https://community.hpe.com/t5/array-setup-and-networking/hyper-v-server-2016-and-nimbleos-3-9-or-4-5/m-p/7005426#M2202 <P>Hello</P><P>I certainly would look to go to 4.5.2.0 - it's a very stable release, and is full of good features such as the Hyper-V Consistent Snapshot/Replication/Clone capability.</P><P>Technically, Windows 2016 is supported on every NimbleOS release from 3.4.x onwards - so the choice is ultimately yours... but I know which one i'd choose :)</P> Thu, 10 May 2018 16:36:50 GMT Nick_Dyer 2018-05-10T16:36:50Z https://community.hpe.com/t5/array-setup-and-networking/hyper-v-server-2016-and-nimbleos-3-9-or-4-5/m-p/7005317#M2201 <P>We are running a 17-node Hyper-V Server 2012 R2 cluster today that connects to a Nimble CS300 over iSCSI. The Nimble CS300 is running NimbleOS 3.7. In the near future, we'll be replacing some of our Hyper-V 2012R2 hosts with Hyper-V Server 2016. Should I stick with 3.x and upgrade to 3.9 LTSR or upgrade our array to NimbleOS 4.5? We don't plan to switch all of our hosts over 2016 right away and I expect both 2012R2 and 2016 hosts to communicate with our array.</P> Wed, 09 May 2018 19:11:05 GMT https://community.hpe.com/t5/array-setup-and-networking/hyper-v-server-2016-and-nimbleos-3-9-or-4-5/m-p/7005317#M2201 msliva 2018-05-09T19:11:05Z https://community.hpe.com/t5/array-setup-and-networking/hyper-v-server-2016-and-nimbleos-3-9-or-4-5/m-p/7005426#M2202 <P>Hello</P><P>I certainly would look to go to 4.5.2.0 - it's a very stable release, and is full of good features such as the Hyper-V Consistent Snapshot/Replication/Clone capability.</P><P>Technically, Windows 2016 is supported on every NimbleOS release from 3.4.x onwards - so the choice is ultimately yours... but I know which one i'd choose :)</P> Thu, 10 May 2018 16:36:50 GMT https://community.hpe.com/t5/array-setup-and-networking/hyper-v-server-2016-and-nimbleos-3-9-or-4-5/m-p/7005426#M2202 Nick_Dyer 2018-05-10T16:36:50Z