$@SYS$MANAGER:TCPIP$CONFIG.COM
        HP TCP/IP Services for OpenVMS Client Components Configuration Menu

        Configuration options:

                 1  -  DHCP Client      Disabled Stopped
                 2  -  FTP Client       Disabled Stopped
                 3  -  NFS Client       Disabled Stopped
                 4  -  REXEC and RSH    Disabled Stopped
                 5  -  RLOGIN           Disabled Stopped
                 6  -  SMTP             Disabled Stopped
                 7  -  SSH Client       Disabled Stopped
                 8  -  TELNET           Enabled  Started
                 9  -  TELNETSYM        Disabled Stopped

                 A  -  Configure options 1 - 9
                [E] -  Exit menu

Enter configuration option: 2


FTP CLIENT Configuration    << Murali - This is FTP Client Configuration>>

Service is not enabled.
Service is stopped.

        FTP CLIENT configuration options:

                 1 - Enable service on this node

                 2 - Enable & Start service on this node

                [E] - Exit FTP_CLIENT configuration

Enter configuration option: 2
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_CLIENT.EXE installed
%TCPIP-I-INFO, logical names created
%TCPIP-S-STARTDONE, TCPIP$FTP_CLIENT startup completed
Press <ENTER> key to continue ...

The FTP SERVER is not enabled.

* Do you want to configure FTP SERVER [NO]: YES

FTP Configuration  << Murali - This is FTP Server Configuration>>

Service is defined in the SYSUAF.
Service is defined in the TCPIP$SERVICE database.
Service is not enabled.
Service is stopped.

        FTP configuration options:

                 1 - Enable service on this node

                 2 - Enable & Start service on this node

                [E] - Exit FTP configuration

Enter configuration option: 2
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_CHILD.EXE installed
%TCPIP-I-INFO, image SYS$SYSTEM:TCPIP$FTP_SERVER.EXE installed
%TCPIP-I-INFO, logical names created
%TCPIP-I-INFO, service enabled
%TCPIP-S-STARTDONE, TCPIP$FTP startup completed
Press <ENTER> key to continue ...