https://community.hpe.com/t5/array-performance-and-data/replication-bandwidth-look-ok/m-p/7044428#M1227 <P>Hello,</P><P>Without looking at your system indepth it's hard to give a definitive yes/no as to whether it's performing optimally. Within engineering there is a desire to further tune our snap/replicate technology to yield higher speeds where possible.</P><P>I'd recommend a quick call with Nimble Support to check it out.</P> Tue, 30 Apr 2019 20:13:54 GMT Nick_Dyer 2019-04-30T20:13:54Z https://community.hpe.com/t5/array-performance-and-data/replication-bandwidth-look-ok/m-p/7044413#M1226 <P>Hello all I have a CS7000 replicating down to a CS5000 at a different datacenter both over the 1gb port and it averages 270 Mbps.&nbsp; This is the only data running on these ports and there are no bandwidth limits.&nbsp; Does this seem to be a good rate?&nbsp; It seems to me like it should be higher but I don't know for sure.&nbsp;&nbsp;</P> Tue, 30 Apr 2019 17:11:56 GMT https://community.hpe.com/t5/array-performance-and-data/replication-bandwidth-look-ok/m-p/7044413#M1226 clovett 2019-04-30T17:11:56Z https://community.hpe.com/t5/array-performance-and-data/replication-bandwidth-look-ok/m-p/7044428#M1227 <P>Hello,</P><P>Without looking at your system indepth it's hard to give a definitive yes/no as to whether it's performing optimally. Within engineering there is a desire to further tune our snap/replicate technology to yield higher speeds where possible.</P><P>I'd recommend a quick call with Nimble Support to check it out.</P> Tue, 30 Apr 2019 20:13:54 GMT https://community.hpe.com/t5/array-performance-and-data/replication-bandwidth-look-ok/m-p/7044428#M1227 Nick_Dyer 2019-04-30T20:13:54Z