topic Rebooting 3par node in HPE 3PAR StoreServ Storage

Rebooting 3par node

shang1983 — Sat, 20 Aug 2016 18:09:58 GMT

I have a 3PAR 7200C with physical service processor. The OS of the 3PAR is 3.2.1.292 with P17 and P18. I would want to perform a node reboot for our datacentre redundancy testing.

I login to the service processor, but the reboot node drop down list option seems to defer from the usual. The normal drop down list option will have "node 0,Node 1 or Node All" but this dropdown list shows "Node spcomm_get_node_list,node failed,node in,node clusternodelist and node all"

Why the drop down list option differs?

Re: Rebooting HPE 3PAR node

Dennis Handly — Sat, 20 Aug 2016 22:14:25 GMT

You can always skip the SP and use the Remote CLI client to execute the "shutdownnode reboot" command

Re: Rebooting HPE 3PAR node

shang1983 — Sun, 21 Aug 2016 01:28:37 GMT

Yes, I could apply CLI command to reboot but because after the testing, the device will pass to Infra team to handle. They only familiar with GUI.

Re: Rebooting HPE 3PAR node

shang1983 — Wed, 14 Sep 2016 07:20:03 GMT

I've get the remote support to upgrade the firmware. After the upgrade, the reboot node option list are back to normal