How to modify VV index when creating many LUNs at same time

NTA12 — Thu, 28 May 2015 12:04:24 GMT

Hello,

When you are creating, for instance, 3 LUNs at the same time, you will get vvname.0, vvname.1 and vvname.2.

Is it possible to modify the index value?

Thx.

Best regards.

Re: How to modify VV index when creating many LUNs at same time

Sheldon Smith — Thu, 28 May 2015 12:42:17 GMT

You can using the command line. You can specify a starting index when you give the volume name.

The following example creates 3 VVs vv1.2, vv1.3, vv1.4:

cli% createvv -cnt 3 cpg1 vv1.2 1g

Note: While I work for HP, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!

topic Re: How to modify VV index when creating many LUNs at same time in HPE 3PAR StoreServ Storage

How to modify VV index when creating many LUNs at same time

Re: How to modify VV index when creating many LUNs at same time