Unable to re-setup Nimble CS235 - EULA error

MoyneIT — Mon, 29 Mar 2021 23:45:42 GMT

Redeploying 2x of our old CS235. I've reset both units using the following command:
array --resetup
I've then used the Nimble Setup Manager to re-configure one of the arrays but cannot setup the second as I get the following error:

Could not get End User License file for Nimble Array:AF-126123.
Make sure that the array is powered on and connected to the subnet.
If the problem persists, contact Numble Support.
Error:Management Web Service with SSL call failed to get EULA with SOAP error:28,
SOAP 1.1 fault: SOAP-ENV:Client [no-subcode]
"SSL initialization Timeout"
Detail:SSL connect failed in with SSL
Error:SSL_ERROR_ZERO_RETURN (6), Windows socket error code:0

I've attempted setting this one up on an isolated network away from our production environment and continued to received the same error. Unsure how to proceed as I can't find any FAQ's relating this error.

Re: Unable to re-setup Nimble CS235 - EULA error

MoyneIT — Tue, 30 Mar 2021 02:44:50 GMT

Resolved - Used a newer version of the "Nimble Setup Manager" which redirected to a webgui using what looked to be an IP address similar to a windows device that has no assigned IP. Through this webGui, we were able to successfully setup the device without any error messages.

topic Re: Unable to re-setup Nimble CS235 - EULA error in Array Setup and Networking

Unable to re-setup Nimble CS235 - EULA error

Re: Unable to re-setup Nimble CS235 - EULA error