topic Ubuntu configuration script for iSCSI in Array Setup and Networking https://community.hpe.com/t5/array-setup-and-networking/ubuntu-configuration-script-for-iscsi/m-p/6986898#M2086 <HTML><HEAD></HEAD><BODY><P>I was working with a customer who uses Ubuntu Servers with LXC.</P><P>To make his life easier I created the attached script.</P><P></P><P>This script can:</P><P>&nbsp;&nbsp;&nbsp;&nbsp; - Install and configure <SPAN class="command cmd">open-iscsi</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Install and configure multipathd</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Show the host IQN</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Connect a Nimble Volume (and adjust the ACL beforehand)<BR /></SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Disconnect a Nimble Volume</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Show active iSCSI sessions</SPAN></P><P></P><P>It has been tested with Ubuntu Server 14.04 and 16.04.</P><P></P><P>Please note: THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND</P></BODY></HTML> Wed, 29 Jun 2016 11:13:01 GMT pflammer23 2016-06-29T11:13:01Z Ubuntu configuration script for iSCSI https://community.hpe.com/t5/array-setup-and-networking/ubuntu-configuration-script-for-iscsi/m-p/6986898#M2086 <HTML><HEAD></HEAD><BODY><P>I was working with a customer who uses Ubuntu Servers with LXC.</P><P>To make his life easier I created the attached script.</P><P></P><P>This script can:</P><P>&nbsp;&nbsp;&nbsp;&nbsp; - Install and configure <SPAN class="command cmd">open-iscsi</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Install and configure multipathd</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Show the host IQN</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Connect a Nimble Volume (and adjust the ACL beforehand)<BR /></SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Disconnect a Nimble Volume</SPAN></P><P><SPAN class="command cmd">&nbsp;&nbsp;&nbsp;&nbsp; - Show active iSCSI sessions</SPAN></P><P></P><P>It has been tested with Ubuntu Server 14.04 and 16.04.</P><P></P><P>Please note: THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND</P></BODY></HTML> Wed, 29 Jun 2016 11:13:01 GMT https://community.hpe.com/t5/array-setup-and-networking/ubuntu-configuration-script-for-iscsi/m-p/6986898#M2086 pflammer23 2016-06-29T11:13:01Z