topic Creating a Datastore on the Nimble via vCentre in Array Setup and Networking

Creating a Datastore on the Nimble via vCentre

cdrummond71 — Thu, 14 Aug 2014 15:30:12 GMT

Morning,

Just setting up our Nimble and the Nimble is named 911Nimble so I would like to create datastores within it named Nine11v1, Nine11v2 and so on. When I go through the vCentre client to create them and get to the end I get an error that says "Name uses only number, letters, dashes and dots. Length must be 4-42 characters inclusive. Name cannot start with punctuation or numbers" Nine11v1 is more then 4, less then 42 characters and does not start with a number. Anyone have any suggestions?

Thanks

Re: Creating a Datastore on the Nimble via vCentre

rlabarre65 — Thu, 14 Aug 2014 18:00:36 GMT

Good afternoon Chris.

Is it failing for creating the name on the very first Tab, which is "NEW DATASTORE" as you go to click next?

or is it letting you go all the way through the setup , including protection templates etc before it fails out.

Thank you for posting your question/concerns. We will do our absolute best to get a timely response.

Re: Creating a Datastore on the Nimble via vCentre

cdrummond71 — Thu, 14 Aug 2014 18:07:47 GMT

Hi Ryan,

I get to the end and click Finish and get the attached.

Re: Creating a Datastore on the Nimble via vCentre

rlabarre65 — Thu, 14 Aug 2014 18:32:08 GMT

Chris.. thank you for your quick response.

I just tested this in my own lab and did not have any issues.

It may appear as though it is the default response, but I would engage support on this issue.

You can do so by emailing support@nimblestorage.com or calling 1-877-364-6253

EDIT: Any chance there is a space at the end of the name? just a thought, as it did work for me.

Thank you

Re: Creating a Datastore on the Nimble via vCentre

tmoore106 — Thu, 21 Aug 2014 02:36:13 GMT

Chris, I just created a volume named Nine11v1 on my array (NOS 2.1.4) with my vmware (5.1u1) plugin with no issues. I would check for a space like Ryan mentioned, and if there wasn't, then reach out to support so they can look at more verbose logging to determine what the bunk was.

Re: Creating a Datastore on the Nimble via vCentre

virat88 — Mon, 25 Aug 2014 16:49:31 GMT

This is a known bug in 2.1.x

Bug Descrpition

When trying to create a datastore, after clicking finish in the wizard, you get the following error message: "Name uses only number, letters, dashes and dots. Length must be 4 to 42 characters inclusive. Name cannot start with punctuation or numbers." The error message applies to volume collection involved and not the datastore name. (We should not be validating the name of a volume collection that already exists)

Workaround

This only happens when you are joining a volume collection whose name does not satisfy the criteria in the error message. Change the name of the volume collection that the datastore will join to satisfy the criteria in the error message.

In this case, the name of the volume collection is "911Every5Hours". Change it to "Nine11Every5Hours" and it should work.

Virat

Re: Creating a Datastore on the Nimble via vCentre

wvanhoolst45 — Tue, 26 Aug 2014 08:01:25 GMT

This is indeed seen before.

It appears that the plugin also uses the VolCol name length in its checks at the end of the Wizard , in this case I had used a 3 character VolCol that I created earlier, outside of the plugin.

Editing the VolCol to >3 valid characters will apparently fix the issue. (Will recall this email if I find it doesn’t work!).

If you create the VolCol within the plugin, it makes sure the name is >3 characters!