Cli to remove host access from volumes

Ahopelessadmin — Thu, 07 Nov 2019 14:43:01 GMT

Need to remove a lot of host access from volumes in Nimble. Struggling to find the documentation anywhere, can anyhelp with either the command itself or point me at the documentation.

Either cli or powershell module...

Thanks

Re: Cli to remove host access from volumes

veeyarvi — Tue, 12 Nov 2019 07:36:13 GMT

Hi Ahopelessadmin ,

You may find the version 2.3 of the command line reference here - https://community.hpe.com/hpeb/attachments/hpeb/array-setup-networking/891/1/pubs_command_reference_2_3.pdf

As I understand from other posts, you may Log into the Nimble Infosight portal, and go to the Downloads section. The Nimble CLI Reference document is the 2nd item listed.

Please check

topic Re: Cli to remove host access from volumes in Array Setup and Networking

Cli to remove host access from volumes

Re: Cli to remove host access from volumes