topic Re: How do I use HP 3PAR cli commands? in HPE 3PAR StoreServ Storage

How do I use HP 3PAR cli commands?

StuartA46 — Thu, 02 Feb 2012 21:37:53 GMT

All:

1st, am I in the correct Forum?

2nd, question: I'm used to EMC symcli and naviseccli, where you just issue the command you want, and then you "awk" or "grep" the output as you see fit. On the 3PAR, apparently, you issue the command "cli", then you get a "cli prompt" then you execute your commands. How do you run "scripts" of commands, with "awk" and "grep", etc?

Does anybody have a simple example of a 3PAR script session they can show me?

Stuart

Re: How do I use HP 3PAR cli commands?

Dennis Handly — Thu, 02 Feb 2012 21:56:43 GMT

>am I in the correct Forum?

(I've asked the topic to be moved to SAN enterprise.)

>On the 3PAR, apparently, you issue the command "cli", then you get a "cli prompt" then you execute your commands. How do you run "scripts" of commands, with "awk" and "grep", etc?

You can invoke cli in several ways.

1) Invoke the cli shell and do several commands, as you did.

2) Invoke cli with the command on the command line:

cli shownode

3) Or invoke the command directly as "shownode", which basically does 2).

Re: How do I use HP 3PAR cli commands?

StuartA46 — Thu, 02 Feb 2012 22:14:31 GMT

Dennis:

that's great news! but if I run "cli shownode" or just "shownode" how do I specify the Array IP address, my username and my password? Do i stick it in the command? Is there some kind of "environmnet setup"?

Stuart

Re: How do I use HP 3PAR cli commands?

Dennis Handly — Sun, 01 Mar 2015 00:23:20 GMT

>if I run "cli shownode" or just "shownode" how do I specify the Array IP address, my username and my password? Do I stick it in the command? Is there some kind of "environment setup"?

Two ways:

1) export TPDSYSNAME & TPDPWFILE

2) Use the -sys & –pwf options. (Or –user & –password instead of -pwf.)

See cli command page 70.

See setpassword command page 310 to create the -pwf file.

3.2.1 CLI ref manual:

http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5044394&docId=emr_na-c04204279&docLocale=en_US

Re: How do I use HP 3PAR cli commands?

StuartA46 — Fri, 03 Feb 2012 15:02:21 GMT

Dennis:

Thanks. I will try this today.

Stuart

Re: How do I use HP 3PAR cli commands?

Sheldon Smith — Mon, 06 Feb 2012 15:52:47 GMT

Note: If you have more than one array, you need a separate password file for each, even if they have the same username and password.

Re: How do I use HP 3PAR cli commands?

Dennis Handly — Wed, 08 Feb 2012 23:50:59 GMT

>you need a separate password file for each, even if they have the same username and password.

You're right for a normal user name. And it also fails if you delete and recreate the same user.

Re: How do I use HP 3PAR cli commands?

Dennis Handly — Wed, 08 Feb 2012 23:49:47 GMT

>If you have more than one array, you need a separate password file for each, even if they have the same username and password.

There is an obvious solution to this. :-)

1) On the first machine use createuser

2) Then login to that user and use setpassword -saveonly -file file1

3) Look inside file1 to get the encrypted password

Then on other machines, use:

createuser -e encrypted-password ...