topic Re: DDS consumed a lot of capacity in HPE 3PAR StoreServ Storage

DDS consumed a lot of capacity

shang1983 — Fri, 07 May 2021 12:12:39 GMT

I have a 3PAR 8400 with 16 SSD 3.84TB drives. In the SSMC shows the capacity in critical stage. When checked the DDS comsumed over 33TiB. I checked the dedup ratio is 1.2:1. How can I release the DDS space?

Re: DDS consumed a lot of capacity

Josh94K — Fri, 07 May 2021 13:44:55 GMT

Hello @shang1983

GC(Garbage collection) takes care of releasing space.

it's a background system process and usually takes time to complete.

If space is not getting released then you need to check if GC is working or not, in order to do that one needs to log in to root and run few commands, however, this activity is best performed with the help of HPE support.

You can also try to delete some data,

The file's deleted will be queued for reclaim, GC should take care of the same as per the scheduled interval.

check out the following link for more info

https://support.hpe.com/hpesc/public/docDisplay?docId=c04599458&docLocale=en_US

@shang1983 Hope this helps.

If you feel this was helpful please click the KUDOS! thumb below!

Re: DDS consumed a lot of capacity

sbhat09 — Fri, 07 May 2021 14:48:48 GMT

Hello Shang,

What is the collective used space of all the volumes? Do you see a large difference between the collective utilized space of the volumes and the utilization level showing in the alert? GC should free-up of it's own after the scheduled interval. If the issue continues to persist, please run 'compactcpg' individually for each CPG that contains the TDVVs in question. (please make sure there is no other data movement task like AO etc. are running at the same time.)

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

Re: DDS consumed a lot of capacity

shang1983 — Fri, 07 May 2021 15:16:45 GMT

I only used 1 CPG. I've run the compactcpg few times. It only released 800GB of space. There's no AO as the storage only consist of SSD drives.

Re: DDS consumed a lot of capacity

sbhat09 — Fri, 07 May 2021 15:46:32 GMT

You may wait for the scheduled interval to complete and check the status again. Further interrogation of the issue required detailed log analysis. So, if the issue persists even after that, you may reach out to the support.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

Re: DDS consumed a lot of capacity

sbhat09 — Wed, 19 May 2021 10:06:20 GMT

Hello Shang,

Were you able to get the issue resolved?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

Re: DDS consumed a lot of capacity

shang1983 — Wed, 02 Jun 2021 14:14:31 GMT

I'm getting HPE Support to look into this issue. Will update if able to resolve it.