topic iSCSI From VMware Multipathing in Array Setup and Networking

iSCSI From VMware Multipathing

Anu Pillai — Thu, 24 Oct 2013 06:01:12 GMT

Hi,

We have nimble connected to HP Blade servers and the person who had setup has left the company

How do I check if the iSCSI from vmware have multipathing

Thanks

Re: How do I check if the iSCSI from vmware have multipathing

aaron58 — Thu, 24 Oct 2013 17:10:33 GMT

View your storage adapters in the vSphere client and right click on the volume(s) in question. Left click on Properties. If your path selection is set to Round Robin, you will see multiple paths that display "Active (I/O)". If you see this, multipathing is enabled.

Re: How do I check if the iSCSI from vmware have multipathing

Anu Pillai — Thu, 24 Oct 2013 22:46:12 GMT

Hi Aaron,

Thank you very much for the reply. I went to

Inventory > Datastores and Datastore Clusters > Configuration > Select a datastore > Datastore Details > Properties > Manage paths > path selection >

some of the datastore has MRU and one has Nimble_PSP_Directed and other has fixed