P00 tru-cd-dev2>>>show boot* boot_dev dkb100.1.0.3.0 boot_file boot_osflags A boot_reset ON bootdef_dev dkb100.1.0.3.0 booted_dev dkb100.1.0.3.0 booted_file booted_osflags A SROM V1.1 on cpu0 XSROM V6.1 on cpu0 BCache testing complete on cpu0 mem_pair0 - 512 MB 20..21..23.. please wait 18 seconds for T24 to complete 24.. Memory testing complete on cpu0 starting console on CPU 0 sizing memory 0 512 MB EDO probing IOD1 hose 1 bus 0 slot 1 - NCR 53C810 bus 0 slot 3 - DECchip 21140-AA bus 0 slot 4 - DECchip 21140-AA probing IOD0 hose 0 bus 0 slot 1 - PCEB probing EISA Bridge, bus 1 bus 0 slot 3 - QLogic ISP10X0 bus 0 slot 5 - KGPSA-C configuring I/O adapters... ncr0, hose 1, bus 0, slot 1 tulip0, hose 1, bus 0, slot 3 tulip1, hose 1, bus 0, slot 4 floppy0, hose 0, bus 1, slot 0 isp0, hose 0, bus 0, slot 3 kgpsa0, hose 0, bus 0, slot 5 System temperature is 22 degrees C AlphaServer 4100 Console V6.1-1, 3-MAR-2004 10:20:24 CPU 0 booting (boot ewa0.0.0.3.1 -flags A) Trying MOP boot. Trying BOOTP boot. Broadcasting BOOTP Request... Received BOOTP Packet File Name is: /ris/r0k1 local inet address: 162.137.49.111 remote inet address: 162.137.49.110 TFTP Read File Name: /ris/r0k1 netmask = 255.255.255.0 Server is on same subnet as client. ................................................................ ................................................................ ........................... bootstrap code read in Building FRU table base = 200000, image_start = 0, image_bytes = 9a1ad0 initializing HWRPB at 2000 initializing page table at 1f2000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Secondary boot program - Wed Oct 16 17:58:08 EDT 2002 Loading vmunix ... Loading at 0xffffffff00000000 Sizes: text = 7922752 data = 2044560 bss = 2433008 Starting at 0xffffffff00011d70 Broadcasting BOOTP Request Retrying bootp; next attempt in 5 seconds. ..... ....Retrying bootp; next attempt in 7 seconds. Retrying bootp; next attempt in 5 seconds. .....Retrying bootp; next attempt in 7 seconds. .......boot_devopen_bp: Unable to access network boot_devopen: failure to open boot device bcm: DEGXA driver V1.0.6 NUMA lanlog failed configuring ev7_ocla subsystem kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) Alpha boot: available memory from 0x1c4a000 to 0x1fffc000 Compaq Tru64 UNIX V5.1B (Rev. 2650); Wed Oct 16 17:45:54 EDT 2002 physical memory = 512.00 megabytes. available memory = 483.68 megabytes. using 1911 buffers containing 14.92 megabytes of memory kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) DDR: WARNING: Unable to obtain Device Information Database Unable to open file /etc/ddr.db DDR: WARNING: Basic Defaults will be used. Firmware revision: 6.1 PALcode: UNIX version 1.23 AlphaServer 4100 5/300 2MB kds - unable to open /etc/gen_databases (status=5) pci1 (primary bus:1) at mcbus0 slot 5 Loading SIOP: script c0000000, reg 7fbfd00, data c000a000 DDR : Error opening database (5) kds - unable to open /etc/gen_databases (status=5) DDR: WARNING: Unable to obtain Device Information Database Unable to open file /etc/ddr.db DDR: WARNING: Basic Defaults will be used. Firmware revision: 6.1 PALcode: UNIX version 1.23 AlphaServer 4100 5/300 2MB kds - unable to open /etc/gen_databases (status=5) pci1 (primary bus:1) at mcbus0 slot 5 Loading SIOP: script c0000000, reg 7fbfd00, data c000a000 DDR : Error opening database (5) kds - unable to open /etc/gen_databases (status=5) scsi0 at psiop0 slot 0 rad 0 tu0: DECchip 21140: Revision: 1.2 tu0 at pci1 slot 3 tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-04-F5-B9 tu0: console mode: selecting 100BaseTX (UTP) port: full duplex kds - unable to open /etc/gen_databases (status=5) tu1: DECchip 21140: Revision: 2.0 tu1: auto negotiation capable device tu1 at pci1 slot 4 tu1: DEC TULIP (10/100) Ethernet Interface, hardware address: 00-00-F8-06-08-43 tu1: auto negotiation off: selecting 100BaseTX (UTP) port: full duplex kds - unable to open /etc/gen_databases (status=5) kds - unable to open /etc/gen_databases (status=5) pci0 (primary bus:0) at mcbus0 slot 4 eisa0 at pci0 ace0 at eisa0 ace1 at eisa0 gpc0 at eisa0 lp0 at eisa0 fdi0 at eisa0 fd0 at fdi0 unit 0 isp0 at pci0 slot 3 isp0: QLOGIC ISP1040B/V2 - Differential Mode isp0: Firmware revision 5.57 (loaded by console) isp0: Fast RAM timing enabled. DDR : Error opening database (5) kds - unable to open /etc/gen_databases (status=5) scsi1 at isp0 slot 0 rad 0 kds - unable to open /etc/gen_databases (status=5) emx0 at pci0 slot 5 KGPSA-CA : Driver Rev 2.06 : F/W Rev 3.81A4(2.01A0) : wwn 1000-0000-c92f-2950 kds - unable to open /etc/gen_databases (status=5) scsi2 at emx0 slot 0 rad 0 kds - unable to open /etc/gen_databases (status=5) Created FRU table binary error log packet kernel console: ace0 i2c: Server Management Hardware Present NetRAIN configured. Random number generator configured. Booted from Network Interface (BOOTP 1 3 0 0 0 6000 91011 00-00-F8-04-F5-B9 1) syncing disks... done DUMP: Warning: no disk available for dump. DUMP: first crash dump failed: attempting memory dump... DUMP: compressing 51840KB into 455631KB memory... DUMP: Starting Address Ending Address Size(MB) DUMP: ------------------ ------------------ -------- DUMP: 0xfffffc001fc84000 - 0xfffffc001fffbfef 3.4 (indicator) DUMP: Writing data.. [2MB] DUMP: crash dump complete. halted CPU 0 halt code = 5 HALT instruction executed PC = ffffffff00300d70 CPU 0 booting Inconsistent boot driver state. System will be reset prior to boot.