topic 3par storserv sim node reboot error in HPE 3PAR StoreServ Storage

3par storserv sim node reboot error

aspeckman — Thu, 29 Sep 2016 18:39:47 GMT

I am using vmware workstation 11 on windows 10 enterprise

I'm using latest simulator build, downloaded on 9/28/16

i have configured networking according to the setup documents, using vmnet4 which is mapped to a host-only 10.4.4.0 and 255.255.255.0 in workstation netwo.rk editor I'm configured all Network Adapters on the 3 vm's to use a custom VMnet4(Host-only) network. both nodes have network adapater 2 as bridged(automatic) and adapter 3 as LAN segment to 'simulator'

on sim_esd, I created my cage and started esd daemon.

on node1 and node2 I ran step 1 configuration and assigned the first serial number to both.

I rebooted both nodes.

during reboot nodes appear to see each other, becuase if I don't boot up node 1, node 0 recognizes that and give a message.

so, during booting of both nodes, they get to the Eth0: link becomes ready

node 0 will display 2 messages

1. topology change detected. propogating

2. port 1(eanet0) entering forwarding state

then after that node 0 says NOHZ: local_softirq_pending 08 about a dozen times

Node 1 says the same, but without the 2 messages above from node 0

after that it gives me a login prompt and I get back to the menu.

I select OOB experience

Here are the messages from each node

Tpd ready: node= 0, Master=0, Online=0x03, Integrated=0x00

Create cages and start the ESD daemon before running Out of Box Procedure

Tpd ready: node= 1, Master=0, Online=0x03, Integrated=0x00

Create cages and start the ESD daemon before running Out of Box Procedure

any idea, seems to be networking related.

Re: 3par storserv sim node reboot error

aspeckman — Fri, 30 Sep 2016 09:15:34 GMT

FIXED

since I started with the original simulator, only a few days later it did get an update to include a missing OVF file.

So, I didn't feel confident, even thought I downloaded the latest, that the correct ovf file was used to create the 2 nodes.

I created 2 new nodes and got the same errors, no luck.

I went back to my esd and tried to do an 'esd stop' It says it was not running or not in a running state. I tried to run it, it said it was already running. So, I figured it was just in the process of doing some cleanup. I left it alone for a while. Came back at it this morning, fresh mind, stopped ESD, recreated the cages, ran ESD, not the OOB experience is working

WOW, eurika. sometimes just gotta walk away from it for a while

Re: 3par storserv sim node reboot error

Girish_03 — Fri, 27 Apr 2018 14:48:27 GMT

Getting the same error. And, it is not working by keeping it idle for some time.

Re: 3par storserv sim node reboot error

Vinay_mirle — Thu, 24 May 2018 05:03:25 GMT

3par simulator node restart again not able to login

getting below error while loging in node system

SIM: trying to bring up link to 1, addr

trying to bring up link to node 1.

can some one check the issue.

Steps followd to install the 3PAR simulator.

1) Deployed the VM [SIM_Node0, SIM_node1 and ESD_node ] using OVF file in VMware workstation.

2) Once we deployed, we logged in ESD host using user name - Root, password- root. and configured the cages. then start the esd.

2) then we setting up the node0 and restarted.

after that we are facing this issue.

please check and suggest what mistake we are doing while installaing.