ID: 31046 Status: Complete Start time: 3/3/10 6:29 PM Task name: ibm server End time: 3/3/10 6:29 PM Tool: System Automatic Discovery Duration: 14 sec Owner: root Target: ibm-x336 Run by: root Command: N/A ________________________________________ System Name: ibm-x336 Status: Complete Exit code: N/A Stdout: ********* Significant issues and overall target discovery/identification status: Normal: The system has valid hardware data (model, serial number, and unique identifier) and has been identified properly for SIM to manage. Normal: System(s) have been successfully identified. Normal: Identification target Status is complete ********* Details (listed for information only, not all results are significant): * Starting identification process... * Checking for known running web servers... * Checking for System Management Homepage and other HP web agents... Normal: The System Management Homepage is not installed on this system. It may not be supported. * Checking for SNMP protocol support on system... Normal: The system did not respond to SNMP. Verify security settings and community strings in Options->Security->Credentials->System Credentials * Running SNMP System Type manager ... Normal: The system does not support SNMP. * Running SNMP base cluster identification using common cluster MIB... Normal: This system does not have the common cluster MIBs support. * Running IPMI protocol identification... Normal: IPMI protocol not detected so skipping IPMI Identification. * Checking for WBEM protocol support on system... * Running WBEM rules based identification... Minor: Identification cannot get computer system hardware data from the WBEM / WMI providers. * Running Virtual Machine (VM) Host (non HP Integrity VM Host) Identification... Normal: The system is not a VM Host (non HP Integrity VM Host), or WBEM credentials may not be specified so skipping VM Identification. * Running WS-Man identification... Minor: The system did not respond to WS-Management (WS-Man) request. * Running HP ProLiant management agent identification... Normal: The system does not support SNMP. * Running HP NetServer identification... Normal: The system does not support SNMP. * Running HP-UX SNMP identification... Normal: The system does not support SNMP. * Running SSH Protocol identification... Normal: This system has SSH protocol support. * Running SSH Identification... Normal: The system can be logged in using SSH protocol; has a valid SSH credential. Normal: OS Name is identified by the SSH Identification. Normal: This Linux system is identified by the SSH identification. * Running Storage identification... * Did not detect the WBEM protocol support on this system. SMI storage identification will be skipped. * Storage identification completed. * Running HP Serviceguard Identification... Normal: The system is not part of HP Serviceguard cluster. * Running SNMP subtypes identification... * Running OA Identifier which will discover systems in an enclosure if the automatic enclosure discovery option for OA is enabled... Normal: A non-embedded operation system is detected so skipping the OA identification. * Running iLO Identifier which will discover the server if the automatic server discovery option for iLO is enabled... Normal: A non-embedded operation system is detected so skipping the ILO identification. * Running p-Class Identifier... Normal: The system is not a p-Class so skipping p-Class identification. * Resolving DNS names... Normal: The DNS name was successfully resolved for the system. * Running Virtual Machine Management (VMM) Plug-in Identification... Normal: Virtual Machine Management (VMM) Integration is not enabled so skipping VMM VM Identification. * Building system relationships... Minor: The Secure Shell key-based access authentication is not configured on the system(s). Minor: System Management Homepage (SMH) is not installed or is not responding on the system(s). * Running system Manage Communication diagnosis... * System identification finished on system. Stderr: None ####################################setup process about common agent################### ./dir6.1.1_commonagent_linux.sh self-extracting installation program... Please wait... RHEL 5 Update = 4 Checking if required ports are in use. By running the installer non-interactively, you have agreed to the stated license terms under the license directory of the installed program. IBM Systems Director Platform Agent 6.1.1 installation. Starting ipmi drivers: [确定] ipmi_msghandler module loaded. ipmi_si module loaded. ipmi_devintf module loaded. /dev/ipmi0 exists. Extracting RPM files to /tmp/platform.ooVVhj3429 ..................... 331277 blocks Preparing... ################################################## ibmcim-icu ################################################## ibmcim-instrumentation ################################################## ibmcim-slp ################################################## Starting IBM SLP service agent ibmcim-ssl ################################################## Creating a SSL private key... Generating RSA private key, 1024 bit long modulus .........++++++ .....++++++ e is 65537 (0x10001) Generating a SSL certificate request... Self-signing an SSL certificate based on system information... Signature ok subject=/C=US/ST=NORTH CAROLINA/L=RTP/O=IBM/OU=STG/CN=ibm-x336.test Getting Private key ibmcim-objectmanager ################################################## Starting IBM CIM indication listener Started. [确定] Starting IBM CIM object manager ibmcim-baseserver ################################################## ibmcim-baseos ################################################## ibmcim-serviceprocessor ################################################## ibmcim-network ################################################## ibmcim-agentextensions ################################################## 启动 tier1slp?please wait ...... [确定] Installing newer Tivoli CIT scanners ibmcim-snmp ################################################## ibmcim-baseserver-mof ################################################## ibmcim-baseos-mof ################################################## ibmcim-serviceprocessor-mof ################################################## ibmcim-network-mof ################################################## ibmcim-agentextensions-mof ################################################## dsa ################################################## ibmcim-snmpextensions ################################################## Starting ICC Extension SNMP SubAgent [确定] ibmcim ################################################## Connecting to localhost:15988... Preparing... ################################################## Check that the CIM server is running prior to install. lsi_mr_hhr ################################################## Setting environment variables Setting file permissions Creating conf files. Making symbolic links. Compiling InternalRAID_13.mof. Compiling InternalRAID_R_13.mof. Compiling ProviderProfileCapabilities_R_13.mof. Running cimsubscribe Connecting to localhost:15988... Connecting to localhost:15988... Running ldconfig Creating log directory. Restarting the CIM server Stopping IBM CIM object manager [确定] Starting IBM CIM object manager lsi_mr_hhr install has completed. Preparing... ################################################## Found IBM Remote Supervisor Adaptor II. ibmusbasm64 ################################################## Removing previous Start/Kill ibmasm run levels. Starting IBM RSA II daemon Calling install_initd ibmasm Attempting to install Common Agent Services. Preparing... ################################################## ISDCommonAgent ################################################## Attempting to install features. Restarting the agent runtime. Feature installation complete. Restarting the agent runtime. Installation of IBM Systems Director Common Agent completed successfully.