topic Re: Advice with HP Apollo 2000.... in Apollo

Advice with HP Apollo 2000....

ayumi37 — Thu, 08 Sep 2022 13:36:31 GMT

Hi All,

I'm looking for some advice/feedback in regards to the HP Apollo 2000 Chassis and the ProLiant XL170r Gen9 nodes.

The ILO card suggests that the systems CPUs are around 40C where as lmsensors is reading temps around the 50C and the system feels very hot to the touch.

I measured the output air temp with a cheap multimeter tempreture probe and was reading 50C again; So I was wondering, does anyone else run these systems and what are the temps they are seeing?

We're running 12 nodes over 3 chassis with RHEL 6 based OS and one of the PSU's has seemingly died after less than a week of use.

Thanks

Re: Advice with HP Apollo 2000....

Suman_1978 — Thu, 08 Sep 2022 04:46:51 GMT

Hi,

Please refer to Apollo 2000 System User Guide.

Redundant fan option, page#82
Environmental specifications, page# 193-195

This screenshot is from our servers. Please make sure the air ventilation is good around the server.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

Re: Advice with HP Apollo 2000....

Suman_1978 — Fri, 23 Sep 2022 09:49:48 GMT

Hello @ayumi37

Let me know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Thankyou
Suman