topic Re: CS420 Lifecycle in Array Setup and Networking

CS420 Lifecycle

J Benway — Wed, 06 Apr 2016 19:36:25 GMT

I was wondering if nimble has a life cycle document for the CS420 so I know how much longer it is expected to be support and when the EOS/EOL will be for this model.

thanks,jb

Re: CS420 Lifecycle

Nick_Dyer — Thu, 07 Apr 2016 07:19:35 GMT

Hi Jason,

if you head to Infosight->Documentation you'll find a section called Support Policies link. In there you should find the End of Availability notice of the CS200/CS400, as well as our overall Support Policy for hardware and software.

To summarise both documents, the policy is that we will allow customers to purchase another FIVE years of support from the day a system is made End of Availability, The CS220/240/260/420/440/460 was made End of Availability on Dec 11th 2014, so that means we will support them for hardware break/fix but also current and new software features, up to Dec 11th 2019.

Hope that answers your question?

Re: CS420 Lifecycle

J Benway — Thu, 07 Apr 2016 12:07:08 GMT

I looked at infosite before posting ☺ just didn’t look all the way in the top right corner for the drop down.

Thank you.

Re: CS420 Lifecycle

julez66 — Mon, 11 Apr 2016 18:45:25 GMT

Just an FYI Jason, we just completed an upgrade from a CS260G to a CS500 in case you ever plan on extending that life cycle and picking up some of the new features like being able to add more than 3 shelves.

It requires an outage, but we had no problems doing the upgrade. The controller swap went flawlessly.

We're doing our secondary site this weekend.

Re: CS420 Lifecycle

J Benway — Mon, 11 Apr 2016 18:59:26 GMT

thanks, I'll keep that in mind. too bad it required an outage

I thought that was one of the selling points because of the dual controllers? Its been awhile

Re: CS420 Lifecycle

jstinson105 — Mon, 11 Apr 2016 19:11:42 GMT

I also thought a controller upgrade was supposed to be nondisruptive. Maybe the age difference was too great? Perhaps an SE can weigh in on this?

Re: CS420 Lifecycle

rugby0134 — Mon, 11 Apr 2016 19:18:59 GMT

The upgrade from 200/400 series to a 300/500/700 requires an outage because we changed the bus inter-connect to a higher capacity connection. This change in architecture cannot be done live.

Re: CS420 Lifecycle

J Benway — Mon, 11 Apr 2016 19:22:12 GMT

Thanks for the quick and detailed response!

Re: CS420 Lifecycle

julez66 — Mon, 11 Apr 2016 20:28:59 GMT

Yep what Kevin said.
We knew that going into this specific upgrade.
We weren't looking for just a performance upgrade, we were looking at adding in a 4th shelf as well (AFS actually) as well as the possibility for capacity expansion beyond what we have. And honestly the actual upgrade of the controllers took maybe an hour at the most? And we added the AFS after we did the CS260 > CS500 as well.

Of course shutting stuff down took longer