https://community.hpe.com/t5/array-setup-and-networking/nimble-static-routing/m-p/7085211#M2545 <P>we have 2 nimbles at 2 locations with 2 adapters each, we are trying to get them to talk- no issues with the routing on the network between them. It looks like the static routes on the NICs are not working- only good to each router gateway. Also, the 2nd NIC on each has a default route set by default and is used for management only.. Is there something we are missing to activate the static routes? Thanks</P> Fri, 17 Apr 2020 16:51:29 GMT SJKNDY 2020-04-17T16:51:29Z https://community.hpe.com/t5/array-setup-and-networking/nimble-static-routing/m-p/7085211#M2545 <P>we have 2 nimbles at 2 locations with 2 adapters each, we are trying to get them to talk- no issues with the routing on the network between them. It looks like the static routes on the NICs are not working- only good to each router gateway. Also, the 2nd NIC on each has a default route set by default and is used for management only.. Is there something we are missing to activate the static routes? Thanks</P> Fri, 17 Apr 2020 16:51:29 GMT https://community.hpe.com/t5/array-setup-and-networking/nimble-static-routing/m-p/7085211#M2545 SJKNDY 2020-04-17T16:51:29Z