topic Re: Don't know the exact Host server or IP Address when installing HPE Swarm Learning in High Performance Computing

Don't know the exact Host server or IP Address when installing HPE Swarm Learning

DuyLe — Fri, 14 Apr 2023 15:24:12 GMT

Hi,

In the "Install HPE Swarm Learning" step, when I set up the HPE Swarm Learning Web UI, I had a question in the Hosts step. Because at this step, I need to enter "Host server or IP Address". I don't know exactly what I need to get.

I use Linux operating system. Can anyone tell me, Where can I find this information through the command line?

Thank you very much!

Re: Don't know the exact Host server or IP Address when installing HPE Swarm Learning

Vinky_99 — Fri, 14 Apr 2023 15:03:52 GMT

@DuyLe

To find the IP address of your Linux machine, you can use the ifconfig command in the terminal.

Here are the steps:

Open a terminal window.
Type ifconfig and press Enter.
You should see a list of network interfaces. Find the one that is currently active, which will likely be labeled "eth0" or "wlan0" (for Ethernet or wireless, respectively).
Look for the "inet addr" field under that interface. The IP address will be listed there.

Alternatively, you can use the ip addr show command to get similar information.

Once you have obtained the IP address of your Linux machine, you can use it as the Host server or IP Address when installing HPE Swarm Learning.

Hope this helps!

Re: Don't know the exact Host server or IP Address when installing HPE Swarm Learning

DuyLe — Fri, 14 Apr 2023 15:23:08 GMT

@Vinky_99 , Thank you for your help!

Re: Don't know the exact Host server or IP Address when installing HPE Swarm Learning

Sunitha_Mod — Mon, 17 Apr 2023 05:43:10 GMT

Hello @DuyLe,

Perfect!

We are glad to know your concern has been addressed.