https://community.hpe.com/t5/array-performance-and-data/timezone-error-when-deploying-new-dhci-nimble-infrastructure/m-p/7141199#M1372 <P>Hi Patrice,</P> <P>This is usually related to Nimble Array having a different timezone that the one set on the ILO. I strongly recommend you to open a case with Nimble Support as they can help you to fix the issue.</P> <P>Thanks</P> <P>Fred</P> Wed, 30 Jun 2021 21:36:40 GMT Fred_Gagne 2021-06-30T21:36:40Z https://community.hpe.com/t5/array-performance-and-data/timezone-error-when-deploying-new-dhci-nimble-infrastructure/m-p/7140478#M1371 Hi, I'am deploying a new DHCI Nimble infrastructure and when I run the the software configuration the processus stop at 6% with an error to configure the iLO timezone. I'am using the same NTP server for ESXi, iLO and Nimble array. The version of NimbleOS is 5.3.1.100, and vCenter is 7.0u2. Do you have some suggest for my issue ? Regards, Patrice. Thu, 24 Jun 2021 14:52:56 GMT https://community.hpe.com/t5/array-performance-and-data/timezone-error-when-deploying-new-dhci-nimble-infrastructure/m-p/7140478#M1371 pgueron 2021-06-24T14:52:56Z https://community.hpe.com/t5/array-performance-and-data/timezone-error-when-deploying-new-dhci-nimble-infrastructure/m-p/7141199#M1372 <P>Hi Patrice,</P> <P>This is usually related to Nimble Array having a different timezone that the one set on the ILO. I strongly recommend you to open a case with Nimble Support as they can help you to fix the issue.</P> <P>Thanks</P> <P>Fred</P> Wed, 30 Jun 2021 21:36:40 GMT https://community.hpe.com/t5/array-performance-and-data/timezone-error-when-deploying-new-dhci-nimble-infrastructure/m-p/7141199#M1372 Fred_Gagne 2021-06-30T21:36:40Z