topic Re: 3PAR 7400 Setup Issue in HPE 3PAR StoreServ Storage

3PAR 7400 Setup Issue

jcsjr — Thu, 23 May 2013 20:00:29 GMT

I'm trying to setup our new 2-node 3PAR 7400 system and have successfully created and configured the VSP.

But all attempts at configuring the 3PAR have failed. The VSP wizard cannot find the 3PAR system, which is plugged into our network (both nodes) at the MGMT ports.

To rule out router and firewall problems, I've attached both 3PAR NICs, both ESX host NICs and my laptop to an 5 port Linksys switch. The wizard still cannot find the 3PAR.

Is there something I must at the 3PAR to enable discovery?

Thanks.

Re: 3PAR 7400 Setup Issue

Bart_Heungens — Thu, 23 May 2013 20:15:43 GMT

Hi,

I deployed already a lot of these 7000's meanwhile and I never succeeded either to have this working. Even people from HP use the 'other' way... The trick is to connect via serial cable to the 7000 controller and configure it via Putty... But the questions asked (IP address, name, time zone, and so on) are not that hard...

If you are interested I can send you the procedure... One day (when I finished this batch of 18 7000's across Europe) I will put the procedure anyway on my blog also...

Kr,

Bart

Re: 3PAR 7400 Setup Issue

jcsjr — Thu, 23 May 2013 20:40:03 GMT

Bart,

Please send me the procedure.

Thank you very much for this information. Been pulling my hair out for several weeks trying to find the "magic".

It's kind of sad to run into this problem up front. You have to wonder how HP initializes their test systems if they follow the same installation guides we are given.

Re: 3PAR 7400 Setup Issue

Bart_Heungens — Thu, 23 May 2013 20:41:59 GMT

Hi,

The HP people I know (I am not from HP) use the good old CLI way of working... For me it always worked until now... I know from some people (very few however) that the wizard was working for them... Most of the time however not...

Let's say that this probably will be fixed in some future version of the software...

Kr,

Bart

Re: 3PAR 7400 Setup Issue

jcsjr — Thu, 23 May 2013 21:56:30 GMT

Please send me the procedure. We have had no luck connecting with Putty.

Re: 3PAR 7400 Setup Issue

Bart_Heungens — Fri, 24 May 2013 05:48:53 GMT

Hi,

Important things to know for that connection:

- use grey adapter with PN 180-0055-01 with the blue ethernet cable, otherwise won't work

- connect it to the Mfg port on top controller

- use 8b-n-no flow control-57600 in Putty...

Should work like that...

Kr,

Bart

Re: 3PAR 7400 Setup Issue

jcsjr — Fri, 24 May 2013 17:11:22 GMT

Do you know the password for user "console"?

Re: 3PAR 7400 Setup Issue

Bart_Heungens — Fri, 24 May 2013 17:31:01 GMT

I have send you a private message...

Re: 3PAR 7400 Setup Issue

jcsjr — Fri, 24 May 2013 18:42:29 GMT

Got it. Thanks for all of your help.

Our 3PAR is breathing now.

Re: 3PAR 7400 Setup Issue

Bart_Heungens — Fri, 24 May 2013 18:48:32 GMT

Have fun with your 3PAR! It is a great product!

Re: 3PAR 7400 Setup Issue

sidali — Sat, 01 Jun 2013 17:07:52 GMT

PLEAS I'AM LOOKING FOR THE PASSWORD TO , BECAUSE TE WIZARD TO SETUP THE STORAGE FAILED TO INITIALIZE THE VOLUME, AND I SEE THAT THE ONLY WAY IS TO CONNECT WITH SERIAL AND CONFIGURE THE STORAGE.

THE VSP WAS INSTALLED AND THE LAST SPTEP IS TO CONFIGURE THE STORAGE ( I USE THE SMART START°

BEST REGARDS

Re: 3PAR 7400 Setup Issue

composetpositro — Mon, 10 Feb 2014 11:50:11 GMT

Dear Bar,

Could you please send me the console password!

many thanks for your attention

Re: 3PAR 7400 Setup Issue

Dennis Handly — Wed, 23 Apr 2014 03:47:42 GMT

>Could you please send me the console password!

Have you seen this recent post?

http://h30499.www3.hp.com/t5/HP-3PAR-StoreServ-Storage/What-s-3Par-default-ID-Password/m-p/6361731#M1086

(The console password has since been removed.)

Re: 3PAR 7400 Setup Issue

composetpositro — Mon, 17 Feb 2014 13:53:53 GMT

many thanks

Re: 3PAR 7400 Setup Issue

HoaT — Tue, 22 Apr 2014 21:46:39 GMT

Can you also email me the "console" password?

Re: 3PAR 7400 Setup Issue

Dennis Handly — Sun, 12 Mar 2017 04:48:58 GMT

>Can you also email me the "console" password?

You should be contacting HPE Support for it.

Re: 3PAR 7400 Setup Issue

Onnling — Wed, 08 Mar 2017 04:10:55 GMT

Hi Body ,

Please send me the console password .

~~Personal Info Erased~~

Thanks

LeongKO

Re: 3PAR 7400 Setup Issue

Sheldon Smith — Wed, 07 May 2014 12:09:09 GMT

No.

A public forum such as this is not the means for sharing a password: Contact HP Support.

Re: 3PAR 7400 Setup Issue

deanoyeks — Wed, 08 Mar 2017 04:11:44 GMT

Hi Honoured Contributor,

Could you send me the procedure to connect via a serial cable to the 7000 controller and configure it via Putty. Could you also send me the console password. My email address is ~~Personal Info Erased~~ . Thanks

Re: 3PAR 7400 Setup Issue

godfather-1 — Tue, 02 Sep 2014 10:30:19 GMT

Hello All friends

I have all the username and password on hp 3par.

if you need to password please say me.

best regards.