topic Re: Failed to Disk Replace in HPE 3PAR StoreServ Storage

Failed to Disk Replace

paymanzox — Sat, 15 Feb 2020 13:02:20 GMT

Hello guys;

I have a problem when want replace failed Disk in 3par 8440 .when try to replace in cli in servicemag status i see this error

"Could not download firmware
Opcode = SCCMD_DOCDB
Node = 253
Tpd error code = TE_INVALID -- Invalid input parameter
Tpd error info = Can't open /opt/tpd/fw/drive/KCF-3P04.bin"
i Updated Disk firmware to 3p04 But Error still exists

Re: Failed to Disk Replace

SUBHAJIT KHANBARMAN_1 — Sat, 15 Feb 2020 13:33:42 GMT

Workaround is to servicemag unmark, then servicemag resume, then dismiss the old PD number.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

**********************************************************************

Re: Failed to Disk Replace

paymanzox — Sat, 22 Feb 2020 06:37:51 GMT

Thank you SUBHAJIT