topic 3Par 7400 configuring Adaptive Optimization with Remote Copy in HPE 3PAR StoreServ Storage

3Par 7400 configuring Adaptive Optimization with Remote Copy

Brad Smithberger — Wed, 12 Feb 2014 15:26:36 GMT

I have couple 3par 7400(source and destination using remote copy) with AO configured using SSD, FC and NL as my tiers. I've found in one document with following statement:

"Adaptive Optimization (AO) supports RC but until failover, the AO policies on the destination array should remain disabled."

I want to be able to run AO on both source and destination VVs to utilize multi-tiering--for space and performance reasons....not just in failover scenario. Anyone have a work around?

Any feed back is appreciated.

Thanks, Brad

Re: 3Par 7400 configuring Adaptive Optimization with Remote Copy

Patrick Terlisten — Wed, 12 Feb 2014 17:22:54 GMT

Hello Brad,

which problem do you want to solve, by enabling AO on the destination? AFAIK there's currently no way to move chunklets on the destination side to the same tier as on the source.

Re: 3Par 7400 configuring Adaptive Optimization with Remote Copy

Brad Smithberger — Wed, 12 Feb 2014 18:16:31 GMT

Hi Patrick,

Thanks for your response.

Yes, want to enable AO on destination side. Hoping AO would determine which chunklets where updated after being replicated, and have AO move data to respective tiers accordingly.

My fear is, I'm forced to replicate some VVs to NL because of lack of space in FC CPGs, have failover event, and users suffer for a day or so before AO can determine where to move data in their respective tiers (SSD, FC & NL). I'm replicating several 10s of TBs. First couple days after a failover could slow and painful for the users until data gets put into right tiers.

Trying to find best way to go at this without have to buy more FC disks.

Brad

Re: 3Par 7400 configuring Adaptive Optimization with Remote Copy

Sheldon Smith — Wed, 12 Feb 2014 18:41:32 GMT

On the secondary side, all you can do is: Determine which VLUNs are busiest, Dynamic Opt them to your FC CPG. Then DO the rest to your NL CPG.

Re: 3Par 7400 configuring Adaptive Optimization with Remote Copy

Patrick Terlisten — Wed, 12 Feb 2014 20:19:31 GMT

Unfortunately there's nothing much you can do. Currently there is no way to "replicate" the AO information to the destinations side.

Sheldon has posted a possible way.