** **** **** **** for Ultra320 SCSI Controller **** **** **** **** Version 1.04 : Feb 25 2007 **** **** **** **** (C) Copyright 2003-2005 Hewlett-Packard Development Company, L.P. **** **** **** ****************************************************************************** ---- ADAPTER INFORMATION ----------------------------------------------------- Device File : /dev/mpt2 Hardware Path : 0/1/1/0 Driver Version : r11.23/1.04 ---- CHIP INFORMATION -------------------------------------------------------- Device ID : 0x0030 Vendor ID : 0x1000 Revision ID : 0x8 Subsystem ID : 0x1324 Subsystem Vendor ID : 0x103c IOC Number : 0 Max. Devices : 16 Number of channels : 2 Driver State : OPERATIONAL ---- FIRMWARE INFORMATION ---------------------------------------------------- SCSI Firmware Version : 1.03.35.65 IO SCSI Firmware Version (Hex) : 1.03.23.41 IO SCSI Firmware Size : 39968 EFI Driver Version : 1.04.02.00 ---- V P D I N F O R M A T I O N ------------------------------------------- No VPD data on card. root@everest /fstore1/EGS-PANO # mptutil /dev/mpt3 ****************************************************************************** **** **** **** M P T U T I L S u p p o r t T o o l **** **** **** **** for Ultra320 SCSI Controller **** **** **** **** Version 1.04 : Feb 25 2007 **** **** **** **** (C) Copyright 2003-2005 Hewlett-Packard Development Company, L.P. **** **** **** ****************************************************************************** ---- ADAPTER INFORMATION ----------------------------------------------------- Device File : /dev/mpt3 Hardware Path : 0/1/1/1 Driver Version : r11.23/1.04 ---- CHIP INFORMATION -------------------------------------------------------- Device ID : 0x0030 Vendor ID : 0x1000 Revision ID : 0x8 Subsystem ID : 0x1324 Subsystem Vendor ID : 0x103c IOC Number : 1 Max. Devices : 16 Number of channels : 2 Driver State : OPERATIONAL ---- FIRMWARE INFORMATION ---------------------------------------------------- SCSI Firmware Version : 1.03.35.65 IO SCSI Firmware Version (Hex) : 1.03.23.41 IO SCSI Firmware Size : 39968 EFI Driver Version : 1.04.02.00 ---- V P D I N F O R M A T I O N ------------------------------------------- No VPD data on card. root@everest /fstore1/EGS-PANO # msv2v3check ======= STARTING at Wed Jul 25 16:47:44 EETDST 2007 ON everest WARNING: The Ultra320 SCSI MPT card at H/W path 0/1/1/0 (/dev/mpt2) is not running the minimum required firmware version. Please upgrade to version 1.03.35.69 or later before installing HP-UX 11i v3. Please check the mptutil(1M) man page for more information on upgrading the firmware on your Ultra320 SCSI cards. WARNING: The Ultra320 SCSI MPT card at H/W path 0/1/1/1 (/dev/mpt3) is not running the minimum required firmware version. Please upgrade to version 1.03.35.69 or later before installing HP-UX 11i v3. Please check the mptutil(1M) man page for more information on upgrading the firmware on your Ultra320 SCSI cards. WARNING: If using an active/passive Fibre Channel device, you must install the correct active/passive plug-in to continue using the device in active/passive mode with HP-UX 11i v3. Alternatively, you can upgrade the device to a firmware revision which supports active/active mode before installing HP-UX 11i v3. WARNING: The utility could not determine the latest firmware version for the device at H/W path 0/0/2/0.0.0.0. Please manually verify that this device is running the minimum required firmware version for HP-UX 11i v3. WARNING: The utility could not determine the latest firmware version for the device at H/W path 0/3/1/0.8.0.1.0.0.0. Please manually verify that this device is running the minimum required firmware version for HP-UX 11i v3. WARNING: The utility could not determine the latest firmware version for the device at H/W path 0/3/1/0.8.0.1.0.0.1. Please manually verify that this device is running the minimum required firmware version for HP-UX 11i v3. NOTE: For information on supported HP Storage devices and third-party storage devices which have been qualified as interoperable with HP-UX 11i v3, please refer to the following web-site: http://www.hp.com/products1/serverconnectivity/index.html , respectively under Mass Storage Connectivity and HP-UX Third Party Connectivity. For support of all other storage devices on HP-UX 11i v3, HP recommends that you contact your third party storage vendor to determine compatibility of third-party (non-HP) storage with HP-UX 11i v3. * VALIDATION RESULT: 0 errors, and 6 warnings. Congratulations! This system will install and boot HP-UX 11i v3 successfully. However, please review all WARNING messages as your current mass-storage configuration may not fully operate on HP-UX 11i v3. * All details saved to the log file at /var/adm/msv2v3check/072507_164744 ======= ENDED at Wed Jul 25 16:47:45 EETDST 2007 ON everest root@everest /fstore1/EGS-PANO #