topic Re: Startup encryption in Array Performance and Data Protection https://community.hpe.com/t5/array-performance-and-data/startup-encryption/m-p/6982156#M142 <HTML><HEAD></HEAD><BODY><P>When the array starts up in secure mode you will need to log into the UI (GUI or CLI) and enter your passphrase before it will start allowing FC or ISCSI connections to the volumes.</P></BODY></HTML> Thu, 28 Sep 2017 21:51:17 GMT jharris-itguy16 2017-09-28T21:51:17Z Startup encryption https://community.hpe.com/t5/array-performance-and-data/startup-encryption/m-p/6982155#M141 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I am setting up an array and encryption is a requirement. For the startup mode in Secure, do this mean the UI comes up fully and is manageable and you just have to put in the passphrase to access the volumes, or on startup, you have to put in the passphrase?</P></BODY></HTML> Wed, 27 Sep 2017 18:12:37 GMT https://community.hpe.com/t5/array-performance-and-data/startup-encryption/m-p/6982155#M141 tshipp118 2017-09-27T18:12:37Z Re: Startup encryption https://community.hpe.com/t5/array-performance-and-data/startup-encryption/m-p/6982156#M142 <HTML><HEAD></HEAD><BODY><P>When the array starts up in secure mode you will need to log into the UI (GUI or CLI) and enter your passphrase before it will start allowing FC or ISCSI connections to the volumes.</P></BODY></HTML> Thu, 28 Sep 2017 21:51:17 GMT https://community.hpe.com/t5/array-performance-and-data/startup-encryption/m-p/6982156#M142 jharris-itguy16 2017-09-28T21:51:17Z