topic Re: How to change the 3PAR Service Processor Hostname in HPE 3PAR StoreServ Storage

How to change the 3PAR Service Processor Hostname

DaveHugghes — Tue, 12 Jul 2016 02:58:11 GMT

Is it possible to change the hostname on the service processor by editing the /etc/sysconfig/network file and rebooting the SP? Or is there another procedure I should use?

Dave

Re: How to change the 3PAR Service Processor Hostname

giladzzz — Tue, 12 Jul 2016 07:28:15 GMT

The service proccesor hostname is fixed and it is set at MOB

it is always SP(folowed by 3PAR serial number) where the serial number was 5 digits

it is SP000 (serial number).

this is a must by HP.

Regards

Re: How to change the 3PAR Service Processor Hostname

Cali — Wed, 13 Jul 2016 09:13:45 GMT

Realy?

All my 40 Service Processor have there Hostname in the Company Server Name Rule Style.

It is possible to change it with the GUI: SPMaint > 2. Network Configuration > 4.Change Public Network Interface Parameters

Re: How to change the 3PAR Service Processor Hostname

DaveHugghes — Wed, 13 Jul 2016 12:46:42 GMT

I tried changing the hostname via SPMaint > 2. Network Configuration > 4.Change Public Network Interface Parameters on a test array and it seemed to work just fine in limited testing. Thanks for your help!

Re: How to change the 3PAR Service Processor Hostname

Gary_L — Wed, 13 Jul 2016 13:39:46 GMT

Hi Dave,

SPID and SP Host name are different, SPID must be SP000+InServS/N, but SP Host name can be changed from SPOCC.

Gary

Re: How to change the 3PAR Service Processor Hostname

DaveHugghes — Wed, 13 Jul 2016 13:57:50 GMT

Thanks Gary, It's the hostname that I'm concerned about, I understand about the SPID.

Dave