topic Estimated down time for NimbleOS upgrade from 3.7.0 in Array Performance and Data Protection

Estimated down time for NimbleOS upgrade from 3.7.0

Smcdonough — Tue, 27 Apr 2021 17:19:57 GMT

I've got a Nimble Storage unit (HPE NS CS1000 Hybrid Base Array) that I wanted to check on some of the performace aspects. Since the network isn't connected to the internet, it hasn't been updated since it got put into place and still uses the Flash based monitors and widgets.

How much downtime am I looking at (estimated) to do an update to the latest and greatest OS from 3.7.0 to 5.2.1?

Re: Estimated down time for NimbleOS upgrade from 3.7.0

Sheldon Smith — Tue, 27 Apr 2021 18:53:21 GMT

Downtime ???

None!!

The Nimble Storage array is an active / standby system. One controller is running, the other is getting updated. There is a short IO pause where IOs will take longer than typical. If you have the Nimble Connection Manager installed, then the multipathing timers are already set for iSCSI timeouts. However, I believe the standard iSCSI timeout settings are already sufficient.

The entire process will take a while. Looking at the NimbleOS 5.2.1.700 Release Notes, you need to first download and update NimbleOS 5.0.10. Once that is done, you download and update 5.2.1.700.

The system will do a System Check before starting the 5.0.10 update; if there are any issues, contact Nimble Support and get them resolved. I'd say "get them resolved first", but the update process won't even start if there are any issues.

Re: Estimated down time for NimbleOS upgrade from 3.7.0

Smcdonough — Tue, 27 Apr 2021 18:57:40 GMT

I will schedule a weekend update as appropriate and anticipate no downtime for my change controls. Thank you!